PROAIM CINEMA VCTR-TH User manual

1
What’s In The Box
Dual Tripod Holder For Camera Cart (VCTR-TH)
Assembly Manua l
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
1 x 38mm (ID)
Clamp
1 x Pair Tripod
Holder
Tripod Holder Bar with Clamp
38mm (OD) Dia Mast Accessory Cross Bar with Clamp
5mm, 6mm Allen key
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.

2
• Aach the clamp to the boom crossbar and
secure it properly using both the knobs.
• Remove both the knobs of the 38mm (ID)
clamp.
Tripod Holder Setup
• Image showing clamp aached to the
crossbar.
• Insert the 38mm (OD) mast into the clamp
hole on the boom crossbar.
Rod Mounng
• Loosen the side clamp knobs of the accessory
crossbar and mount the crossbar on the side
rods of the cart.
• Align the crossbar and secure it by ghtening
the side clamp knobs.

3
• Insert and ghten the knob to secure the
tripod holder properly.
• Slide and mount the tripod holder on the
tripod holder bar.
• Repeat the process for the other tripod
holder.
• Loosen the ratchet knob and open the clamp
on the tripod holder bar.
• Tighten the ratchet knob of the top accessory
crossbar clamp as shown in the image.
• Mount the tripod holder bar on the 38mm
mast and ghten the ratchet knob.
• Remove the knob of the tripod holder.
Tripod Holder Mounng

4
• Both the tripod holders are correctly aached
to the cart, as shown in the image.
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our utmost
support and care unl you use our product.
YOUR PROAIM DUAL TRIPOD HOLDER FOR CAMERA CART
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
NOTE: Proaim Dual Tripod Holder for Camera
Cart is a perfect add-on accessory to carry or
store two full-size tripods on the cart.