Pulsar RAWO7 User manual

Code: RAWO7
Name: 7U/150mm/17 Ah two-level RACK Security
enclosure for RACK19" cabinets
v1.0
EN
Edition: 1 from 25.01.2017
Supersedes the edition: --------------
1. Application:
The metal RAWO7 enclosure is designed for mounting the alarm control panel and the input/output modules in
RACK19” cabinets. The enclosure has a removable mounting plate (1st level) and a removable hinged mounting plate (2nd
level). The enclosure has a battery compartment for a single 7Ah/12V battery. The mounting plate (1st level) has holes for
mounting transformers of the TOR/TRP/TRZ series and power supply units of the PS…/PSB…/PSBOC… series by Pulsar.
The hinged mounting plate (level II) is fitted with universal holes for mounting of control panels and expansion modules of
the following companies: DSC, PARADOX, RISCO, SATEL, PYRONIX, TEXECOM, TELMOR, ROGER and EBS.
Fig.1
2. Mounting the enclosure to RACK 19” cabinets:
Mount cage nuts for M6 screws in the RACK cabinet, as shown in Figure 2. Use M6 screws to mount the enclosure
to the RACK profiles.
Fig.2

2
3. The introduction of cables into the enclosure:
The enclosure has four openings (at each side) for the introduction of cables. All openings are fitted with rubber
grommets, Fig. 3.
Fig.3
Wires can be introduced in three ways:
a) Through rubber grommets –fig.4
Fig.4
b) Using the MM019 / MM020 protection tubes - fig.5.
Fig. 5

3
c) Using the MM019 / MM020 protection tubes and the ARAP16P/ ARAP21P cable glands - fig.6
Fig. 6
4. Mounting the transformer/PSU/battery/other modules:
The enclosure is equipped with a hinged mounting plate (1st level) with holes for mounting of transformer of the
TOR/TRP/TRZ series and power supply units of the PS…/PSB…/PSBOC… series by Pulsar. The enclosure has a battery
compartment for a single 7Ah/12V battery.
Fig. 7
5. Securing wires to a hinged mounting plate:
The enclosure is equipped with a hinged mounting plate (2nd level) with holes for mounting of control panels and
expansion modules. Universal holes are dedicated for control panels and expansion modules of the following companies:
DSC, PARADOX, RISCO, SATEL, PYRONIX, CROW, and ROGER. The hinged mounting plate is fitted with handles to
secure the signal wires. Mounting of control panels / expansion modules / wires is shown in Fig. 8.
Fig. 8

4
6. Dimensioning:
7. Control panels and modules that can be mounted in the enclosure:
DSC: (PC 1616, 1832, 1864, 4020) + 5x 5108 ( 4108, 5208, 5100, 4116)
(PC 5204, 5400, 5200, 5580, 4216, 4204) + 5x 5108 ( 4108, 5208, 5100, 4116)
PARADOX: ( E55, E65, 728ULT, EVO48, EVO192, SP4000, SP5500, SP6000, SP7000) + 5 x Z X 8 ( Z X 4,
APR3-HUB2)
RISCO: PRO24, 116, 128, 140 + 3x EZ16
PRO24, 116, 128, 140 + 4x E04 (EZ08, RP296 EPS)
SATEL: CA4V1, CA5, CA6
(VERSA 5, 10, 15, CA10) + 5 x CA10E ( CA 64E, SM, MST1)
(INTEGRA 24, 32) + 5 x CA64E (SM)
Modules: CA64 ( PP, EPS, ADR, O-R, O-ROC,O-OC, OPS- OC, OPS- R, OPS- ROC,
VGM- 16, SR, PTSA) + 4x CA64E ( SM)
PYRONIX: MATRIX 424, 6, 816, 832, 832+
TEXECOM: PREMIER 412, 816, 832, 48, 88, 168, 640
TELMOR: TCA- 824, 4x (TEX800, TMT1)
ROGER: PR402, CPR 32-SE
EBS: PX 202A
PULSAR: 5x (MS1012, MSR1012, MSRK1012)
5x (MS2012, MSR2012, MSRK2012)

5
8. Technical parameters:
Battery compartment:
17Ah / 12V
Transformer / power supply
compartment:
TOR: 50÷150VA, TRP: 20÷80VA, TRZ: 20÷80VA / series Pulsar
PS..., PSB..., PSBOC...
Tamper protection:
2 x C/NO terminals (C/NC closed housing), 0,5A@30VDC/50VAC
Mounting dimensions:
W=19", H=7U
Enclosure dimensions:
W=430, H=310, D=150 mm
Net/gross weight:
6,20 / 6,75 [kg]
Finish:
steel plate 1mm, color RAL9005
Application:
Indoor
Notes:
- fixing on the front RACK 19'’ rails
- 10 M6 screws with cage nuts included
- the enclosure contains a mounting plate (Level I)
- the enclosure is equipped with a hinged mounting shelf
(Level II)
- universal holes in the enclosure for mounting of control panels and
expansion modules of the following companies: DSC, PARADOX,
RISCO, SATEL, PYRONIX, TEXECOM, TELMOR, ROGER, EBS
Available accessories:
- MM019 - protective tube ø16 / ø20 - power cord
- MM020 - protective tube ø21 / ø29 - signal wires
- ARAP16P - cable gland fi 16mm
- ARAP21P - cable gland fi 21mm
- transformers of the TOR/TRP/TRZ series: 20÷80VA
- power supplies PS..., PSB..., PSBOC... series
- batteries
Declarations, warranty
CE, 2 years from the production date
MANUFACTURER
Pulsar
Siedlec 150,
32-744 Łapczyca
Phone. [phone], Fax. ( [phone]
e-mail: [email protected], [email protected]
http:// www.pulsar.pl, www.zasilacze.pl