PROAIM CINEMA ST-ISOD-01 User manual

1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is
listed below.
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable
copyright statutes or in wring by the Publisher.
Assembly Manua l
ISO Dampener Mitchell Mount (ST-ISOD-01)
ISO Dampener
Castle Nut Wrench
Hard Case

2
ISO Dampener Setup
 Firstly, remove Castle Ring from ISO
Dampener.
NOTE: The ISO Dampener is exible enough
so you can easily lt it up & down on any side.
Safety Hints
ATTENTION: PLEASE READ THIS BEFORE USING TO PREVENT SERIOUS DAMAGE TO THE
GEAR!
DO NOT FORGET TO SECURE THE EQUIPMENT
The Dampener must be carefully locked while seng-up with any equipment.
NEVER LEAVE THE FASTENERS LOOSE
Always ghten the locking knobs properly for giving security to camera setup.
BE HIGHLY VIGILANT OF FRICTION ADJUSTMENT
When you are adjusng either Roll Axis / Pan Axis, make sure that the Fricon adjustment of
both dampers must be same.
FOLLOWING THESE GUIDELINES WILL PROVIDE BETTER SHOTS AND TROUBLE-FREE
OPERATION.
SHOULD YOU NEED ADDITIONAL INFORMATION, TECHNICAL ASSISTANCE IS AVAILABLE
‘ONLINE’ BY CONTACTING YOUR SALES REPRESENTATIVE.
 Aach ISO Dampener with Vibraon Isolator
Plate (Not Included) and ghten Castle Ring
from top with the help of Castle Nut Wrench.

3
 Now connect any Remote Head
(Not Included) with ISO Dampener and
ghten Castle Ring with the help of Castle
Nut Wrench.
YOUR PROAIM ISO DAMPENER MITCHELL MOUNT
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our
utmost support and care unl you use our product.