PTZOptics PT-STUDIOPRO User manual

User Manual
Model No. PT-STUDIOPRO
V1.0
(English)
Please check ptzoptics.com for the most up to date version of this document.
v1_1 rev 11-22
Studio Pro
Live Streaming and Video Conferencing Camera

2
v1_1 rev 11-22
Table of Contents
Preface .......................................................... 3
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Warning ......................................................... 3
Warranty ......................................................... 4
Supplied Accessories ............................................... 4
FCC Statement .............................................. 4
NDI®|HX Connection................................................ 5
Connection GuideConnection Guide .................................................................................................... 66
Dimensional Drawings............................................... 7
Features ......................................................... 8
IR Remote Controller Guide .......................................... 11
On Screen Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
On Screen Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Network Connection ................................................ 29
Discovering your Network Info .................................. 30
Web UI........................................................... 32
Maintenance and Troubleshooting ..................................... 53
Camera Maintenance .......................................... 53
Unqualied Applications ....................................... 53
Troubleshooting .............................................. 53
Control ..................................................... 54

3
v1_1 rev 11-22
Preface
Congratulations on receiving your new PTZOptics Studio Pro live streaming and video
conferencing camera.This manual introduces the function, installation, and operation of the HD cam-
era. Prior to installation and usage, please read the manual thoroughly. Please contact our Support
team if you have any questions or issues with this process.
Precautions
This product can only be used in the specied conditions in order to avoid any damage to the unit
itself.
• Don’t subject the camera to rain or moisture.
• Don’t remove the cover. Removal of the cover may result in an electric shock. In addition to
• Never operate outside of the specied operating temperature range, humidity, or with any
other power supply than the one originally provided with the unit.
• Please use a soft dry cloth to clean the unit. If the unit is very dirty, clean it with diluted neu-
tral detergent; do not use any type of solvents, which may damage the surface.
Warning
• Electrical Safety
Installation and operation must be in accordance with national and local electric safety
standards. Do not use any power supply other than the one originally supplied with this
camera.
• Polarity of Power Supply
The power supply output for this product is 12V DC with a maximum current supply of
2A. Polarity of the power supply plug is critical and is as follows:
• Handling
ŜAvoid any stress, vibration, or moisture during transportation, storage, installation,
and operation.
ŜDo not expose the camera to any corrosive solid, liquid, or gas to avoid damage to
the cover which is made of a plastic material.
ŜNever power the camera on before installation is complete.
• Do not dismantle the camera – PTZOptics is not responsible for any unauthorized
modication or dismantling.

4
v1_1 rev 11-22
Warranty
PTZOptics includes a limited parts & labor warranty for all PTZOptics manufactured cameras. The warranty is
valid only if PTZOptics receives proper notice of such defects during the warranty period. PTZOptics, at its
option, will repair or replace products that prove to be defective. PTZOptics manufacturers its hardware
products from parts and components that are new or equivalent to new in accordance with industry standard
practices.
Supplied Accessories
When you unpack your camera, make sure that all the supplied
accessories are included:
• Camera 1
• AC Power Supply 1
• IR Remote 1
• Quick Start Guide 1
• AAA Batteries 2
• USB-A to USB-C Screw Locking Cable 1
• LED Panel Light 1
FCC Statement
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radiofrequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. FCC Caution: Any changes or modication
not expressly approved by the party responsible for compliance could void the user’s authority to operate this
equipment. Operation is subject to the following two conditions: This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
• Warning - This is a class A product. In a domestic environment, this product may cause radio inter-
ference in which case the user may be required to take adequate measures.
• Remote Control Battery Safety Information - Store batteries in a cool and dry place. Do not throw
away used batteries in the trash. Properly dispose of used batteries through specially approved
disposal methods. Remove the batteries if they are not in use for long periods of time. Battery
leakage and corrosion can damage the remote control. Do not use old batteries with new batteries.
Do not mix and use dierent types of batteries: alkaline, standard (carbon-zinc) or rechargeable
(nickel-cadmium). Do not dispose of batteries in a re. Do not attempt to short-circuit the battery
terminals.
Copyright Notice
The entire contents of this manual / guide, whose copyright belongs to PTZOptics, may not be cloned, copied, or translated in any way
without the explicit permission of the company. The product specications referred to in this document are for reference only and as
such are subject to updating at any time without prior notice.
©2022 | PTZOptics | All Rights Reserved

5
v1_1 rev 11-22
NDI®|HX Connection
The NDI®|HX connection allows you to connect and control your camera through any NDI
compatible hardware or software on your Local Area Network. Once your camera is setup on a LAN,
you can utilize the NDI®|HX connection.
NDI® Setup:
1. Download and install the latest NDI®|HX Tools from https://www.ndi.tv/tools.
2. Congure your camera settings from the NDI Cong tab in the camera’s web interface.
3. Select your camera within the NDI®|HX compatible device.
4. Select your camera. The NDI feed will utilize the camera’s device friendly name.
NewTek® NDI®, NDI® 4 & NDI®|HX are all registered trademarks by NewTek®.
Please note that your NDI License key is non-transferrable.

6
v1_1 rev 11-22
Item Name
1 HDMI Interface
2 Horizontal and Vertical Screen Switch
3 MIC IN Interface
4 Power Indicator
5 DC 12V Power Interface
6 LAN (PoE) Interface
7 USB 3.0 Interface (Type C)
8 USB 2.0 Interface (Does not supply Video)
1
2
3 4
5
6
7
8
Connection Guide

7
v1_1 rev 11-22
Dimensional Drawings

8
v1_1 rev 11-22
Features
• Full-featured USB Interface
Full-featured USB Type-C interface, compatible with USB 3.0 and USB 2.0, supports
audio, encoding output, and UVC 1.5.
• Precise Focus
Equipped with TOF close-range assisted focusing, combined with advanced focusing
algorithms, it can quickly and stably focus regardless of distance.
• 1080P HD Image
Adopts a new generation of Panasonic 1/2.8-inch, 2.07 million eective pixel
high-quality HD CMOS sensor, which can achieve high-quality images with a
maximum resolution of 1920x1080.
• Easy to Use
Supports Portrait and Landscape screen switching. Suitable for horizontal and vertical
screen display screens. USB plug-and-play, simple and fast. The cold shoe mount allows
the panel light or an external microphone to be integrated to enrich the scene.
• HDMI 1.4b
Supports HDMI 1.4b, can directly output uncompressed 1080P60 original video.
• 72.5° Wide Lens + 12x Optical Zoom
Adopts 72.5° high quality ultra wide-angle lens, optical zoom up to 12x, and supports
16x digital zoom.
• LED Panel Light
Color adjustment with warm/natural light and dimming range. Can be charged by Studio
Pro USB 2.0 port.
• Supports PoE
Supports PoE power control, video and audio only needs one network cable to
complete.
• Network Encoding Output
Supports dual network video stream output (rst stream, second stream).
• Multiple Interfaces
Supports HDMI, USB 3.0 and network interface, can output 1080P60 video at the same
time.
• Three Power Supply Methods
Supports USB 5V, DC 12V power adapter and PoE power supply.

9
v1_1 rev 11-22
Model PT-STUDIOPRO
Type PTZOptics Studio Pro
Camera
Video System 1080P@60 / 50 / 30, 1080I@60 / 50, 720P@60 / 50
Sensor 1/2.8", CMOS, Eective Pixels 2.07M
Scanning Mode Progressive
Lens f=3.5mm ~ 42.3mm, F1.8 ~ F2.8
Zoom 16X Digital Zoom, 12X Optical Zoom
Minimal Illumination 0.5 Lux @ (F1.8, AGC ON)
Shutter 1/30s ~ 1/190s
White Balance Auto, Indoor, Outdoor, One Push, Manual, VAR
Digital Noise Reduction 2D & 3D Digital Noise Reduction
Video S/N ≥55dB
Horizontal Angle of View 6.9° ~ 72.5°
Vertical Angle of View 3.9° ~ 44.8°
Horizantal & Vertical Flip Supported
Image Freeze Supported
LED Color Adjustment with warm.Natural Light and Dimming range
Number of Presets 255
Network Features
Operating System Windows 7 / 8.1 / 10 / 11, Mac OS, Linux, Android,
Color System / Compression YUY2 / H.264 / MJPEG
Video Format YUY2 (ISOC), H.264 AVC, H.264 SVC, MJPEG
USB Audio Supported
USB Video Protocol UVC 1.1 ~ 1.5
UVC PTZ Support
Video Compression H.264 / H.265 / MJPEG
Video Stream Capable of up to two simultaneous video streams.
First Stream Resolution 1920x1080, 1280x720, 640x480, 640x360
Second Stream Resolution 1280x720, 1024x576, 720x576(50Hz support), 720x480(60Hz
support), 720x408, 640x360, 480x270, 320x240, 320x180
Video Bit Rate 32Kbps ~ 102400Kbps
Bit Rate Control CBR, VBR
Frame Rate 50Hz: 1fps ~ 50fps, 60Hz: 1fps ~ 60fps
Audio Compression AAC
Audio Bit Rate 96Kbps, 128Kbps, 256Kbps
Support Protocols TCP/IP, HTTP, RTSP, RTMP, ONVIF, DHCP, and Multicast.

10
v1_1 rev 11-22
Interface
USB Interface USB 3.0: Type C, Supplies Video
USB 2.0: Type A, Only supplies power to 3rd Party Devices
HD Output HDMI 1.4b
Audio Interface MIC IN: 3.5mm
Network Interface 1 x RJ45: 10M/100M, Adaptive Ethernet Port, support PoE
Power Jack JEITA type (DC IN 12V)
H & V Screen Switch Vertical Screen, Horizontal Screen
Physical Parameter
Input Voltage DC 12V / USB 5V / PoE(802.3af)
Current Consumption 12V 1.0A (Max.) / 5V 1.5A (Max.)
Operating Temperature 14F ~ 104F (-10°C ~ 40°C)
Storage Temperature -40F~ 140F (-40°C ~ 60°C)
Power Consumption 6W
Dimensions 5.8 x 4.4 x 3.0 (inches) / 147 x 113 x 77 (mm)
Weight 1.54 lbs / 0.7Kg

11
v1_1 rev 11-22
IR Remote Controller
Guide
1. Standby Button
Press this button to enter standby mode.
Press it again to enter normal mode.
Note: Power consumption in standby
mode is approximately half of the normal
mode.
2. Position Buttons
To set or call preset position.
3. * Button
For multiple functions. Typically used when
calling shortcuts.
4 & 13. Set / Clear Preset Buttons
Set Preset: Store a preset position
[PRESET] + Numeric button (0-9):
Setting a corresponding numeric key
preset position.
Clear Preset: Erase a preset position.
[RESET] + Numeric button (0-9) or;
[*] + [#] + [RESET]: Erase all presets
5 & 14. Pan / Tilt Control Buttons
Press the arrow buttons to
pan and tilt. Press the [HOME] button to
face the camera back to the front.
(PTZ Cameras Only)
6. Return Button
Press the [RETURN] button to go back
a previous menu within the OSD menu.
7. Zoom Buttons
Zoom+: Zoom In (Slow and fast speed).
Zoom-: Zoom Out (Slow and fast
speed).
8. L / R Set Buttons
Set the Left & Right direction of the
remote control.
[L/R SET] + [1]: Normal direction
[L/R SET] + [2]: Left and right directions
will be reversed.
Press buttons simultaneously.
9. Focus Buttons
Used for focus adjustment.
[AUTO]: Automatically focus image on
the center object.
[MANUAL]: Allow for manual control
of focus. Make adjustments using [FAR]
(focus on far object) and [NEAR] (focus
on near object).
10. Camera Address Select Buttons
Press the camera select button
corresponding to the camera in which
you want to operate.

12
v1_1 rev 11-22
11. # Button
For multiple functions. Typically used
when calling shortcuts
12. Multiple Function Buttons
Function 1. For setting camera IR
address.
Press 3 keys in sequence to set the
camera IR address as follows:
[*] > [#] > [F1]: Address 1
[*] > [#] > [F2]: Address 2
[*] > [#] > [F3]: Address 3
[*] > [#] > [F4]: Address 4
Function 2. Image Freeze function
Press [F4] to enable Image Freeze. After
enabled, “Freeze” will be displayed in
the upper left corner for 5 seconds.
To disable Image Freeze, press [F4]
again.
15. Menu Settings
Used for adjusting the camera On Screen
Display (OSD) settings
[MENU]: Open or close the On Screen
Display menu
16. Backlight Button
Use to enable or disable backlight
compensation.
Note: Only eective in auto exposure
mode.
Note: If there is light behind the subject,
the subject may appear darker. In
this case, use Backlight Compensation to
enhance image.
17. P / T RST Button
Perform camera self-calibrate pan and tilt
movement. (PTZ Cameras Only)
18. Shortcut Functions:
[*] > [#] >[1]: Display OSD menu in
English
[*] > [#] > [3]: Display OSD menu in
Chinese
[*] > [#] > [4]: Show IP address
[*] > [#] > [6]: Quickly restore the
default settings
[*] > [#] > [8]: Show the camera version
[*] > [#] > [9]: Quickly set mount mode
(ip / normal)
[*] > [#] > [MANUAL]: Resets IP
information to default
[#] > [*] > [7]: OnePush White Balance
Trigger (Camera must be in
OnePush White Balance)
[*] > [*] > [AUTO] Performs the “Startup
Dance” on repeat
[#] > [*] > [4]: Enable Dynamic IP address
[#] > [*] > [#] > [1]: Sets IP address to
192.168.100.81
[#] > [*] > [#] > [2]: Sets IP address to
192.168.100.82
[#] > [*] > [#] > [3]: Sets IP address to
192.168.100.83
[#] > [*] > [#] > [4]: Sets IP address to
192.168.100.84
[#] > [*] > [#] > [5]: Sets IP address to
192.168.100.85
[#] > [*] > [#] > [6]: Sets IP address to
192.168.100.86
[#] > [*] > [#] > [7]: Sets IP address to
192.168.100.87
[#] > [*] > [#] > [8]: Sets IP address to
192.168.100.88
[#] > [*] > [#] > [9]: Sets IP address to
192.168.100.89
[#] > [*] > [#] +>[0]: Sets IP address to
192.168.100.80
[#] > [*] > [7]: OnePush White Balance
Trigger (Camera must be in
OnePush White Balance)

13
v1_1 rev 11-22
Part 1: Camera Issued Commands
ACK / Completion Messages
Command Function Command Packet Comments
ACK / Completion Messages
ACK
z0 4y FF
(y: Socket No.)
Returned when the command is accepted.
Completion z0 5y FF
(y: Socket No.)
Returned when the command has been
executed.
Error Messages
Command Function Command Packet Comments
Error Messages
Syntax Error
z0 60 02 FF Returned when the command format is dierent or
when a command with illegal command parameters is
accepted.
Command Buer Full
z0 60 03 FF Indicates that two sockets are already being used
(executing two commands) and the command could not
be accepted when received
Command Canceled
z0 6y 04 FF
(y: Socket No.)
Returned when a command which is being executed in
a socket specied by the cancel command is canceled.
The completion message for the command is not
returned.
No Socket
z0 6y 05 FF
(y: Socket No.)
Returned when no command is executed in a socket
specied nu the cancel command, or when an invalid
Socket No. is specied
Command Not Executable
z0 6y 41 FF
(y: Execution command
Socket No. Inquiry
command: 0)
Returned when a command cannot be executed due
to current conditions. For example: when commands
controlling the focus manually are received during auto
focus mode.
VISCA over IP control: z = 9
Serial VISCA control: z = Camera Address + 8
Part 2:PTZOptics Command List
Command Function Command Packet Comments
IF Clear Broadcast 8x 01 00 01 FF I/F Clear
CAM_Power
On 8x 01 04 00 02 FF Power On/O
O 8x 01 04 00 03 FF
CAM_Zoom
Stop 8x 01 04 07 00 FF
Tele (Standard) 8x 01 04 07 02 FF
Wide (Standard) 8x 01 04 07 03 FF
Tele (Variable) 8x 01 04 07 2p FF p = 0 (low) – 7 (high)
Wide (Variable) 8x 01 04 07 3p FF
Direct 8x 01 04 47 p q r s FF
PTZOptics Serial VISCA & VISCA over IP Command List

14
v1_1 rev 11-22
CAM_Focus
Stop 8x 01 04 08 00 FF
Far (Standard) 8x 01 04 08 02 FF
Near (Standard) 8x 01 04 08 03 FF
Far (Variable) 8x 01 04 08 2p FF p = 0 (low) – 7 (high)
Near (Variable) 8x 01 04 08 3p FF
Direct 8x 01 04 48 0p 0q 0r 0s FF
pqrs: Zoom Position
(0x04 0x00 0x00 0x00 = Full Zoom in.
0x00 0x00 0x00 0x00 = Full Zoom out.)
Auto Focus 8x 01 04 38 02 FF
Auto Focus On / OManual Focus 8x 01 04 38 03 FF
Auto / Manual 8x 01 04 38 10 FF
Snap Focus 8x 01 04 38 04 FF Focus image while maintaining manual
focus mode.
Focus Lock 8x 0a 04 68 02 FF Prevents any other operation or
command from adjusting the current
focus state.
Focus Unlock 8x 0a 04 68 03 FF
CAM_AFSensitivity
High 8x 01 04 58 01 FF
AF Sensitivity High / Normal / LowNormal 8x 01 04 58 02 FF
Low 8x 01 04 58 03 FF
CAM_WB
Auto 8x 01 04 35 00 FF Normal Auto mode
Indoor 8x 01 04 35 01 FF Indoor mode
Outdoor 8x 01 04 35 02 FF Outdoor mode
OnePush 8x 01 04 35 03 FF One Push White Balance mode
Manual 8x 01 04 35 05 FF Manual control mode
ColorTemperature (VAR) 8x 01 04 35 20 FF Color Temperature mode
OnePush Trigger 8x 01 04 10 05 FF One Push White Balance Trigger
CAM_RGain
Reset 8x 01 04 03 00 FF Default Bright position
Up 8x 01 04 03 02 FF
Down 8x 01 04 03 03 FF
Direct 8x 01 04 43 00 00 0p 0q FF pq: Red Gain
CAM_BGain
Reset 8x 01 04 04 00 FF Manual control of blue gain
Up 8x 01 04 04 02 FF
Down 8x 01 04 04 03 FF
Direct 8x 01 04 44 00 00 0p 0q FF pq: Blue Gain
CAM_ColorTemp
Reset 8x 01 04 20 00 FF Default ColorTemperature settings
Up 8x 01 04 20 02 FF
Down 8x 01 04 20 03 FF
Direct 8x 01 04 20 0p 0q FF pq: ColorTemperature position: 0x00:
2500K ~ 0x37: 8000K
CAM_RTuning Direct 8x 0A 01 12 pq FF pq: Red / Blue Tuning position 0x00
(-10) ~ 0x14 (+10)
CAM_BTuning Direct 8x 0A 01 13 pq FF
CAM_AE
Full Auto 8x 01 04 39 00 FF Automatic Exposure mode
Manual 8x 01 04 39 03 FF Manual exposure mode
Shutter Priority 8x 01 04 39 0A FF Shutter priority auto exposure mode
Iris Priority 8x 01 04 39 0B FF Iris priority auto exposure mode
Bright 8x 01 04 39 0D FF Bright manual exposure mode

15
v1_1 rev 11-22
CAM_Iris
Reset 8x 01 04 0B 00 FF Default Iris position
Up 8x 01 04 0B 02 FF
Iris setting
Down 8x 01 04 0B 03 FF
Direct 8x 01 04 4B 00 00 0p 0q FF pq: Iris position
CAM_DRC Direct 8x 01 06 01 0E 0E 03 02 FF p: 0(low) - 8(high)
CAM_Shutter
Reset 8x 01 04 0A 00 FF Default shutter position
Up 8x 01 04 0A 02 FF
Shutter setting
Down 8x 01 04 0A 03 FF
Direct 8x 01 04 4A 00 00 0p 0q FF pq: Shutter position
CAM_Gain
Reset 8x 01 04 0C 00 FF Gain Setting
Up 8x 01 04 0C 02 FF
Down 8x 01 04 0C 03 FF
Direct 8x 01 04 0C 00 00 0p 0q FF pq: Gain Position
Gain Limit 8x 01 04 2C 0p FF p: Gain Position
CAM_Bright
Reset 8x 01 04 0D 00 FF Default Bright position
Up 8x 01 04 0D 02 FF Bright setting
Down 8x 01 04 0D 03 FF
Direct 8x 01 04 0D 00 00 0p 0q FF pq: Bright position
CAM_ExpComp
On 8x 01 04 3E 02 FF Exposure Compensation On / O
O 8x 01 04 3E 03 FF
Reset 8x 01 04 0E 00 FF Default ExpComp position
Up 8x 01 04 0E 02 FF ExpComp setting
Down 8x 01 04 0E 03 FF
DIrect 8x 01 04 4E 00 00 0p 0q FF pq: ExpComp position
CAM_NR(2D)Mode Auto 8x 01 04 50 02 FF ND2D Auto/Manual
Manual 8x 01 04 50 03 FF
CAM_NR(2D)Level Direct 8x 01 04 53 0p FF p: NR Setting (0: O, level 1 to 5)
CAM_NR(3D)Level Direct 8x 01 04 54 0p FF p: NR Setting (0: O, level 1 to 8)
CAM_WDRStrength
Reset 8x 01 04 21 00 FF
Up 8x 01 04 21 02 FF
Down 8x 01 04 21 03 FF
Direct 8x 01 04 51 00 00 0p 0q FF pq: WDR Level Positon
CAM_Backlight On 8x 01 04 33 02 FF Backlight Compensation On / O
O 8x 01 04 33 03 FF
CAM_Flicker -8x 01 04 23 0p FF p: Flicker settings - (0: O, 1: 50Hz, 2:
60Hz)
CAM_ApertureMode
(Sharpness)
Auto 8x 01 04 05 02 FF
Manual 8x 01 04 05 03 FF
CAM_Aperture
(sharpness)
Reset 8x 01 04 02 00 FF Aperture Control
Up 8x 01 04 02 02 FF
Down 8x 01 04 02 03 FF
Direct 8x 01 04 42 00 00 0p 0q FF pq: Aperture Gain
x = Camera Address + 8

16
v1_1 rev 11-22
CAM_Picture Eect O 8x 01 04 63 00 FF
Picture Eect setting
B&W 8x 01 04 63 04 FF
CAM_Memory
Reset 8x 01 04 3F 00 pp FF
pp: Memory number (=0 to 127)Set 8x 01 04 3F 01 pp FF
Recall 8x 01 04 3F 02 pp FF
Preset_Recall_ Speed Preset Speed 8x 01 06 01 p FF P: Speed grade (0x01 ~ 0x18)
CAM_ImageFreeze Freeze Image 8x 01 04 62 0p FF p: 2 ON; p: 3 OFF
CAM_LR_ Reverse
On 8x 01 04 61 02 FF
Image Flip Horizontal On / O
O 8x 01 04 61 03 FF
CAM_PictureFlip On 8x 01 04 66 02 FF Image Flip Vertical On / O
O 8x 01 04 66 03 FF
CAM_ColorGain Direct 8x 01 04 49 00 00 00 0p FF P: Color Gain setting 0h (60%) to
Eh(200%)
Pan_TiltDrive
Up 8x 01 06 01 VV WW 03 01 FF
VV: Pan Speed 0x01 (low) to 0x18 (high)
WW: Tilt Speed 0x01 (low) to 0x14 (high)
Down 8x 01 06 01 VV WW 03 02 FF
Left 8x 01 06 01 VV WW 01 03 FF
RIght 8x 01 06 01 VV WW 02 03 FF
UpLeft 8x 01 06 01 VV WW 01 01 FF
UpRight 8x 01 06 01 VV WW 02 01 FF
DownLeft 8x 01 06 01 VV WW 01 02 FF
DownRight 8x 01 06 01 VV WW 02 02 FF
Stop 8x 01 06 01 VV WW 03 03 FF
AbsolutePosition 8x 01 06 02 VV WW 0Y 0Y 0Y
0Y 0Z 0Z 0Z 0Z FF YYYY: Pan position, ZZZZ: Tilt position
RelativePosition 8x 01 06 03 VV WW 0Y 0Y 0Y
0Y 0Z 0Z 0Z 0Z FF
Home 8x 01 06 04 FF
Reset 8x 01 06 05 FF
Pan_TiltLimitSet
LimitSet 8x 01 06 07 00 0W 0Y 0Y 0Y
0Y 0Z 0Z 0Z 0Z FF
W: 1 (UpRight), 0: DownLeft
YYYY: Pan position, ZZZZ: Tilt position
LimitClear 8x 01 06 07 01 0W 07 0F 0F
0F 07 0F 0F 0F FF
CAM_Brightness Direct 8x 01 04 A1 00 00 0p 0q FF pq: Brightness position
CAM_Contrast Direct 8x 01 04 A2 00 00 0p 0q FF pq: Contrast position
CAM_Flip
O 8x 01 04 A4 00 FF
Single Command for video ip
Flip-H 8x 01 04 A4 01 FF
Flip-V 8x 01 04 A4 02 FF
Flip-HV 8x 01 04 A4 03 FF
CAM_SettingSave Save 8x 01 04 A5 10 FF Save Current Setting
CAM_AWB Sensitivity
High 8x 01 04 A9 00 FF
Normal 8x 01 04 A9 01 FF
Low 8x 01 04 A9 02 FF
CAM_AFZone
Top 8x 01 04 AA 00 FF
AF Zone weight selectCenter 8x 01 04 AA 01 FF
Bottom 8x 01 04 AA 02 FF

17
v1_1 rev 11-22
CAM_AFZone
Top 8x 01 04 AA 00 FF
AF Zone weight selectCenter 8x 01 04 AA 01 FF
Bottom 8x 01 04 AA 02 FF
CAM_ColorHue Direct 8x 01 04 4F 00 00 00 0p FF P: Color Hue setting 0h (-14°) to Eh (+14°)
OSD_Control
Open / Close 8x 01 04 3F 02 5F FF
Close 8x 01 06 06 03 FF
Navigate Up 8x 01 06 01 0E 0E 03 01 FF
Navigate Down 8x 01 06 01 0E 0E 03 02 FF
Navigate Left 8x 01 06 01 0E 0E 01 03 FF
Navigate Right 8x 01 06 01 0E 0E 02 03 FF
Enter 8x 01 06 06 05 FF
Return 8x 01 06 06 04 FF
CAM_LensType
Type1 8x 0A 01 04 1B 00 FF
Type 2 8x 0A 01 04 1B 01 FF
CAM_AFCalibration Re-Calibrates Focus 8x 0A 01 03 12 FF Corrects camera focus capabilities
CAM_TallyLight Tally Light Control 8x 0A 02 02 0p FF p=1: Flashing, p=2: Light always on, p=3:
normal
CAM_NDIMode
High 8x 0B 01 01 FF
Medium 8x 0B 01 02 FF
Low 8x 0B 01 03 FF
O 8x 0B 01 04 FF
CAM_Multicast Mode Multicast Mode 8x 0B 01 23 0p FF p=1: On, p=2: O
CAM_PTZMotion Sync
PTZ Motion Sync On 8x 0A 11 13 02 FF
PTZ Motion Sync O 8x 0A 11 13 03 FF
PTZ MS Upper Speed Limit 8x 0A 11 14 pq FF
pq: Speed stage
PTZ MS Lower Speed Limit 8x 0A 11 14 pq FF
CAM_UACStatus Toggle USB Audio 8x 2a 02 a0 04 0p FF p=2: On, p=3: O
CAM_RTMPSet Toggle RTMP 8x 0A 11 A8 pq FF p: 1 Stream 1; p: 2 stream 2; q: 2 ON, q: 3
OFF
CAM_FocusRange Focus Range 8x 0A 11 42 0p rs tv FF p=0: O p=1: On, rs: furthest position(0x00
~ 0x0B), tv: nearest position(0x00 ~ 0x0B)
CAM_SettingSave Save 8x 01 04 A5 10 FF Save Current Setting
CAM_SettingReset Reset 8x 01 04 A0 10 FF Reset to Factory Settings
CAM_NetworkReset Reset Network Parameters 8x 0A 01 AA FF
VISCA over IP control: x = 1
Serial VISCA control: x = Camera Address + 8

18
v1_1 rev 11-22
Part 3: PTZOptics Query Command List
CAM_PowerIng 8x 09 04 00 FF y0 50 02 FF On
y0 50 03 FF O (Standby)
y0 50 04 FF Internal Power Circuit Error
CAM_ZoomPosIng 8x 09 04 47 FF y0 50 0p 0q 0r 0s FF pqrs: Zoom position
CAM_FocusAFModeIng 8x 09 04 48 FF y0 50 02 FF AutoFocus
y0 50 03 FF Manual Focus
CAM_FocusPosIng 8x 09 04 35 FF y0 50 0p 0q 0r 0s FF pqrs: Focus Position
CAM_WBModeIng 8x 09 04 35 FF
y0 50 00 FF Auto
y0 50 01 FF Indoor
y0 50 02 FF Outdoor
y0 50 03 FF OnePush
y0 50 05 FF Manual
ColorTemperature
CAM_RGainIng 8x 09 04 43 FF y0 50 00 00 0p 0q FF pq: Red Gain
CAM_BGainIng 8x 09 04 44 FF y0 50 00 00 0p 0q FF pq: Blue Gain
CAM_ColorTempIng y0 50 pq FF pq: ColorTemperature position
CAM_RTuningInq 8x 09 04 12 FF 90 50 00 00 0p 0q FF pq: 0x00 ~ 0x14
CAM_BTuningInq 8x 09 04 13 FF 90 50 00 00 0p 0q FF pq: 0x00 ~ 0x14
CAM_AEModeIng 8x 09 04 39 FF
y0 50 00 FF Full Auto
y0 50 03 FF Manual
y0 50 0A FF Shutter Priority (SAE)
y0 50 0B FF Iris Priority (AAE)
y0 50 0D FF Bright
CAM_ShutterPosIng 8x 09 04 4A FF y0 50 00 00 0p 0q FF pq: Shutter position
CAM_IrisPosIng 8x 09 04 4B FF y0 50 00 00 0p 0q FF pq: Iris position
CAM_BrightPosInq 8x 09 04 4D FF y0 50 00 00 0p 0q FF pq: Bright position
CAM_ExpCompModeInq 8x 09 04 3E FF
y0 50 02 FF On
y0 50 03 FF O
CAM_ExpCompPosInq 8x 09 04 4E FF y0 50 00 00 0p 0q FF pq: ExpComp position
CAM_BacklightModeInq 8x 09 04 33 FF
y0 50 02 FF On
y0 50 03 FF O
CAM_Noise2DModeInq 8x 09 04 50 FF
y0 50 02 FF Auto Noise 2D
y0 50 03 FF Manual Noise 2D
CAM_Noise2DLevel 8x 09 04 53 FF y0 50 0p FF Noise Reduction (2D) p: 0 to 5
CAM_Noise3DLevel 8x 09 04 54 FF y0 50 0p FF Noise Reduction (3D) p: 0 to 5
CAM_FlickerModeInq 8x 09 04 55 FF y0 50 0p FF p=0: O, 1: 50Hz, 2: 60Hz
CAM_ApertureModeInq
(Sharpness) 8x 09 04 05 FF
y0 50 02 FF Auto Sharpness
y0 50 03 FF Manual Sharpness
SYS_MenuModeInq 8x 09 06 06 FF
y0 50 02 FF On
y0 50 03 FF O
CAM_PictureEectModeInq 8x 09 04 63 FF
y0 50 02 FF O
y0 50 04 FF B&W

19
v1_1 rev 11-22
CAM_MemoryInq 8x 09 04 3F FF y0 50 0p FF p: Memory number last operated
CAM_LR_ReverseIng 8x 09 04 61 FF
y0 50 02 FF On
y0 50 03 FF O
CAM_PictureFlipIng 8x 09 04 66 FF
y0 50 02 FF On
y0 50 03 FF O
CAM_ColorGainIng 8x 09 04 49 FF y0 50 00 00 00 0p FF P: Color gain 0h (60%) to Eh (200%)
CAM_PanTiltPosIng 8x 09 06 12 FF y0 50 0w 0w 0w 0w 0z 0z
0z 0z FF
WWWW: Pan position, ZZZZ: Tilt position
CAM_GainLimitIng 8x 09 04 2C FF y0 50 0q FF p: Gain limit
CAM_AFSensitivityIng 8x 09 04 58 FF
y0 50 01 FF High
y0 50 02 FF Normal
y0 50 03 FF Low
CAM_BrightnessIng 8x 09 04 A1 FF y0 50 00 00 0p 0q FF pq: Brightness position
CAM_ContrastIng 8x 09 04 A2 FF y0 50 00 00 0p 0q FF pq: Contrast position
CAM_FlipIng 8x 09 04 A4 FF y0 50 00 FF O
y0 50 01 FF Flip-H
y0 50 02 FF Flip-V
y0 50 03 FF Flip-HV
CAM_AFZone 8x 09 04 AA FF y0 50 00 FF Top
y0 50 01 FF Center
y0 50 02 FF Bottom
CAM_ColorHueIng 8x 09 04 4F FF y0 50 00 00 00 0p FF P: Color Hue 0h (-14°) to Eh (+14°)
CAM_AWBSensitivityInq 8x 09 04 A9 FF
y0 50 00 FF High
y0 50 01 FF Normal
y0 50 02 FF Low
CAM_UACInq
8x 2A 02 A0 04
FF
y0 50 02 FF On
y0 50 03 FF O
CAM_PTZMotionSyncInq
8x 09 11 13 FF 90 50 0p FF p: MotionSync setting 0: O, 1: On
8x 09 11 14 FF 90 50 pq FF pq: Max MotionSync speed 00 (185) ~ 09
(230)
CAM_RTMPInq 8x 09 11 53 FF
90 50 00 FF Stream 1 OFF; Stream 2 OFF
90 50 01 FF Stream 1 ON; Stream 2 OFF
90 50 02 FF Stream 1 OFF; Stream 2 ON
90 50 03 FF Stream 1 ON; Stream 2 ON
VISCA over IP control: x = 1
Serial VISCA control: x = Camera Address + 8
Block Inquiry Command List
Command Command Packet Inquiry Packet Comments
CAM_LensBlockIng 8x 09 7E 7E 00 FF y0 50 0u 0u 0u 0u 00 00
0v 0v 0v 0v 00 0w 00
FF
UUUU: Zoom position
VVVV: Focus position
W.bit0: Focus mode 1: Auto, 0:
manual

20
v1_1 rev 11-22
CAM_CameraBlockIng 8x 09 7E 7E 01 FF y0 50 0p 0p 0q 0q 0r 0s
tt 0u vv ww 00 xx 0z
FF
PP: Red Gain,
QQ: Blue Gain
R: WB Mode,
S: Aperture
TT: AE Mode,
U.bit2: Backlight
U.bit1: Exposure Comp,
VV: Shutter position.
WW: Iris position,
XX Bright position,
Z: Exposure Comp position
CAM_OtherBlockIng 8x 09 7E 7E 02 FF y0 50 0p 0q 00 0r 00 00
00 00 00 00 00 00 00
FF
P.bit0: Power 1: On, 0: O,
Q.bit2: LR Reverse: 1: On, 0:
O R.bit3~0: Picture Eect
Mode
CAM_EnlargmentBlockIng 8x 09 7E 7E 03 FF y0 50 00 00 00 00 00 00
00 0p 0q rr 0s 0t 0u FF
P: AF sensitivity
Q.bit0: Picture ip: 1: On, 0:
O RR.bit6~3: Color Gain (0h
(60%) to Eh (200%))
S: Flip 0: O, 1: Flip-H, 2: FlipV,
3: Flip-HV
T.bit2~0: NR2D level
U: Gain limit
VISCA over IP control: x = 1
Serial VISCA control: x = Camera Address + 8
VISCA over IP control: y = 9
Serial VISCA control: y = Camera Address + 8
Table of contents
Other PTZOptics Conference System manuals

PTZOptics
PTZOptics 20X-SDI User manual

PTZOptics
PTZOptics PT20X-SDI-WH-G2 User manual

PTZOptics
PTZOptics PT12X-NDI-GY User manual

PTZOptics
PTZOptics PT30X-NDI-GY User manual

PTZOptics
PTZOptics PT12X-USB-GY-G2 User manual

PTZOptics
PTZOptics PT20X-USB-WH-G2 User manual

PTZOptics
PTZOptics 12X NDI|HX ZCAM User manual