PROAIM P-FK-BL User manual

1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that
is listed below.
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
Flyking Bowl Camera Slider (P-FK-BL)
A s s e m b l y M a n u a l
Flyking Precision Camera Slider Bag Packing
Crossbar
Feet
75mm
Conversion
Ring
Female Adapter
Male Adapter
3/8” Threads
+=
10.5cm
4.5cm
Available Sizes: 2, 3 and 4

2
 Remove bolt from Hub Locking Knob, and
insert into the boom of slider by twisng it.
 Loosen the knob to move top plaorm and
ghten it to lock the top plaorm when you
need stac shots or while transportaon.
 Mount the Slider on 100mm Tripod Stand
(Not Included) and ghten Hub Locking Knob
to secure it on stand.
Flyking Slider on Bowl Stand - Setup
 For 360° Rotaon of Slider, loosen the black
knob as shown in image.
 Now ax your Bowl Mount Fluid Head
(Not Included) on Slider for mounng camera
setup, and secure it properly.

3
YOUR PROAIM FLYKING BOWL CAMERA SLIDER
ALL DRESSED UP AND READY TO GO!
 Aach Quick Release Plate of Tripod Head
with 3/8”-16 thread, onto the end foots of
Slider.
 Now mount the Slider on Tripod Head and
lock it properly to ensure a secure
connecon.
Flyking Slider on Two Tripod Stand - Setup
NOTE: Mount the Slider on any stand with
3/8”-16 thread.
QUICK TRIPOD ATTACHMENT SAVES PRODUCTION TIME

4
 Directly mount the Slider onto C-Stand
(Not Included), without any Quick Release
plate.
Flyking Slider on C-Stand - Setup
 Aach each of the two Cross Bars on each
side of Slider and ghten them accurately
with allen key.
End Feet Setup
 Insert the four End Feet on all the corners of
Crossbars and ghten knob to secure them.
 Loosen red knob at End Feet to adjust the
height, according to your setup requirement.
QUICK ATTACHMENT SAVES PRODUCTION TIME

5
YOUR PROAIM FLYKING BOWL CAMERA SLIDER
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our
utmost support and care unl you use our product.