Projectiondesign F3 xga Manual

Product: Document: Project:
F3 F3 IR remote codes -
Revisions
Prepared: Verified: Approved: Change:
Sigmund Jensen
Table of Contents
Revisions .............................................................................................................................1
Table of Contents ................................................................................................................1
Scope ...................................................................................................................................1
General ................................................................................................................................1
Scope
General
Remote keycode map, NEC protocol
Modulated at 38kHz
NEC custom-code: 20DF
NEC code Function Description
00 Power Toggle power. Confirm
power off.
01 Auto
02 Info Pop up info screen.
03 Zoom +
04 Focus +
05 Iris +
06 Shutter toggle
07 Zoom -
08 Focus -
09 Iris -
0A Select shift
0B X-Port 1
0C VGA Select VGA input
0D DVI Select DVI input
0E S-video Select S-video
0F X-Port 2
10 BNC Select BNC input
11 YPbPr Select YPbPr input
12 Video Select composite video
13 Aspect Toggle through various
© projectiondesign as 2002. All rights reserved.
Created: CONFIDENTIAL Revision:
- Page 1 of 3 -

Product: Document: Project:
F3 F3 IR remote codes -
aspect ratio scaling formats
14 Menu Activate main menu.
15 Brightness Select brightness
16 Contrast Select contrast
17 Gamma - Select lower contrast
gamma. Do not wrap.
18 Gamma + Select higher contrast
gamma. Do not wrap.
19 * Chameleon button
1A 1 Number 1
1B 2 Number 2
1C 3 Number 3
1D 4 Number 4
1E 5 Number 5
1F 6 Number 6
20 7 Number 7.
21 8 Number 8
22 9 Number 9
23 Store Used in conjunction with a
number to store various
settings.
24 0 Number 0
25 Recall Used in conjunction with a
number to recall various
settings.
26 Arrow up
27 Arrow left
28 Arrow enter/ok
29 Arrow right
2A Arrow down
Extra codes
These codes are not implemented on the remote control, but may be used with external
control systems like AMX, Crestron or similar.
NEC-code Function Description
80 Power on Turn on projector
81 Power off Turn off projector. Does not
require confirmation.
90 A/V Mute on Hides image. Screen goes to
black.
91 A/V Mute off Enables the image.
92 Fill Aspect Ratio Scaler mode
93 Fill 16:9 --
94 Letterbox to 16:9 --
95 Letterbox st to 16:9 --
96 Zoom --
© projectiondesign as 2002. All rights reserved.
Created: CONFIDENTIAL Revision:
- Page 2 of 3 -

Product: Document: Project:
F3 F3 IR remote codes -
© projectiondesign as 2002. All rights reserved.
Created: CONFIDENTIAL Revision:
- Page 3 of 3 -
97 Anamorphic --
98 1:1 --
99 Fill All --
Video Sources
9A Gamma Film1 Gamma mode for video
sources
9B Gamma Film2 --
9C Gamma Video1 --
9D Gamma Video2 --
9E Gamma Computer1 --
Gamma Computer2 --
9F Computer Sources
A0 Gamma Film1 Gamma mode for computer
sources
A1 Gamma Film2 --
A2 Gamma Video1 --
A3 Gamma Video2 --
A4 Gamma Computer1 --
A5 Gamma Computer2 --