PROAIM CINEMA Series User manual

1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is
listed below.
Pro Camera Vibration Isolator,15-30kg (VI-PP-02)
A s s emb l y Ma n u a l
3 x 2.5mm, 3mm, 5/16'' Allen keys
Proaim Pro Vibration Isolator
with Ronin Mounting Plate
DJI-QR Ronin
Top plate of Isolator
Passive Plate
Square O-Rings
Pan Barrel Polymer
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.

2
Loosen the side lock lever & insert your
gimbal then again lock the lever to secure
it. If ronin plate look loose then tighten the
side allen bolt.
Vibraon Isolator Setup
NOTE: Attach Isolator with Proaim Airwave
Vibration Isolator Arm then secure with
provided screws
NOTE: The isolator can be fixed both Over Slung
and Under Slung, as per your requirement
Begin by taking out the mainframe from the
case.
Aach DJI-QR Ronin plate with top plate of
Vibraon Isolator with the provided screws
& allen key.
Loosen allen bolts on top Plate with the
help of allen key and remove the plate.
Your equipment will look as shown in
image.
NOTE: Vibration Isolator can also be customized with different payloads for using with lightweight set-ups
from 15-30kg / 33-66lb.

3
Now reduce the rings set in center of the
Vibration Isolator as per your payload
requirement. Then similarly follow the back
steps to assemble the Vibration Isolator.
Turn the Isolator upside-down & loosen the
bolts to remove Square-O-Rings from the
Isolator.
•There are many dierent holes at the top
and boom side of vibraon isolator plate to
mount dierent accessories.
1/4”-20 hole is for DJI-QR Ronin Plate
M4 or M3 hole is for MOVI Mount
Be sure to mount your Gimbal Camera Setup
securely.
Loosen all allen bolts with help of provided
allen key as shown in images.
Remove the Passive Plate from the Frame as
shown in the image.

4
YOUR PROAIM PRO CAMERA VIBRATION ISOLATOR
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our
utmost support and care unl you use our product.