PureLink PT-MA-HD44-QV User manual

User Manual | Benutzerhandbuch
PT-MA-HD44-QV
4x4 MultiView HDMI Matrix

2
ENGLISH
CONTENT | INHALT
English
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Specication. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Package contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Connection diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Mode overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
1. Parts and push buttons. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2. Display mode menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
3. Keyboard hotkeys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
4. IR remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
5. RS232 Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Mode descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Technical Support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
FCC / CE Statements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Deutsch
Einleitung . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Funktionen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Spezikationen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Lieferumfang . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Anschlussplan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Modus Übersicht . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Betrieb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
1. Teile und Tasten . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
2. Display Modus Menü . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
3. Tastaturkürzel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
4. IR Fernbedienung . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
5. RS232 Steuerung . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Modus Beschreibungen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Technischer Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
FCC / CE Erklärung . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

3
ENGLISH
INTRODUCTION
PT-MA-HD44-QV 4 x 4 MultiView HDMI Matrix is the only completely independent HDMI
system that can arrange four HDMI multimedia sources and dynamically exhibit them on 4
displays in various modes. Each source can be independently scaled and instantaneously
switched without delays or black screens. It is the ideal solution for A/V Switching, Splitting,
or Broadcasting.
FEATURES
• Completely independent video wall Quad view system with 6 video modes
 andupto8usercongurablepresets.
• Smooth dynamic scaling of up to 4 inputs
• Select any input to be displayed on up to 4 monitors
• Change mode and scaling with no delays
• Intuitive mode operation by front panel Push Buttons, OSD (keyboard / mouse),
IR Remote Control or RS232
• The system can support digital video resolutions up to FullHD (1080p)
or WUXGA (1920 x 1200). With 4 screens, a total of 4K / UltraHD video resolution
is possible
• Supports locking HDMI cables
• Sturdy metal rack-mountable casing designed for 1U application
• Zoom in / out and picture-crop functions
• Advanced RS232 commands
• Drag and Drop feature to easily arrange all windows

4
ENGLISH
SPECIFICATION
PACKAGE CONTENTS
• 1x PT-HD44-VQ
• 1x Power adapter
• 1x User manual
• 1x IR extender
• 1x RS-232 cable
MODEL NO. PT-MA-HD44-QV
Video In 4x HDMI Type A Female (Lockable)
Video Out 4x HDMI Type A Female (Lockable)
RS232 1x DB9, Female
IR 1x Receiver and 1x IR Extender (3.5mm Earphone Jack)
Switch / Button 24x Momentary Switch
1x 2 Position Power Switch
Video Resolution FullHD (1080p) or WUXGA (1920 x 1200)
Operation Temperature 0° ~ 40°C
Storage Temperature -20°C ~ 60°C
Humidity 0 ~ 90% RH, Non-condensing
Weight 2.1 kg
Dimension (L x W x H) 437 x 205 x 43mm
Housing Metal enclosure
Power Adapter DC 12V
Safety / Emission FCC, CE

5
ENGLISH
CONNECTION DIAGRAM
The diagram illustrated here is an example, the actual application may vary. All illustrated
computer, accessories and monitors are not included in the package, it is for reference only.
Make sure all the devices and peripherals are connected appropriately before using this
unit.
MODE OVERVIEW
ABCD
Power adapter
Mouse Keyboard
IR Extender
Video source 1
Video source 2
Video source 3
Video source 4
Matrix mode PIP mode Windows mode
Video wall mode
PAP mode Quadview mode
or

6
ENGLISH
OPERATION
Various control methods are available from this unit, select your preferred method from the
list below:
1.Push buttons
2.On-screen-display via mouse and keyboard
3.IR remote control
4.RS-232 control
1. PARTS AND PUSH BUTTONS
NO. ITEM DESCRIPTION
1 LED indicators Indicates the status of each display. For example, if the LEDs are illuminated with 3 and C, this means that
monitor C is playing back the source from No.3 input.
2 INPUT Choose the desired source from 1~4, and then press the corresponding button. For more details, refer to the
chapter of Mode descriptions.
3 OUTPUT Choose the desired display from A~D, and then press the corresponding button. For more details, refer to
the chapter of Mode descriptions.
4 Recall RecallthecustomizedsettingconguredfromSETbutton.Presstolightupthebuttons(1~4andA~D),and
then select the desired setting to recall.
5 SET*
Save the customized input and output up to 8 settings.
1. Select a desired mode by pressing MATRIX / PIP / WINOWS / VIDEO WALL / PAP / QUADVIEW button.
2. Set a preferred input source (1~4) and ourtput display (A~D).
3.PressSETbutton,thenalltheinputbuttons(1~4)andoutput(A~D)willash..
4. Press a preferred button (1~4 and A~D) to save the setting to the memory of unit.
6
MATRIX
PIP
WINOWS
VIDEO WALL
PAP
QUADVIEW
Select the desired mode you wish to display, and the pressed button will be illuminated.
7 Exit / Lock Press to Exit the OSD menu.
Press to lock all the buttons on the unit. To unlock these buttons, press it again.
8 Menu / Select Press to bring up the OSD menu.
Select a desired option from the menu.
9
Cusor buttons Press to navigate the OSD menu.
10 IR receiver Receive the signals from bundled remote control.
11 Reset pin hole Use a paperclip to reset this unit if necessary.
Front panel

7
ENGLISH
* Firmware update
Toupdatethermware,pleasefollowthestepsbelow:
1.Pressthepowerswitchtoturnothepower.
2. Press and hold the SET button, then turn the power switch to on. The SET button will blink
rapidly.
3. Plug the USB cable into the USB Type B socket.
4. Run the upgrade utility from the PC
5.Clickthefolderbuttontoselectthelatestrmwarele
6. Click the upgrade button
7. Once the upgrade has been completed, a reminder message will appear on the screen
and the SET button will stop blinking.
Pleasecontactlocaldealerordistributorifyouhabetroubleupdatingthermware.
NO. ITEM DESCRIPTION
12 2-position
power switch Presstopoweron/otheunit.
13 Power jack Connect to the power adapter (DC 12V)
14 USB Type A
receptacles Connect to USB keyboard and mouse.
15 RS-232
connector Connect to a computer or RS-232 device.
16 USB Type B
receptacles Connecttoacomputerforupdatingmware*.
17 HDMI OUT
A~D Connect to HDMI displays.
18 HDMI IN
1~4 Connect to HDMI source devices.
19 IR EXT Input for IR extension (3.5mm jack)
Rear panel

8
ENGLISH
2. DISPLAY MODE MENU
The display mode menu is a unique way of controllling the device using a mouse. Please
follow the steps below to select a desired mode, input and output.
1.Simply click the mouse wheel anywhere on the screen to bring up the display mode
menu.
2.Point at the preferred mode to bring up the drop down
menu. The selected mode will be highlighted in red, and
the corresponding options will be shown on the drop
down menu.
3.Left click to tick the desired option or left click again to
 cancel.InWindowsmode,leftclicktoturnonorothe
windows.
4.To exit the display mode menu, press the mouse wheel
again.
Matrix
Example: Windows mode
PIP Windows Video wall PAP Quadview
3
4
1
2
COMMAND HOTKEYS DESCRIPTION
Menu / Select Enter Press to bring up the OSD menu.
Select a desired option on the menu.
Up / Down / Left / Right 
Cusor buttons Press to move the cursor up, down, left and right on the menu.
Exit Esc Press to exit the OSD menu.
Mode selection F1 ~ F6
Press to switch a preferred mode.
F1
Matrix
F2
PIP
F3
Windows
F4
Video wall
F5
PAP
F6
Quadview
Matrix 1~4, A~D
Press to switch to Matrix mode.
The hotkey for Matrix mode is consists of 2 keystrokes.
For example, to monitor source 2 on display B, you can press 2 and then press B.
PIP 1~4 / ALT Toswitchbetweendierentsubordinatedisplays,pressALT+1~4.
Windows 1~4 / ALT Press to display the source on top layer.
Toturnon/othesourcedisplay,pressALT+1~4.
Video wall 1~4. Select the desired source.
PAP 1~4. Select the source to playback on the main display.
Quadview 1~4. Select the desired source.
3. KEYBOARD HOTKEYS

9
ENGLISH
4. IR REMOTE CONTROL
5. RS232 CONTROL
1.Connect PT-MA-HD44-QV to a PC using an RS232 cable.
2.Open Hyper Terminal and create a new connection.
ProgramAccessoriesCommunicationsHyper TerminalNew Connection
NO. ITEM DESCRIPTION
1 INPUT Press to select the desired source.
2 OUTPUT Press to select the desired display.
3 Recall Recall the customized setting. Press to light up the buttons (1~4
and A~D) of unit, and then select the preferred mode to recall.
4
Cusor buttons Press to move the cursor up, down, left and right on the menu.
5 Exit Press to exit the OSD menu.
6
MATRIX
PIP
WINOWS
VIDEO WALL
PAP
QUADVIEW
Select the desired mode you wish to display.
7 Set
Saveacustomizedsettinginupto8seperateuserdenedpresets.
1. Select the desired mode by pressing the
MATRIX/PIP/WINDOWS/VIDEO WALL/PAP/QUADVIEW button.
2. Set your preferred input source (1~4 ) and output display (A~D).
3. Press SET button, then all the buttons of input (1~4) and output
(A~D)ontheunitwillash.
4. Press your preferred button(1~4 and A~D) to save the setting
to memory
8 Select Select a desired option on the menu.

10
ENGLISH
3.Enter a preferred name, and then click OK.
4.SelectConnectusingtoCOM+X
(X is the port which connected to
PT-MA-HD44-QV).
5.Enter the following data to each option,
then press ApplyOK.
Bits per second: 115200
Date bits: 8
Parity: None
Stop bits: 1
Flow control: None