PURE PURESTEAM PRO User manual

5YEAR
WARRANTY

1
TABLE OF CONTENTS
IMPORTANT SAFETY INSTRUCTIONS ……………..………………….......... 1-2
PRODUCT DIAGRAM.........................................………..……….…........…... 3
ASSEMBLING PURESTEAM PRO ……………………………........................ 4
USING PURESTEAM PRO ……………………………….…………….…...…. 5-6
PRESSING WITH STEAM.…………………...........…………............…...…….6-7
QUICK STORAGE……................…………….………………...............……..... 7
CLEANING & LONG-TERM STORAGE………...….........….............……...... 8
PROBLEM SOLVING GUIDE...........................................…………………… 9
REMOVING MINERAL BUILDUP….......................................................... 10
PRODUCT SPECIFICATIONS…................................................................. 11
WARRANTY & PRODUCT REGISTRATION......................…………………… 12

2 3
IMPORTANT SAFETY INSTRUCTIONS
18. To reduce the likelihood of a circuit overload, do not operate another
high-wattage appliance on the same circuit as your steamer.
19. This marking indicates that this product should not be disposed
with other household wastes. To prevent possible harm to the
environment or human health from uncontrolled waste disposal,
recycle it responsibly to promote the sustainable reuse of
material resources. To return your used device, please use the return
and collection systems or contact the retailer where the product was
purchased. They can take this product for environmental safe recycling.
20. This appliance is not intended for use by persons (including children) with
reduced physical sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
21. Children should be supervised to ensure that they do not play with the
appliance.
22. DO NOT use accessories that are not made for PureSteam Pro. Doing
so may cause re, electrical shock, or injury.
23. Always turn the power switch off before unplugging or plugging in
PureSteam Pro.
24. DO NOT let the power cord touch hot surfaces or water. The power cord
should not be kinked or obstructed in any way.
25. DO NOT bend, twist or fold the steam hose.
26. Let appliance cool completely before putting away. Loop cord loosely
around appliance when storing.
27. DO NOT operate another high-wattage appliance on the same circuit as
PureSteam Pro. Doing so may cause a circuit overload,
28. If an extension cord is absolutely necessary, a 3-pronged cord rated for
at least 20 amperes should be used. Cords rated for less amperage may
overheat. Care should be taken to arrange the cord so that it cannot be
inadvertently pulled or tripped over.
29. To reduce the risk of contact with hot water emitting from steam vents,
check appliance before each use by holding it away from body and
operating steam button.
30. Do not leave appliance unattended while connected.
SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
Read all instructions, when using electrical appliances, always follow basic
safety precautions, including the following:
1. This product is intended for indoor use only.
2. Use PureSteam Pro for its intended purpose only.
3. To protect against risk of electrical shock, DO NOT submerge PureSteam
Pro in water or other liquids.
4. THIS APPLIANCE IS NOT A TOY. Close supervision is necessary
for any appliance being used by or near children. DO NOT leave the
appliance unattended while connected.
5. Unplug PureSteam Pro from the electrical outlet before adding or
removing parts and before lling with water, emptying or cleaning.
6. STEAM CAN CAUSE SERIOUS BURNS. Keep your hands, skin, and
hair away from the steam nozzle openings while steaming.
7. DO NOT touch the steam hose while steaming. It gets hot and can burn
your skin.
8. DO NOT point steam nozzle in the direction of people, plants, or pets
while steaming.
9. NEVER attempt to steam clothes while you are wearing them.
10. DO NOT operate PureSteam Pro if it is damaged in any way—especially
if the power cord or plug is damaged. Doing so may result in fire,
electrical shock, or injury.
11. DO NOT leave PureSteam Pro unattended while plugged in or in
operation.
12. DO NOT operate steamer without properly lling the water container.
13. Always keep the steam nozzle elevated above the water container. Do
not lay the hose on the oor.
14. PureSteam Pro has a grounded plug. As a safety feature, this plug will t
in a three-prong outlet only one way. If the plug does not t in the outlet,
do not attempt to bypass this safety feature.
15. Burns could occur from touching hot metal parts, hot water, or steam.
Use care when you turn a steam appliance upside down – there may be
hot water in the reservoir.
16. DO NOT pull the power cord to disconnect it from an outlet. Instead,
grasp the plug to remove it from the outlet.
17. To reduce the risk of contact with hot water and steam, always check
PureSteam Pro for steam leaks. Operate PureSteam Pro with the steam
nozzle placed in its holder; and inspect the base, hose, handle, and
nozzle for steam leaks.
1 2

4 5
1: Remove all contents in the box to ensure you
have all the pieces listed on Page 3.
2: Fully extend the Telescopic Pole, To do so, rst
open the clips and loosen the poles. Then, fully
extend the pole and close the clips on the pole to
lock in place (see Figure 2). Make sure the pole is
locked into place and cannot be pushed down.
NOTE: To ensure a steady ow of steam through
the steam hose, the telescopic pole must be fully
extended when operating PureSteam Pro.
3: To attach the hanger attachment, align the tabs
on the hanger with the grooves on the pole and
push down (see Figure 3).
4: Insert the bottom of the telescopic pole into the
pole base (see Figure 4) so that the steam nozzle
holder faces the rear of the steamer (see Figure
1). Pointing the steam nozzle holder towards the
rear will ensure the stability of the steamer when
garments are hanging from the clothes hanger
hook
5: To attach the steam hose: Align the hose nut
with the steam hose base and turn the hose nut
clockwise to tighten the hose onto the base (see
gure 5),
CAUTION: To prevent steam from causing bodily
injury or damage to surfaces, always hang the
steam nozzle on the nozzle holder when not in
use. Do not lay the steam hose on the floor as
condensation may occur and cause unwanted
water droplets in the steam.
CAUTION: Pulling on the steam hose with
excessive force will damage it and may cause a
steam leak.
PRODUCT DIAGRAM
3 4
1: Steam Nozzle
2: Steam Handle
3: Steam Hose
4: Steam Hose Base
5: Steam Control Knob
6: Indicator
7: Pedal Switch
8: Wheels
9: Cord Wrap
10: Power Cord
11: Water Tank
12: Telescopic Pole
13: Hanger
14: Hook
15: Fabric Brush
ASSEMBLING PURESTEAM PRO
Figure 2
Figure 3
Figure 4
Figure 5
Figure 1

6 7
USING PURESTEAM PRO
Once the steam ow is steady and excess condensation has been removed
from the steam hose, you may proceed with your steaming tasks.
CAUTION: Always be sure that the steam nozzle is pointed in a safe direction
(away from yourself, other people, pets and plants) when steaming.
7. When you are finished using the fabric steamer, Please turn off the
power switch and take o󰀨 the plug from the socket.
PRESSING WITH STEAM
1. To steam a garment, secure it carefully using the included garment hanger,
or for horizontal steam mode, place the garment on a clean, at surface.
CAUTION: Be careful when handling garments on the hanger.
Pulling on the garment with too much force may cause the unit to tip.
CAUTION: Hot steam may escape from the small holes when steaming.
Use caution.
2. Grasp the steam handle and place the steam nozzle at the bottom of
the garment. Steam will rise along the inside and outside of the fabric,
removing wrinkles. Slowly slide the nozzle vertically, from the bottom to
the top of the garment.
NOTE: Do not allow kinks to form in the hose at any time.
3. Place the Water Tank on the Water Reservoir. You should hear water
owing into the Water Reservoir for a short time.
4. Remove the steam nozzle from the garment, and smooth the fabric with
your free hand.Plug the unit into a properly grounded three-pronged
outlet.
5. Repeat steps 2 and 3 as necessary until the fabric is wrinkle free.
USING PURESTEAM PRO
1. Unplug the power cord.
2. Remove the water tank. Turn it upside down and unscrew the cap.
3. Fill the water tank with cool water and replace the cap.
NOTE: To prolong the life of PureSteam Pro, we recommend using
distilled or de-mineralized water.
NOTE: Do not substitute another water tank for the one designed for
this unit.
4. Place the water tank on the water reservoir. You should hear water
owing into the water reservoir for a short time.
CAUTION: Do not let the steamer operate with a dry water tank. Doing
so will cause damage to the unit.
5. Plug PureSteam Pro into a properly grounded three-pronged outlet.
6. Push the foot press button, after approximately 40 seconds of heating
time, unit will begin producing a ow of steam from Steam Nozzle.
NOTE: It is common for the unit to produce gurgling sounds and small
amounts of water during the rst few minutes of steaming. This is due to water
condensation inside cold Hose, and should be reduced as the Hose heats up.
Pointing Steam Nozzle downward and shaking it may help to remove excess
water from Hose more quickly.
Using the Steam Control Knob
The steam control knob o󰀨ers
4 convenient steam levels:
Level 1: Humidity Function
(450W; steam rate ~10ml/min)
Level 2: Iron Short-Sleeved
(900W; steam rate ~26ml/min)
Level 3: Iron Shirts
(1200W; steam rate ~38ml/min)
Level 4: Iron Suits
(1500W; steam rate ~50ml/min)
5 6

8 9
PRESSING WITH STEAM
6. When steaming horizontally keep the steam 4 inches from the fabric.
7. To remove wrinkles from towels, handkerchiefs and napkins, drape them
over a rod or towel rack and gently steam.
8. Heavier fabrics may require repeated steaming.
9. To remove stubborn wrinkles, steam both sides of the fabric.
10. The fabric brush may also be used to remove tough wrinkles.
QUICK STORAGE
1. Turn o󰀨 the unit and unplug the power cord.
2. Wrap the steam hose around the telescopic pole one time. Do not fold or
bend the hose.
3. Hang the steam nozzle from the nozzle holder.
4. Loosen the top two sections of the telescopic pole and collapse to a
compact height.
5. Push down on the pole top; the pole will collapse to a compact height.
6. Roll the unit to a convenient storage location.
CLEANING AND LONG-TERM STORAGE
For maximium performance, you should clean PureSteam Pro weekly. Using
distilled or de-mineralized water will help prevent buildup and require less
frequent cleaning. Do the following to clean:
1. Push the foot press button.
2. Turn the unit o󰀨 and unplug the Power Cord.
3. Wait for the unit to cool completely (at least 30 minutes).
4. Remove the steam hose and the telescopic pole, and set them aside.
5. Carry the unit to a sink or tub.
6. Remove and drain the water tank. Rinse with fresh water and drain
completely.
7. Tilt upside down to facilitate removal of all water.
8. Flush the unit by lling the water reservoir and the hose base with fresh
water and draining completely.
9. Place the water tank back on the water reservoir.
10. Reattach the telescopic pole and steam hose.
11. Follow steps 3-6 of the Quick Storage procedure on the previous page.
12. If the unit surface is dirty, we recommend using a dry cotton cloth with
some 30% alcohol solution to cleaning.
7 8

10 11
PROBLEM SOLVING GUIDE
PROBLEM CAUSE SOLUTION
The unit fails to steam.
The light on the on/
o󰀨 switch does not
illuminate.
1. Steamer is not
plugged in.
2. Water tank is
empty.
3. There may be
mineral buildup.
1. Plug into electrical
outlet.
2. Fill water tank
3. Follow procedure
on the next page
The unit fails to steam.
The light on the on/o󰀨
switch does illuminate.
Mineral buildup in the
unit.
The water tank is empty
Follow the Removing
Mineral Buildup
Procedure in this manual.
Rell the Water Fill Tank
using the procedures in
this manual.
Water drips from nozzle Condensation in hose Extend the hose
vertically to allow water
to drain back into the
water reservoir.
Excessive gurgling of
hose and steam nozzle
Condensation in hose Some gurgling is a
natural e󰀨ect of the
steaming process. For
excessive gurgling,
extend the hose vertically
to allow water to drain
back into the water
reservoir.
Steam is intermittent Mineral Buildup in the
unit
It is normal for the unit
to periodically stop
steaming for a few
seconds. If the steam
stays o󰀨 for longer
periods, follow the
procedure on the next
page.
REMOVING MINERAL BUILDUP
One common problem with steamers is mineral buildup caused by the high
mineral content often found in tap water. Mineral residue inside of the internal
pipes and heater can cause intermittent steaming or, in some cases, no
steaming at all.
NOTE: To reduce or eliminate mineral buildup we recommend the use
of de-mineralized or distilled water in the unit.
The procedure below can be used to reduce mineral buildup. If you are
unable to use de-mineralized or distilled water, we recommend you follow this
procedure monthly.
1. Turn the unit o󰀨 and unplug the power cord.
2. Remove the steam hose and telescopic pole from the unit.
3. Drain the water reservoir by following steps 1-7 of the Cleaning and Long-
Term Storage procedure on Page 7. Leave the water tank o󰀨 the unit.
4. Mix a solution of 50% vinegar and 50% water. In most cases, 2 cups of
this solution will be su󰀩cient.
5. Slowly pour the water-vinegar solution into the hose base connector as
shown in Figure 6.
6. Continue pouring the solution into the hose base until the solution
appears near the top of the hose base. Pour additional solution into the
water reservoir until it is about half full.
7. Let sit for 40 minutes.
8. Drain the solution from the water
reservoir allowing the liquid to
drain into a sink or tub.
9. Drain the solution out of the
hose base by tilting the unit over
a sink or tub and pouring the
water out of the hose base.
10. Pour clean water in the hose
base and water tank and drain.
11. Repeat this step until the
vinegar smell dissipates.
12. Reassemble the unit and
operate normally.
9 10

12
.
PRODUCT SPECIFICATIONS
Base Dimensions 13.7 in x 8.9 in x 11 in
Total Height 4 ft, 6 in
Weight 9 lbs, 9 oz
Water Tank Capacity 2L
Heat Up Time 45 seconds
Steam Time up to 60 minutes per tank rell on Level 4
Steam Hose Length 5-ft cloth-covered hose
Input 120V 60Hz 1500w (on high)
Power Cord Length 7 ft
WARRANTY INFORMATION
PureSteam Pro comes with an industry-leading 5 Year Warranty that begins on
the date of purchase.
The warranty applies to the garment steamer and necessary parts and labor
relating thereto. The warranty does not apply to damage resulting from
failure to follow the operating instructions, accidents, abuse, alterations, or
disassembly by unauthorized individuals.
PRODUCT REGISTRATION
To ensure your full warranty, and to receive product updates and streamlined
customer support, remember to register your product at:
www.pureenrichment.com/productregistration
ARE YOU 100% SATISFIED?
If you have product questions or concerns, don’t hesitate to contact us directly
at:
[email protected]
Pure Enrichment has an award-winning warranty, exchange, and customer
service program that guarantees hassle-free solutions to any issue you might
have within 24 hours!
11 12

14
Santa Ana, CA 92705
www.pureenrichment.com