Pursonic TW 350 User manual

TW 350 Towel Warmer Rack
Operating Instructions
Thank you for choosing our TW350 Electric Towel Warmer Rack.
Designed as a wall mounting unit,this towel warmer can be used in your bathroom, will add
Included in this document are all necessary installation and operation instruction. Please keep it for
future reference to avoid damage or danger caused by improper use.
comfort to your lifestyle as you wrap your body in a warm towel .
3 Years limited Warranty Parts and Labor
PURSONIC warrants this product to be free of defects in material and workmanship for a period of three years covering parts
and Labor from the date of original purchase.To obtain repair or replacement within the terms of this warranty, please
return the product with proof of warranty coverage ( copy of receipt), description of defect, transportation prepaid to:
160West 28th St
NEWYORK, NY 10001
This warranty does not apply to any products that has been damaged through alteration, mishandling, misuse or
negligence. The extent of PURSONIC's liability under this warranty is limited to the repair or replacement provided above
and in no event shall the company's liability exceed the purchase price paid by the purchaser for the product.This
warranty gives you specific legal rights and you may also have other rights which vary from state to state.
A minimum of $10 will be charged for any repair service beyond 3 years from the date of original purchase.Also a $10
money order made payable to PURSONIC must be included to cover return shipping and handling charges.
For customer service in the US please call 212-414-1798 [email protected] www.pursonicusa.com
A
Distributed by SAMSONIC, New York, NY 10001 USA
Disposal
Please respect the enviroment!
Dispose of the packaging according to the local garbage regulations.
Dispose of paper and carton separately from plastic bags into the corresponding containers.
Dispose of the unit at the end of its lifespan according to environmental considerations.
7.Once securely attached to the wall,the unit can be plugged into an electric outlet and your TW350 electric
towel warmer is ready for use.
5.Drill pilot holes A,B,C,D through the marks you made on the wall.Push the supplied wall anchor(5)into the
holes.If necessary use a hammer to ensure they are properly placed into the wall.
Insert long screw(2) through bush(4),then screw into wall anchor(5).
6.Install wall bracket(1) onto the bush(4),then tighten the set screw(1)into the hole of the bracket(1) by
hexagonal spanner.
3 Months

Technical Specification
120V,60Hz,80W
Safety Cautions
Read This Instruction Manual Carefully Prior to Operating The Unit
1) Electric towel warmer is designed to warm towels and bathrobes only and should not be used
for any other purpose.
2) Never stand, sit on or hang on the electric towel warmer.
3) Never allow children to play on or with the electric towel warmer.
4) To provide continued protection against risk of electric shock, connect to properly grounded
outlets.
5) All wiring must be performed by a licensed professional who is certified to do electrical
wiring.
6) Never place your electric towel warmer inside a shower, sauna or steamroom. Do not allow
electrical cord to sit in water. If the electric towel warmer falls into water, immediately unplug it.
Do not reach into water.
7) This product is intended for domestic use only.
8) This product is for indoor use only.
9) Hot surface.Avoid sustained contact.
10) To avoid a hazard,this product MUST NOT be used to hold towels or any other articles that
have been in contact with oil or petroleum based on products.
11) Silk fabrics MUST NOT be put on the unit.
12) Electric towel warmer is cULus listed for use in US and Canadian markets.
Cleaning
Clean the electric towel warmer with a soft, non-abrasive, damp cloth. Do not use abrasive
cleaning powders, metal polish or chlorine based cleaners on any part of the electric towel
warmer.
Installation
Tools
1.4pcs square or round wall bracket+4pcs set screw.One wall bracket with “U” groove.
2.Long screw
3.Short screw
4.4pcs bush
5.4pcs wall anchor
6.Hexagonal angle spanner
Accessories
4.
1. 2.
5.
3.
6.
1.Drill the short screw(3) through the wall bracket(1) and tighten to fix the wall bracket(1) onto the vertical tube.
Fix three wall brackets(1) by repeating the step.
Please take note when installing the fourth wall bracket, twist the screw off the hole beside the power cord,drill
the short screw through the “U” groove wall bracket and fix.
2.Measure the product size and distance between the screw holes of four wall brackets(1).
3.Use a light pencil to mark the location of the screwholes on the wall.Suggest it is installed at least 700mm
above floor level.
4.With the wall bracket(1)now firmly attached,hold the electric towel warmer agaist the wall in the location where
you would like it to be installed.Use a tape to ensure the unit are leveled and upright.