PRO SIGNAL PSG3448 User manual

1
1x8 4Kx2K SPLITTER OVER CAT5/6
PSG3448
The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

2
IMPORTANT SAFETY INFORMATION
Please read these instructions carefully before use and retain for future reference.
When using electrical appliances basic safety precautions should always be followed.
• To prevent fire or shock hazard, do not expose this product to rain or moisture.
• Check that the power supply matches the mains voltage.
• Only use the power supply provided or one of identical specification.
• Ensure the IR remote extender cables are connected to the correct devices.
• Beware of static electricity which may damage the device. Use ESD precautions
when installing.
• Do not plug or unplug cables while the devices are powered on.
WHAT'S INCLUDED
• 1 x HDMI splitter, 8 x receivers
• 9 x Power Adapter 230VAC to 5VDC 2A
• Operation Manual
• 1 x IR remote transmitter, 8 x IR receivers
• Distribute 1 HDMI source to 8 HDMI outputs.
• Supports full HD resolution 1080p@60Hz and 4K@30Hz..
• Plug and play setup.
• Convenient rack mount design.
FEATURES
Transmitter
CAT CABLE REQUIREMENT
Follow the standard of IEEE-568B, It is recommended to select a high quality network
cable with less loss and crosstalk.
1 Orange/White
2 Orange
3 Green/White
4 Blue
5 Blue/White
6 Green
7 Brown/White
8 Brown
OVERVIEW

3
INSTALLATION
• Connect the HDMI input on the splitter with the source device.
• Connect the splitter TX RJ45 output ports to the receivers either using CAT5 or
better cable.
• Connect the IR receivers to each HDMI receivers and the IR transmitter to the
splitter.
• Connect the receiver HDMI outputs to the destination display devices.
• Connect the power supply output to the switch 5V DC inputs and the 5V DC inputs
on the receivers then connect all the PSU to the mains and turn on the power. The
power LED on the front panel will illuminate.
This HDMI splitter allows a source HDMI signal to be split to 8 receivers and displays
over a range of up to 120meters at 1080p resolution using a CAT5/5e/6 network cable.
Requirements:
1. HDMI source device (PC, DVD, PS3) HD monitoring equipment etc.
2. Up to 8 HDMI display devices eg: SDTV, HDTV, projector with HDMI port.

4
SPECIFICATIONS
Voltage/Current DC 12V 2A
Power consumption <24W
HDMI compliance HDMI 1.4
HDCP compliance HDCP 1.4
HDMI resolution 480i@60Hz, 480p@60Hz, 576i@50Hz, 576p@50Hz,
720p@50/60Hz, 1080i@50/60Hz, 1080p@50/60Hz
4Kx2K@24/25/30Hz
IR signal Support 20~60kHz IR device
Network CAT5/5e/6 <80m/<100m/<120m
Working temperature 0~60°C
Storage temperature -30~ 70°C
Humidity 0~90%RH (no condensation)
Dimension (splitter) 483(W) x 110(D) x 45(H)mm
Material Alloy
Weight (splitter) 1390g
IR User Guide:
• IR receiver extension cable should be connected to the IR IN port of the receiver.
• The IR emitter extension cable should be connected to the IR OUT port of the
transmitter.
• The emitter of the IR extension cable should face as close as possible to the IR
receiving window of the source device.
• Face the receiving head of the IR receiver extension cables toward the user for
unobstructed line of sight to the remote control.
• The IR receiver detects the users remote control and transmits the signal down the
network cable to the IR emitter which replicates the IR output to control the source
device.
CLEANING & MAINTENANCE
Clean the outside casing with a soft cloth lightly moistened with mild soap and water.
Never use any abrasive or solvents.
CPC Farnell declares that the radio equipment for wireless transmitter/receivers is in
compliance with Radio Equipment Directive 2014/53/EU
Man Rev 1.1
INFORMATION ON WASTE DISPOSAL FOR CONSUMERS OF ELECTRICAL &
ELECTRONIC EQUIPMENT.
When this product has reached the end of its life it must be treated as Waste Electrical
& Electronic Equipment (WEEE). Any WEEE marked products must not be mixed with
general household waste, but kept separate for the treatment, recovery and recycling of
the materials used. Contact your local authority for details of recycling schemes in your
area. Made in China.
PO Box 13362 Dublin 2
PR2 9PP