Prorack K175 User manual

K175
Fitting Kit
EN Fitting Instructions for Basic Carrier
x 2 x 2 x 2 x 2
Revision No: 4C 1

Fitting Kit K175
MAX kgs (lbs)
W/P WHD
Ford
Fiesta , 5dr Hatch 02-08 EU 75 kgs (165 lbs) 75 kgs (165 lbs)
Fiesta , 5dr Hatch 02-08 EU 75 kgs (165 lbs) 75 kgs (165 lbs)
Fiesta , 5dr Hatch Apr 04-Mar 09 NZ 75 kgs (165 lbs) 75 kgs (165 lbs)
Fiesta , 5dr Hatch Apr 04-Mar 09 NZ 75 kgs (165 lbs) 75 kgs (165 lbs)
Fiesta , 5dr Hatch Apr 04-Mar 09 AU 75 kgs (165 lbs) 75 kgs (165 lbs)
Fiesta , 5dr Hatch Apr 04-Mar 09 AU 75 kgs (165 lbs) 75 kgs (165 lbs)
2

Fitting Kit EN
K175
First Time Installation
●Remove parts from inside the package and
check. Contact your dealer if any parts are
missing or damaged.
●This kit fits type A, B, C and D.
●These instructions show type A crossbar
fitted. They also apply to type B, C and D.
NOTE: Clamp images in these instructions may
not be representative of the clamps in this kit
3

Fitting Kit EN
K175
●Use keys to remove covers.
●Use hex screwdriver to reverse adjusting
screw 10 turns.
●Press adjusting screw and pull crossbar
legs out. Refer to the crossbar instructions
for crossbar adjustment.
●Ensure each end of the crossbar is
adjusted equally.
4

Fitting Kit EN
K175
●Remove locking screw.
●Apply protective strip as shown.
Trim if required.
●Letters refer to the part numbers stamped
on clamps.
●Clamp Part Number:
A = 218B
B = 360A
5