Protocol HEAVY-DUTY ALL-IN-ONE BOXING SET User manual

ALL-IN-ONE
BOXING SET
HEAVY-DUTY
Instruction Manual
Read through this entire instruction manual BEFORE using
Heavy-Duty All-in-one Boxing Set. We’re dedicated to bringing
you well-designed products that make living fun and easy. We
stand behind all our products and warrant this to be free from
defects in workmanship and materials.
For service claims or questions please consult our website
ProtocolDesign.com.
WARNINGS:
- Make sure the set is fully secure before hitting the ball.
- Only use the set in areas that are clear of obstacles, objects,
and other people. Do not use near anything valuable in case
the ball or set comes loose.
- Be aware that any exercise involving physical contact may
result in injury.
TM
COVER
BACK

INSTALLATION:
1. Assemble the base as shown in the diagram.
2. Assemble the set as shown in
the diagram to the right.
* Slide the foam cover on the tube
first and push down past the
holes. Place the punching ball
onto tube and screw in place.
Slide the foam cover back up
over the screws.
3. Remove caps and fill the base with
sand or water. Replace the caps.
Adjusts
height
Foam
cover