Proxim QuickBridge II User manual

Voice and Data Connectivity Made Simple
Proxim’s Tsunami QuickBridge II is a complete, user-installable wireless point-to-point bridging
solution designed for reliable long distance and low latency voice and data connectivity. This
high-performance hop-in-a-box is available with 34 Mbps and two integrated T1/E1 voice
channels or with 54 Mbps aggregate throughput. Highly affordable and exceptionally easy to
install, Tsunami QuickBridge II eliminates the deployment challenges and recurring fees
associated with standard T1, E1, or DS-3 installations. As a replacement for a DS-3 leased line,
Tsunami QuickBridge II pays for itself in less than two months.
• Co-location of multiple QuickBridge II radios increase capacity, extend range and provide
network redundancy between locations
• Available with two integrated T1/E1 voice channels for low-cost voice transmission1
• Built-in SNMP support and QuickBridge Manager software allow flexible management of
local and remote radios
Designed for Complete Ease of Use
Tsunami QuickBridge II is the easiest-to-install family of broadband wireless bridges on the
market. Requiring no training or wireless experience, they can be set up and installed within
hours. Each solution includes everything you need to set up a link right out of the box.
• Hop-in-a-box solution includes two radios with integrated antennas, cables, mounting
hardware, power supply and documentation
• Easy to use software enables fast configuration
• Audible tones ensure antennas are properly aligned
Cost-effective Connectivity
The Tsunami QuickBridge II family offers the best price-performance for campus networking
and backhaul applications. Supporting voice and data transmission, they can easily replace
T1/E1 or DS-3 connections with a payback of less than one year.
• Capacity from 6 to 54 Mbps supports enterprise and service provider bandwidth-intensive
applications
• Connectivity for buildings located up to 6 miles away
• Synchronous voice channels available for low cost PBX extensions
Flexibly Manage Your Entire QuickBridge Network
Designed for outdoor networks, Tsunami QuickBridge management tools enable network
managers to view and proactively maintain all radios located throughout multiple facilities. In
contrast to leasing lines, network ownership gives managers complete visibility into local and
remote bridges.
• Built-in SNMP support and web-based QuickBridge Manager simplify remote java-based
management and integrate easily into existing network policies
• Proactive alarm notifications enable network managers to maximize network performance
Secure & Reliable
A wireless alternative to a wired network provides greater control over network quality. Backed
by more than 20 years of wireless design innovation, Proxim's Tsunami QuickBridge solutions
offer the highest security and reliability available in networking today.
• Up to 99.995% RF link availability
• Meets or exceeds wired network security
• Proprietary Link ID provides secure wireless transmission
High-Capacity Wireless Backhaul
Proxim Wireless offers extremely reliable,
secure and easily-deployed solutions for
interconnecting corporate and
telecommunications networks.
This portfolio includes:
• GigaLink®– Alternative to fiber, up to a
Gigabit speed
• Lynx.GX®– Cellular voice and data
backhaul, up to DS3 interface
• Tsunami.GX®- Carrier-class IP
Ethernet bridge for voice and data
backhaul for service providers and
enterprise applications
• TeraBridge™– Ethernet backhaul or
traditional telecommunications converged
voice and data networks
• QuickBridge®– Complete “hop-in-a-
box” Ethernet bridge for campus and
small business networks
Proxim Wireless is a global provider in scalable
broadband wireless networking. From Wi-Fi to
wireless Gigabit Ethernet – our WLAN, mesh,
point-to-multipoint and point-to-point products
are available through our extensive global
channel network.
Tsunami®QuickBridge II
Point-to-Point Wireless Outdoor Bridge
QuickBridge II Point-to-Point Bridge
1T1/E1 interfaces available on on QuickBridge II 40 + 2xT1/E1 model only.

Tsunami ®QuickBridge II
Technical Specifications
Proxim Wireless Corporation
www.proxim.com
For detailed technical specifications, please go to http://www.proxim.com/products/bwa/point/
©2006 Proxim Wireless Corporation. All rights reserved. Proxim is a registered trademark and the Proxim logo and Tsunami are trademarks of Proxim Wireless Corporation.
All other trademarks mentioned herein are property of their respective owners. Specifications are subject to change without notice.
DS_0806_QBII_US
APPLICATIONS
• Enterprise LAN and PBX extension
• Redundant links between locations
• Voice and data backhaul from
remote POPs
• Dedicated ISP connections for
high-capacity subscribers
• Connectivity for long distances
• Affordable alternative
to wired networks
3A 5,740.401 MHz 4A 5,743.85 MHz
3B 5,774.984 MHz 4B 5,764.60 MHz
3C 5,809.568 MHz 4C 5,785.35 MHz
4D 5,806.10 MHz
RADIO CHARACTERISTICS
FREQUENCY PLAN
FREQUENCY BAND
QUICKBRIDGE II 60
QUICKBRIDGE II 40
+ 2XT1/E1
TRANSMIT POWER
ANTENNA
MAXIMUM RECEIVE LEVEL
LATENCY
ACCESS METHOD
MODULATION TECHNIQUE
SECURITY KEY
COMPLIANCE
DATA INTERFACE
ETHERNET INTERFACE
CONNECTOR
CABLE TYPE
QBII 40 2XT1/E1
CONNECTOR
COMPLIANCE
MANAGEMENT
LOCAL, REMOTE ACCESS
SOFTWARE UPGRADE
SECURITY
ELECTRICAL SPECS
AC POWER
DC POWER (TO UNIT)
POWER CONNECTOR
ENVIRONMENTAL SPECS
TEMPERATURE
OPERATING
STORAGE
HUMIDITY
ALTITUDE
WIND LOADING
PHYSICAL SPECS
DIMENSIONS
WEIGHT
PACKAGE CONTENTS
ADDT’L ACCESSORIES
65157
66988
66992
62059
58521
CHANNEL PLAN FREQUENCY CHANNEL PLAN FREQUENCY
(WAYSIDE
INTERFACE)
PRODUCT MODELS
64678
64679
Tsunami QuickBridge II 60 Link
Tsunami QuickBridge II 40 2xT1/E1 Link
226 Mbps with both waysides enabled.
5.725 - 5.825 GHz
54 Mbps 7 -77 dBm +36 dBm 133 dB Up to 3 miles/5 km
34 Mbps 7 -81 dBm +36 dBm 137 dB Up to 4 miles/6 km
18 Mbps 7 -89 dBm +36 dBm 145 dB Up to 6 miles/10 km
34 Mbps27 -81 dBm +36 dBm 137 dB Up to 4 miles/6 km
Output: +16 dBm max; +15 dBm typical
Integrated LHCP; 20 dBi, 10° azimuth by 10° elevation
-20 dBm error free
2.5 msec typical, 5 msec maximum
Time Division Duplex
QPSK with equalization and FEC
16 Character Security ID (Alphanumeric); authentication and PN transmission; scrambling
US: FCC Part 15.247 ISM; Canada: IC RSS 210; Model 40100-25
10/100BaseT via AC power adapter
RJ-45 female modular plug with weather-protected shell
CAT5
T1 E1
RJ-48C female modular jack Balanced RJ-48C female module jack
ANSI T1.403 G.703
QuickBridge Manager (Java-based GUI) for discovery, status, and configuration; SNMPv2 embedded in radio
with Enterprise MIB II
Over-the-air reprogramming
2-level password access on Manager
Adapter included, 100 VAC or 220 VAC, 450mA; Output: 28V DC, 0.6 A
+18 to +28 VDC
Power over Ethernet CAT5 cable RJ-45
-25° to 55° C
-55° to 85° C
5 to 100% condensing
Up to 15,000 ft
115 mph
PACKAGED UNPACKAGED (per radio unit)
19.6 x 14.6 x 14.25 in (497.8 x 370.8 x 361.9 mm) 10.5 X 10.5 X 4.5 in (265 X 265 X 113 mm)
28.4 lbs (12.9 kg) 10 lbs (4.5 kg)
•QuickBridge Radio Units (Qty 2)
•Mounting hardware (Qty 2)
•Power adapters (Qty 2)
•50 meter Cat5 cable (Qty 2)
•CD-ROM with user documentation and QuickBridge Manager software (Qty 1)
Tsunami QuickBridge II GPS Antenna Kit
Tsunami QuickBridge II T1/E1 Cable Kit, 2 x 50 meter Cables
Tsunami QuickBridge II Cable Termination Kit - contains connectors needed to build two data or T1/E1 cables
Power Supply 110/220 VAC, Switching 28V @ 1A
Outdoor Wall Mounting Kit
AGGREGATE CHANNEL THRESHOLD EIRP OUTPUT SYSTEM GAIN DISTANCE
THROUGHPUT PLANS (BER=1X10-6) POWER (INCLUDING ANTENNA) (MILES/KM)