PROAIM P-WV-2PL-PP User manual

Instruction Manual
10' Wave-2 Camera Jib Crane
(P-WV-2PL-PP)

2
Subject Page
Foreword 3
Introducon 4
Assembling 5-8
Warranty 9
At Proaim, our goal is to ensure 100% Customer Sasfacon in all that we do.
We back our sales with a 1 year warranty from the date of purchase and work hard
to resolve any problems in the unlikely event one should arise.
With our commitment to connuous improvement and your Feedback, building on
our reputaon of providing aordable, quality products is
PRIORITY #1.
Table of Contents

3
Dear Client,
On behalf of all the people that work so hard to provide you with the most
up-to-date, exible and cost-ecient producon gear, we would like to welcome
you into the Proaim family.
By purchasing your Proaim 10' Wave-2 Plus Telescopic Jib Arm Crane Film
Producon Package, you have just joined a host of designers, engineers, machinists,
assembly, customer service and oce sta that take great pride in all that they do.
Our mantra of connuous improvement has been the guiding principle of how we
conduct our business since day one.
Once you have the opportunity to experience your new Proaim 10' Wave-2 Plus
Telescopic Jib Arm Crane Film Producon Package, we hope you will agree that we
cra quality products at a compeve price. Products designed to meet and
exceed the standards of today’s real producon world.
Standards set by our valued clients and standards we strive to maintain.
With Best Wishes,
Proaim Team
Welcome To Proaim!

4
Introducon
PROAIM welcomes you to the new and modernized era with its Proaim 10' Wave-2
Plus Telescopic Jib Arm Crane with CST-100 Stand, Portable Dolly, SR. Panlt head &
Zoom Controller a portable lming soluon to increase your producon value. The
Robust jib crane is specically designed travel crane for indoor & outdoor video
producons. Its telescopic arm feature adds exibility to frame perfect shots in
indoor and outdoor spaces. This video producon package includes a rugged
camera dolly for smooth, dynamic moving shots and rock solid aluminum tripod
stand for immense support. Now you can create the visual eects and produce
Incredibly smooth oang camera crane shots that add value to your lming
producons and bring a quick return on your investment.
Please inspect the contents of your shipped package to ensure you have received
everything that is listed below.
What’s In The Box
Storage Bag
Wave-2 Plus Camera Jib Arm
With ϭϬϬmm Bowl Adapter
WŽƌƚĂďůĞŽůůLJǁŝƚŚ
^dͲϭϬϬŵŵŽǁůdƌŝƉŽĚƐƚĂŶĚ
Flat Base Plate
100 mm Bowl
75mm Conversion
^ƌWĂŶdŝůƚ,ĞĂĚ
Aluminum Spreader
Proaim Lanc Zoom Controller
Weight Bar
Weight Closer
Allen key
Joystick Controller

5
In case of spreader, Take out the Spreader and spread it on floor and open the legs (as per
your requirement) of spreader with the help of provided knob.
Now mount the Tripod Stand on Spreader, lock it in place with the rubber grips.
In case of Dolly, Take out the bolt from the center of dolly and spread it on oor. Then put
the bolt back through the center of dolly again.
ALUMINUM TRIPOD SPREADER

6
Now mount the Tripod Stand on Dolly, lock it in place with the rubber grips.
Adjust riser height of Tripod by loosening lock controls located on each leg, slide the stand
up to a desired level posion and lock leg extensions in place to secure.
Now aach the central fork with the tripod bowl, then aach boom clamp to secure it
well.

7
NOTE: It is important to make sure that the Central Fork is seated in the bowl properly. That
means perpendicular to the tripod bowl. O axis installaon may hamper movement of the jib.
Also you may need the assistance of a grip stand to hold the camera end of the arm during
installaon prevenng it from falling as it will be front heavy at this point. You may also need
the grip stand or assistance at the rear of the jib when mounng the camera.
Unscrew the knob to extend jib arm at back and reghten the knob. Secure all the
connecons.
Insert the weight bar into the jib arm.
Now slide in weight to it as per your requirement and screw in weight closer
properly.(Counter weight Not Included)

8
Loosen the knobs of Jib arm to extend the front telescopic post of the Jib.
Extend the Jib as per your requirement and ghten all the knobs to secure.
Loosen the bolts and remove the 100mm bowl.

Attach the flate base plate and secure by tightening the bolts and then attach the Pan Tilt
Head and secure by tightening the bolts.
Mount Sr. Pan Tilt Head, follow these steps:
•Now, mount your camera with camera
mounting screw on Pan Tilt Head.
Note: For the underslung camera
setup, attach the flat base plate to the
bottom of the jib camera mount and
then mount the camera setup. Secure
the camera properly.
•
For 100mm fluid head setup mounting, attach the 100mm bowl on the top, mount the camera
setup and secure it properly.
•

Balancing Tips :
Camera Weight
Counter Balance
1kg 2kg 3kg 4kg 5kg
2kg 4kg 6kg 8kg 10kg
9
PROAIM 10' WAVE-2 CAMERA JIB CRANE
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our
utmost support and care unl you use our product.