Projectiondesign FS35 WQXGA Installation and operating instructions

www.projectiondesign.com
addendum
This addendum contains a decription of the special features
which are different from a standard type projector. Please refer
to the main user guide of the product for important information
about safety precautions and the set-up and use of the projec-
tor. Make sure to read both the standard user guide and this
addendum carefully before you operate the projector.
Dieser Anhang enthält eine Beschreibung der besonderen
Merkmale, die sich von denen eines normalen Projektors
unterscheiden. Für wichtige Informationen in Bezug auf die
Sicherheitsvorkehrungen und den Aufbau und die Benutzung
des Projektors schauen Sie bitte in die Gebrauchsanweisung
für das Produkt. Lesen Sie bitte die Gebrauchsanweisung und
diesen Anhang aufmerksam durch, bevor Sie den Projektor in
Benutzung nehmen.
Le présent addenda présente les caractéristiques particu-
lières qui diffèrent de celles d’un projecteur de série. Pour les
consignes de sécurité importantes et les indications concernant
la configuration et le maniement de l’appareil, reportez-vous
au guide d’utilisation principal. Lisez soigneusement le guide
standard ainsi que cet addenda avant de mette le projecteur
en service.
Esta adenda contiene una descripción de las funciones
especiales que se diferencian de las de un proyector de tipo
estándar. Por favor, remitirse a la guía del usuario principal del
producto, para información importante sobre las precauciones
de seguridad y la configuración y el uso del proyector. Procurar
leer detenidamente tanto la guía del usuario estándar como
esta adenda antes de poner en marcha el proyector.
Il presente allegato illustra le caratteristiche speciali differenti
rispetto a un proiettore standard. Fare riferimento alla Guida
dell’utente principale del prodotto per informazioni importanti
sulle precauzioni di sicurezza, la configurazione e l’uso del proi-
ettore. Leggere attentamente sia la Guida dell’utente standard
che questo allegato prima di utilizzare il proiettore.
Dette addendumet inneholder en beskrivelse av de egenskap-
ene som avviker fra en standard projektor. Sjekk med produktes
komplette brukerveiledning for viktig informasjon om sikkerhet-
stiltak, oppsett og bruk av projektoren. Les både den komplette
brukerveiledningen og addendumet nøye før projektoren tas i
bruk.
IR PROJECTORS
projectiondesign as FS35 WQXGA

INTRODUCTION
The FS35 WQXGA is a state of the art NVG (Night Vision Goggle) stimulation LED projec-
tor which include a fourth LED light chip that emits infrared light beyond the range visible to
the human eye. The product is capable of visualizing night-time and limited-visibility scenario
simulation as well as visible day-time or pitch black scenarios from the common display en-
gine in order to have a true-to-life simulation.
The FS35 WQXGA is single channel input and handles the content through one of the input
connectors (HDMI/DVI/VGA). The infrared wavelength is optimized for the performance of the
optics in the projector and the night vision goggles present in the market today. The projec-
tor’s solid-state light source provides a completely constant light output over time, eliminating
the need for recalibration, reducing maintenance and total cost of ownership to a minimum.
FEATURES
• NVG stimulation by a fourth Infrared LED
• 2560 x1600 resolution
• Dimmable to extreme low lumens output of the visible RGB display
• Project visible display for daytime images
• Project infrared display only, no visible image to the unaided human eye
• Simultaneous project visible and infrared for limited visibility scenario
• Smear reduction sequence
• Infrared power adjustments
MENUS
BrilliantColorTM sequences:
There are 5 sequences to choose in the REALCOLOR menu. These displays differently when
it comes to sequence modes for color points versus lumens output.
• Vizsim
• Graphics
• HighBrightness
• SRPTM 6ms (smear reduction)
• SRPTM 8ms (smear reduction)
IR menu:
A separate IR menu which works with each BrilliantColorTM sequence listed above,
controls the infrared and visual RGB performance.
Full spectrum: Turns infrared LED on/off.

IR LED power: Adjusts the intensity of infrared LED.
RGB LEDs: Turns visible RGB LED’s on/off.
Dim mode standard: Dimming options from full to minimum with color processing turned
on so the white point is kept constant throughout the range. Appropriate use for daytime and
evening scenarios.
Dim mode custom: Dimming scheme for limited visibility scenarios, enabling the user to
separately adjust the values of the R, G and B intensity in order to tune in the low light visibility
matching the projected content.

PRODUCT USE
For basic operations, set-up and safety precautions, please refer to the main user
guide included with the product.
The FS35 is capable of displaying both daytime images, as well as night vision stimulated
content using the fourth infrared chip in the display engine. By operating and adjusting the
dedicated IR Menu options described in the MENU section, the projector is able to display the
full spectrum of the simulation scenarios (see examples below).
• Daytime scenario: Bright scenarios with high lumens output with crisp colors showing all
details. Typically full power to the RGB LED’s and no power to the fourth infrared LED.
• Evening scenario: Low illuminated scenarios at evening/dusk where the picture is dimmed
by adjusting the RGB LED’s. Fewer details are visible to the unaided human eye
compared to daytime scenarios.
• Limited visibility scenario: Night time image, where the visible RGB LED is dimmed to very
low lumens output by using the custom IR menu. Details are barely seen with the human eye.
Using the infrared LED and NV goggles in addition gives full spectrum NV simulation modus.
For pitch black scenarios the visible RGB LED’s are turned off, only keeping the infrared LED
showing the content.
If you start in infrared only mode and do not have your NV-goggles available in terms
of being able to see and navigate the menus: Press 4 times on the LIGHT button on the
keypad and the visible RGB field turns on.

COMPATIBILITY
Examples of supported Night Vision-goggles:
(not a complete list, a selection of the most common in the market today)
• Gen 1
• Gen 2
• Gen 2+ Russian
• Gen 2+
• Gen 2 SuperGen
• Gen 2 XD-4
• Gen 2 XD-4 ONYX
• Gen 2 XD-4AG
• Gen 2 XD4AG ONYX
• Gen 2 XR5
• Gen 2 XR5 ONYX
• Gen 2 XR5AG
• Gen 2 XR5AG ONYX
• Gen 3 Commercial
• Gen 3 Premium
• Gen 3 Pinnacle
• Gen 4
• Gen 4 Gated/ IIT

©2010. All brands and trade names are the property of their respective owners. Specifications subject to change without prior notice. All values are
typical and may vary. Please visit our website for latest specifications and product offerings.
601-0242-01
All brands and trade names are the property of their respective owners. Specifications subject to change without prior notice.
All values are typical and may vary. Please visit our website for latest specifications and product updates.
©2010 projectiondesign AS. All rights reserved. All brands and trade names are the property of their respective owners. Specifications subject to
change without prior notice. All values are typical and may vary. Please visit our website for latest specifications and product offerings.
www.projectiondesign.com
601-0289-00