
SPECIAL ATTENTION
Please keep the towels a little moist and wet when inserting them in the
towel warmer. Please do not insert towels that are too wet where water
can drip from the towels.
We recommend keeping the towels 1 inch apart from each other when
inserting them in the unit.
Before turning on the UV light please keep the door closed.
Please power off the UV light before opening the door.
Thank you for choosing Pursonic Towel Warmer.
ATTENTION
Earth line is required with power plug.
Warming time varies depending on temperature
of the room.
Clean the water in the drip tray as needed.
Professional person is required for UV lamp repair.
Unplug unit immediately if abnormal condition occurs during use,
such as abnormal noise, smell, temperature rising, smoking, etc.
Professional person is required for repair.
This product is not designed for children.
Professional person is required for power cord repair.
Earthen line
Phase line
Neutral line
SPECIFICATION
TW100 TW200
INSTALLATION
Placed the product on an even surface of table or platform
FEATURES
Fashionable design with plastic door, suitable handle.
aluminum chamber with stainless steel rack;
Painted cabinet
Separate temperature control
Independent UV lamp control switch. UV lamp shuts off once the door is open.
USER GUIDE
While the unit is plugged in, insert the towels on the rack and then close the
door.
Press the ON button, the indicator light will then turn on, and press the UV
lamp switch at the rear of the unit to power on the UV function for warming
the towels with the UV ray sterilization.
The UV light does not need to be turned on if your primary function is just
to warm up the towels.
UV lamp will turn off once the door is opened, but will turn on again when
the door is closed.
Press OFF position, light goes off, the product stops working.
Heating Chamber