PROAIM P-TP-100-B User manual

1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
Assembly Manual
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
100mm Bowl Head Tripod Stand With Rubber
Tripod Shoes (P-TP-100-B)
Bag Packing
3 x Proaim Rubber Tripod Shoes
100mm bowl Tripod Stand

2
Tripod Stand Setup
• Aach a rubber tripod shoe to the boom legs
of the stand. Then, pull the rubber tripod shoe
grips & secure it.
• Then, spread the Mid-Level Spreader of the
tripod according to your requirements and
secure properly with the help of the provided
knobs.
• To adjust the height of the tripod, loosen all
three adjustment knobs. You can adjust the
tripod up to the desired height and then
re-ghten the knobs securely.
NOTE: Tripod is an extremely stable plaorm
with an incredible height range of 31”-53”.
Equipped with quick horizontal locking knobs,
the tripod legs oer easy funconality and
secure height adjustments.
• Properly spread and open all the legs of the
tripod stand.
• Follow the same above process to aach the
remaining Rubber Tripod Shoes.
NOTE: its feet have quick ''on-o', rubber grip
shoes which are custom-made to stabilize and
strengthen the tripod.

3
• Then, properly ghten and secure the knob of
the Fluid Head (Not Included) from the
boom.
• Remove the knob of the 100mm Bowl Fluid
Head (Not Included) and mount it on the Tri-
pod Stand.
• Then, aer removing the camera plate, aach
it to the boom side of the Camera
(Not Included).
• Aer aaching the camera plate to the
camera (Not Included), secure it with the help
of a screwdriver. Pull the knob of the uid
head, then mount the camera (Not Included),
as shown in the image.
• Pull and release the Fluid Head knob and then
remove the camera plate.
• To secure the camera (Not Included), pull and
ghten the knob of the Fluid Head.
NOTE: Precisely engineered with High-Grade
CNC Aluminum, it is solid and easily
accommodates a payload of up to 80kg /176lb at
minimum height & 25kg / 55lb at maximum.

4
YOUR PROAIM 100MM BOWL HEAD TRIPOD STAND WITH RUBBER TRIPOD SHOES
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our utmost
support and care unl you use our product.