PROZIS RAY User manual

EN
1
User Manual
Warranty statement
V.1 07/2020

2
1
2
3 4 5 6 7
8

3
Language index
EN 4
FR 15
DE 27
IT 40
ES 51
PT 62

EN
4
Prozis is a registered trademark of PROZIS.COM, S.A.
Prozis reserves the right to adjust or modify the product or any of the associated documenta-
tion in order to ensure its suitability for use, at any time and without prior notice.
Legal compliance statement
By means of this document, PROZIS declares that the Prozis Ray LED Table Lamp +
Wireless Charger is fully compliant with all the standards specied in the applicable
legislation as well as other relevant clauses.
Prozis will always be available for any additional clarication through our customer support
communication channels, available at www.prozis.com/support
To avoid any impact on the environment or on human health due to dangerous
substances present in electrical and electronic devices, the end users of such devices
are expected to understand the meaning of the symbol consisting of a crossed-out
waste container. Do not dispose of waste electrical and electronic equipment along
with unsorted household waste. Dispose of it separately and properly instead.
The packaging that protects the device against transport damage is made from
non-polluting materials that can be disposed of via local recycle bins.
The most recent version of this user manual can be found at www.prozis.com/user-manuals
Safety warnings
DANGER! This symbol, when com-
bined with the note Danger, means
high risk. Failure to observe this
warning may lead to injury to life and
limb.

EN
5
DANGER FOR CHILDREN AND
PEOPLE WITH DISABILITIES
• Packing materials are not toys.
Children must not play with the
packing materials. There is a suffo-
cation risk.
• This device can be used by chil-
dren aged 8 years and up and
people with limited physical, sen-
sory or mental capabilities, or
without adequate experience and/
or knowledge, provided that they
are under supervision or have
been instructed on how to use the
device safely, and understand the
risks involved.
• Children must not play with the
device. Cleaning and maintenance
must not be performed by children
without supervision.
• Keep the device out of the reach
of children.

EN
6
DANGER! RISK OF FATALITY
FROM ELECTRIC SHOCK
FOR INDOOR USE ONLY.
• Check the lamp for any possible
damage before every use. Never
use the lamp if it shows any signs
of damage. A damaged light can
lead to death by electric shock.
Regularly check the cord, the
adapter and all other parts for
damage. If any part is damaged,
the device should not be used.
• In case of damage, repairs or oth-
er problems with the lamp, please
contact Prozis customer service.
To avoid hazards, always make sure
that damaged cords are replaced by
the manufacturer, their service repre-
sentative, or an equivalent profession-
al.

EN
7
The light source in this lamp is not
replaceable; when the light source
reaches the end of its lifecycle, the
whole lamp needs to be replaced.
The external cable of this lamp’s
adapter cannot be replaced. If the
cord is damaged, the adapter needs
to be disposed of.
• Only use the lamp with the includ-
ed adapter.
• Before use, ensure that the avail-
able mains voltage matches the
voltage required for the lamp to
function.
• Make sure to keep the lamp away
from water or other liquids under
any circumstances. Always make
sure the lamp is disconnected
from the adapter prior to assem-
bly, disassembly or cleaning, or
whenever the light will not be
used for longer periods of time.

EN
8
• Never open or insert objects into
any of the components of the elec-
trical equipment. Such an action
will pose a risk of fatal injury from
electric shock.
CAUTION! This symbol highlights
dangerous situations which may lead
to minor to moderate injuries, dam-
age, malfunction, and/or destruction
of the device.
To prevent harm or damage from hap-
pening to users or others, make sure
to comply with the following require-
ments.
• Never look directly into the light
source.
• To prevent burns, make sure
the light is switched off and has
cooled down before touching it.
• Lamps can become very hot. Do
not cover the light or the adapter

EN
9
plug with objects. Excessive heat
may result in fire.
• Do not leave the lamp unattended
while switched on.
• Place the lamp in such a manner
that it is protected from moisture
and dirt.
• Whenever changing the position
of the pole or head becomes dif-
ficult, this may be because the
joints are unable to move further
in the desired direction. In such a
case, do not try to force the joints
to move beyond their capacity,
otherwise you risk damaging the
lamp.
• If any joint in the lamp pole or
lamp head comes loose, tighten
the nut at the joint accordingly. A
coin can be used to this effect.

EN
10
User manual
PACKAGE CONTENTS
• 1 × Prozis Ray LED Table Lamp + Wireless Charger
• 1 × Adapter
• 1 × Quick Guide
PRODUCT OVERVIEW (SEE PAGE 2)
1. DC Plug
2. AC Plug
3. Change light color
4. Increase light brightness
5. ON/OFF
6. Decrease light brightness
7. Timer
8. Wireless charging area
INSTRUCTIONS
Installing the light
1 2
Place the lamp with its base on a at surface and its rear facing you.
Insert the DC Plug of the power adapter into the connection socket on the back of the lamp.
Then plug the AC Plug into a properly installed electrical socket.
Switching the lamp on and off
Switch the lamp on or off by pressing the On/Off button on
the lamp base.

EN
11
Qi charging
Your Qi-compatible phone can be charged by placing it on
the Wireless Charging Area on the lamp base. To charge
wirelessly, place your device on top of the charging icon at
the center of the base. The device must be placed directly
over the icon for the charging function to work optimally.
Note that it may be necessary to activate wireless charging in
your device settings.
Changing LED light color
Short-press the Change light color button to switch
between natural, white and yellow light.
Increasing/decreasing light brightness
With the lamp on, short-press the Increase light brightness
or Decrease light brightness button to change the light
brightness.
Using the timer
With the light on, long-press the Timer button to turn on the timer function. The light will ash
twice as a conrmation. When the timer is enabled, the lamp will turn itself off automatically
after 40 minutes. Long-pressing the Timer button again will reset the timer.
Notes
• If your battery is completely discharged, it may take a few minutes before it starts charging.
This is perfectly normal. When charging begins, your phone will display the battery symbol.
• Devices may get warm during charging. This is completely normal, and they will gradually
cool down again as soon as they are fully charged.
• Charging time may vary based on the device’s battery capacity, charge level, battery age,
and the temperature in the surrounding area.

EN
12
Maintenance and cleaning
Always make sure the device is completely switched off and disconnected before cleaning.
For your safety, never clean the lamp with water or other liquids, or immerse it in water.
Do not use abrasive, acid or solvent cleaning agents to clean the device, to avoid damaging
it. Only clean the outside of the device. using a soft, dry cloth.
Always make sure to keep the lamp away from moisture, especially during cleaning, in order
to prevent product damage and related repairs.
Storage
When not using the lamp for a longer time, store it in a dry place, away from dust and direct
sunlight. It is recommended to store the lamp in its original packaging.
Troubleshooting
Some issues that arise may be solved by the user. If the problem persists after having tried
the following solutions, please contact Prozis customer service.
PROBLEM CAUSE SOLUTION
The lamp is not working. The adapter is not properly
connected to the lamp and/
or power supply.
Make sure the adapter is
connected properly.
Qi wireless charging does
not work.
The device you are trying to
charge is not Qi-compatible
Check with your phone man-
ufacturer for compatibility.
Warranty statement
All electrical and electronic products commercialized by Prozis via www.prozis.com are cov-
ered by the warranty applicable to the purchase and sale of consumer goods.
GENERAL CONSIDERATIONS
This document contains the terms and conditions of Prozis’ warranty for nal consumers.
This warranty is valid exclusively for consumers who purchase the product for non-profession-
al purposes.

EN
13
WARRANTY PERIOD
Prozis guarantees the product is to remain free from material and production defects for a
2-year period, counting from the date of initial purchase by a consumer and respective deliv-
ery, or for longer if legally established by the applicable national law.
In the event that repair is required, this 2-year period is suspended during repair time.
CONSUMABLES
The gradual performance decrease caused by prolonged use of the product’s consumable
components, such as batteries, is not covered by this warranty unless the malfunction is
caused by faulty design, materials or production.
HOW TO MAKE A CLAIM
If the need arises to exercise the rights conceded to you through this warranty, please contact
Prozis customer service via the communication channels provided on the Prozis website,
and follow the provided instructions or recommendations. Contact and technical assistance
information is also provided at the end of this warranty.
Any claims made regarding this warranty will only be valid if proof of purchase is presented
by the original customer. This proof of purchase may be the original invoice or receipt, as
long as it includes information regarding the date of purchase and the product’s model
name.
WARRANTY REPAIRS
Any repairs made under this warranty cannot be made by third parties. This warranty does
not apply to any repairs, or damage caused directly by such repairs, that have impacted or
caused the damage that is the subject of the respective warranty claim.
EXCLUSIONS
The following situations are not covered by this warranty:
1. Any wear and tear of parts and components resulting from normal product use.
2. Cracks, dents, scratches, and other types of supercial damage that only affect the prod-
uct’s appearance.
3. Any malfunction caused by inappropriate use of the product that does not comply with
user manual instructions.
4. Use and storage of the product not complying with user manual instructions.
5. Opening of the product by a third party who is not authorized to proceed to its repair.
6. Altering or changing parts or components, whether internal or external.
7. Damage caused by battery leakage resulting from the breaking of any of its components,
or from product misuse.
8. Malfunction or damage due to reasons that cannot be ascribed to the production or
design of the product.
9. Use of the product in the context of a business, occupation or commerce.
10.Malfunction due to use that does not comply with the technical or security norms in force,
or with user manual instructions.

EN
14
The services provided by Prozis in order to repair or x any fault or malfunction resulting from
the verication of any of the aforementioned excluded situations will be subject to payment
of labor, transport and component costs.
The customer shall bear all risks of loss and damage to the product during transportation
to Prozis. This warranty will be void if the returned product arrives with labels or stickers that
have been removed, damaged, tampered with or modied in any way.
LIMITED RESPONSIBILITY
Prozis cannot be held responsible for indirect damage or loss due to usage of the product.
WHAT TO DO?
To request warranty service, you must rst contact Prozis customer service via the commu-
nication channels provided on the Prozis website, and follow the provided instructions and
recommendations.
Send back the product inside its original packaging, including all accessories and documen-
tation, to the following address:
PROZIS
Rua do Cais nº 198
4830-345 Póvoa de Lanhoso
Braga - Portugal
CONTACTS
Prozis is always available for additional clarication through their customer service communi-
cation channel at www.prozis.com/support.

15
Prozis est une marque déposée de PROZIS.COM, S.A.
Prozis se réserve le droit, à tout moment et sans préavis, d’ajuster ou de modier le produit
ou toute documentation associée an de s’assurer de l’adéquation pour l’utilisation prévue.
Déclaration de conformité légale
Par le présent document, PROZIS déclare que la Lampe de table LED + Chargeur
sans l Ray de Prozis est entièrement conforme à toutes les normes spéciées dans la
législation applicable ainsi qu’aux autres clauses pertinentes.
Prozis sera toujours disponible pour toute explication supplémentaire par le biais des canaux
de communication du service client, disponibles sur www.prozis.com/support.
An d’éviter tout impact sur l’environnement ou la santé humaine en raison des
substances dangereuses présentes dans les appareils électriques et électroniques,
les utilisateurs naux doivent comprendre la signication du symbole représentant
une poubelle barrée. Ne jetez pas les appareils électriques et électroniques dans les
ordures ménagères non triées, mais plutôt séparément et de façon convenable.
L’emballage qui protège l’appareil contre les dommages dus au transport est
constitué de matériaux non polluants qui peuvent être déposés dans des conteneurs
de recyclage locaux.
La dernière version du manuel d’utilisation de ce produit est disponible sur www.prozis.com.
Avertissements de sécurité
DANGER ! Ce symbole, combiné à la
mention Danger, indique un risque
élevé. Le non-respect de cet avertis-
sement peut entraîner des blessures
à un membre et un risque de décès.
FR

16
FR
DANGER POUR LES ENFANTS
ET LES PERSONNES HANDICA-
PÉES
• Les matériaux d’emballage ne
sont pas des jouets. Les enfants ne
doivent pas jouer avec le matériel
d’emballage. Il existe un risque de
suffocation.
• Cet appareil peut être utilisé par
des enfants de 8 ans et plus et par
des personnes aux capacités phy-
siques, sensorielles ou mentales
limitées, ou sans expérience et/ou
connaissances adéquates, à condi-
tion qu’elles soient sous surveil-
lance ou qu’elles aient reçu des
instructions sur la manière d’utili-
ser l’appareil en toute sécurité, et
qu’elles comprennent les risques
encourus.
• Les enfants ne doivent pas jouer
avec l’appareil. Le nettoyage et

17
FR
l’entretien ne doivent pas être ef-
fectués par des enfants sans sur-
veillance.
• Gardez l’appareil hors de portée
des enfants.
DANGER ! RISQUE DE DÉCÈS
PAR ÉLECTROCUTION
POUR UN USAGE INTÉRIEUR
UNIQUEMENT.
• Avant chaque utilisation, vérifiez
que la lampe n’est pas endomma-
gée. N’utilisez jamais la lampe si
elle présente des signes de dom-
mages. Une lampe endommagée
peut entraîner un décès par élec-
trocution. Vérifiez régulièrement
que le cordon, l’adaptateur et
toutes les autres pièces ne sont
pas endommagés. Si l’une des
pièces est endommagée, l’appareil
ne doit pas être utilisé.

18
FR
• En cas de dommage, de besoin de
réparation ou d’autres problèmes
avec la lampe, veuillez contacter le
service client de Prozis.
Pour éviter tout risque, veillez tou-
jours à ce que les cordons endomma-
gés soient remplacés par le fabricant,
son représentant ou un professionnel
équivalent.
La source lumineuse de cette lampe
n’est pas remplaçable. Lorsque la
source lumineuse atteint la n de son
cycle de vie, la lampe entière doit être
remplacée.
Le câble externe de l’adaptateur de
cette lampe ne peut pas être rem-
placé. Si le cordon est endommagé,
l’adaptateur devra être jeté.
• Utilisez la lampe uniquement avec
l’adaptateur fourni.

19
FR
• Avant l’utilisation, assurez-vous
que la tension secteur disponible
correspond à la tension nécessaire
au fonctionnement de la lampe.
• Veillez toujours à tenir la lampe
à l’écart de l’eau ou d’autres li-
quides. Assurez-vous toujours
que la lampe est débranchée de
l’adaptateur avant de la monter, de
la démonter ou de la nettoyer, ou
lorsque la lampe ne sera pas utili-
sée pendant une longue période.
• N’ouvrez ou n’insérez jamais d’ob-
jets dans les composants de cet
équipement électrique. Une telle
action présente un risque de bles-
sure mortelle par électrocution.

20
FR
ATTENTION ! Ce symbole indique
les situations dangereuses qui
peuvent entraîner des blessures lé-
gères à modérées, des dommages,
un dysfonctionnement et/ou la des-
truction de l’appareil.
Pour éviter que des dommages ou des
dégâts n’arrivent aux utilisateurs ou à
d’autres personnes, veillez à respecter
les exigences suivantes.
• Ne regardez jamais directement
vers la source de lumière.
• Pour éviter les brûlures, assu-
rez-vous que la lumière est éteinte
et qu’elle a refroidi avant de la
toucher.
• Les lampes peuvent devenir très
chaudes. Ne couvrez pas la lampe
ou la prise de l’adaptateur avec
des objets. Une chaleur excessive
peut provoquer un incendie.