PROAIM SR-SBP-02 User manual

1
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
Assembly Manua l
Base Plate 2 x Handles
Quantum Magnec Shoulder Rig w VCT
Base Plate (SR-SBP-02)
2 x 15mm Dia, Length
200mm Long Female Rods
2 x 15mm Dia, Length
300mm Long Female Rods

2
• Loosen the knob on the other side of the base
plate and insert the 300mm long rod.
• Then insert the second 200mm long rod and
ghten it properly with the knob, as shown in
the image.
NOTE: It has dual slots that allows quick
posioning of your camera & camera
accessories.
• Now aach the handle and ghten the ratchet
knob properly.
• Loosen the knob of the base plate and insert a
200mm long rod.
• Then insert the second 300mm long rod and
ghten the knob properly, as shown in the
image.
NOTE: There are 15mm (dia) rods on the front
and back to accommodate more camera
accessories.
Quantum Magnec Shoulder Rig Setup

3
NOTE: It allows your camera set up to sit
comfortably on your shoulders by eliminang
the discomfort caused by the camera's weight
on your shoulder during shoong.
• By pressing the adjustment knob, the angle of
the handle can be changed according to your
requirement, as shown in the image.
• Mount the camera (Not Included) on the
shoulder pad and ghten it properly with the
help of a screwdriver.
NOTE: The shoulder plate has 1/4"-20 and
3/8"-16 threaded holes for storing addional
screws. It has a 3.5" long slot that allows quick
posioning of your camera & accessories to
evenly distribute the weight of your camera.
• Then aach the second handle and ghten it
properly.
• Open the shoulder pad, as shown in the
image.
NOTE: It has a magnet mount system that allows
easy access to the camera screws just by ipping
the camera base plate.

4
YOUR PROAIM QUANTUM SHOULDER RIG W VCT MOUNT
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
NOTE: Shoulder base plate also supports RED
(DSMC2), Arri (Amira and Alexa Mini), Sony
(Venice, FS7, FS7M2, F5, F55, EX1, EX3), Canon
(C200, C300, C300M2, C700), Panasonic (EVA1,
Cinema Varicam LT 4k S35), Blackmagic (Ursa
Mini), and many other camera models with
interchangeable lenses.
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our utmost
support and care unl you use our product.