PROAIM P-CST User manual

1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that
is listed below.
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
Heavy-Duty 150mm Camera Tripod Stand
with Spreader (P-CST)
Assembly Manua l
150mm Camera Tripod Stand Aluminum Tripod Spreader
Note: If you have purchased ( P-CST-150 ) kit, you will receive the following:

2
 Firstly, take out the Aluminum tripod spreader,
spread it on the oor and then open its legs
(as per your requirement) and secure with the
help of provided knobs.
 Take out the Aluminum Tripod Stand, spread
the stand legs over its spreader and secure it
with the provided knob.
 Aer mounng the Aluminum Tripod Stand
lock it in place with the rubber grips as shown
in the image.
Aluminum Tripod Spreader Setup
150mm Camera Tripod Stand
Note: If you have purchased (P-CST-150-BLK) kit, you will receive the following:
Proaim Heavy-Duty 150mm Camera Tripod
Stand (P-CST-150-BLK )
Aluminum Tripod Spreader

3
YOUR PROAIM HEAVY-DUTY 150MM CAMERA TRIPOD STAND WITH SPREADER
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our
utmost support and care unl you use our product.
 To adjust the height of the tripod, loosen all
three adjustment knobs. You can adjust the
tripod up to the desired height and then
re-ghten the knobs securely.
 At last, your Tripod Stand with Spreader is
fully assembled as shown in the image.