ProfiTap C1-100 User manual

CUSTOMER SUPPORT INFORMATION
To order or for a technical information support:
Phone: [phone] or
Fax: [phone]
Mail order: COMCRAFT
17A, rue des Frères Lumière
67201 Eckbolsheim - France
Website: www.profitap.com
E-mail: [e-mail]
C1-100
10-100 Mb Ethernet Copper Tap
Portable Model C1P-100
Rack Mount Model C1R-100

www.profitap.com Page 2
Index pages
1. General Information 3
2. Functional Description 4
2.1. Interface connectors 4
2.2. Activity/Link 4
2.3. Power 4
2.4. Power Failure 4
3. Installation 5
4. Rack modules 6
5. Additional information 7

www.profitap.com Page 3
Portable model
1. General Information.
C1-100 tap avoids downtime in your 10/100BaseT networks.
Once in place it enables you to monitor full and half duplex
communication and move test equipment without breaking the
circuit. It mirrors any packet size, bad CRC, VLAN traffic, sees
both ends of full-duplex links.
It is a single port 10BaseT/100BaseTX Tap for half/full duplex
Ethernet networks. The “no package loss” and redundant
power feature makes it ideal for security applications.
C1-100 tap is invisible to the network. It is fault tolerant, by-
passes data on power failure, the monitor (TAP) ports are
none-intrusive to the network.
C1P-100

www.profitap.com Page 4
2. Functional description
2.1 Interface connectors
It has 4 RJ45 ports, port A and B are connected to the net-
work, TAP ports A and B are connected to the analyzer.
Network ports A and B are hardware wired together.
2.2 Activity/Link
Two LEDS indicate Activity in 10Mb and Link in 100Mb speed.
Activity LED A lights up when a signal is received at port A,
LED B for a signal received at port B. The brightness of the
Activity LED show signal strength.
2.3 Power
C1-100 tap is redundant powered from the back. Using redun-
dant powering guarantees a maximum uptime off the tap/
monitor ports. Two LEDs show the presence of power.
2.4 Power Failure
Uninterrupted link in the network guarantees permanent
network connectivity, also when power fails. Redundant pow-
ering guarantees maximum uptime of the monitor ports. No
data is passed to the TAP ports at power failure.

www.profitap.com Page 5
3. Installation
a. Power the unit using the 12V PSU, the Power LED lights
b. Connect it into the network using Category 5 UTP cables.
Network Port A : to DCE by straight Cable / to DTE by cross-over cable.
Network Port B : to DTE by straight Cable / to DCE by cross-over cable.
TAP port A and B : to analyzer through straight cables (pins 3/6 active).
The maximum distance between any of the connected devices is 90mtr.
TAP port A mirrors data received in Port A, TAP port B mirrors data
received in Port B.

www.profitap.com Page 6
4. Rack modules.
The C1-100 rack modules are designed to fit, together with
rack mount plates, in 19 inch rack Systems. The C1-100 rack
modules do not include one AC adapter as several units can
be Power chained. The Rack modules plug easily in the rack
mount plates.
Rack mount model
C1R-100
Rack mounted

www.profitap.com Page 7
5. Additional information.
Mechanical Specifications:
Enclosure: Aluminium
Black Front panel
Powered by external adapter: 90-240VAC / 12V-500mA
Power consumption for one unit: 12V-100mA
LEDs: 4x Link/Activity, 2x Network speed , 2x Power
Connectors: 4x RJ45, 8 pin, gold plated
Dimensions:
C1P-100 : 110 x 85 x 30 mm (WxDxH)
C1R-100 :110 x 85 x 35 mm (WxDxH) Front Panel :143x35 mm
Weight : 250 gr
Latency : Less than 1 bit at 100Mbps
Environmental Specifications:
Operating Temperature: 0°C to 50°C
Storage Temperature: -22°C to 70°C
Humidity: 10 to 90%, non-condensing
Certifications: RoHS, CE, FCC class A

Disclaimer
The information in this document is subject to change without notice.
The manufacturer makes no representations or warranties with respect
to the contents hereof and specifically disclaims any implied warranties
of merchantability or fitness for any particular purpose. The manufac-
turer reserves the right to revise this publication and to make changes in
the content hereof without obligation of the manufacturer to notify any
person of such revision or changes.
Warranty and Liability
Comcraft warrants that this product is free from defects in material and
workmanship at time of shipment. The warranty period is 2 years from
the date of purchase. The standard 2 year warranty period may be
extended at the time of order. Comcraft assumes no liability for products
that have been subjected to abuse, modification, misuse, or if the model
or serial number has been altered, tampered with, defaced or removed.
Comcraft is not liable under any contract, negligence, strict liability or
other legal or equitable theory for any loss of use of the product, incon-
venience or damages of any character, whether direct, special, inciden-
tal or consequential (including, but not limited to, damages for loss of
goodwill, loss of revenue or profit, work stoppage or malfunction)
Copyright
This publication, including all photographs and illustrations, is protected
under international copyright laws, with all rights reserved. Neither this
manual, nor any of the material contained herein, may be reproduced
without written consent of the author
Trademarks
The trademarks mentioned in this manual are the sole property of their
owners.
Rev 3.2
COMCRAFT
17A, rue des Frères Lumière
67201 Eckbolsheim
France
[phone]
[phone]
www.profitap.com