PYD Life Mini User manual

USER MANUAL
CEHP0203-LBN
Craft Express
Heat Press
Mini
www.pydlife.com
Wesite:
[phone]
Mob/WhatsApp:
Rm 4409, No. 372,
Huanshi Dong Road,
Yuexiu District,
Guangzhou, 510060,
China
Office:
[email protected]om
E-mail:

Mini Craft Express Heat PressMini Craft Express Heat Press
1 2
www.pydlife.com
www.pydlife.com
SAFETY INSTRUCTIONS
To avoid injury or death caused by electric shock, please read all the
instructions before using the machine.
1. Keep the machine unplugged when moving it;
2. Keep the machine unplugged when installing accessories;
3. Use the machine on a flat and stable table in a ventilated room;
4. Wear heat-resistant gloves when using the machine;
5. Do not use the machine in a hazardous place;
6. Do not use the machine when it can’t function properly;
7. Do not disassemble and reassemble the machine without special guidance;
8. Do not plug the machine in unsuitable AC outlet;
9. Do not touch the heating platen when the machine is heating up;
10. This machine is not intended for use by people (including children) who lack of
physical or sensory capability, experience and knowledge, unless they have been
given supervision and guidance by a person responsible for their safety;
11. Children should use the machine under the supervision of adults responsible for
their safety;
PRODUCT STRUCTURE
Safety Base
Easy-grip Handle
Control Buttons
Display Screen
Accurate Tip
(Press & Heat Evenly)

Mini Craft Express Heat PressMini Craft Express Heat Press
3 4
www.pydlife.com
www.pydlife.com
SPECIFICATION
Printing Parameter
Model Rated Voltage Rated Frequency Rated Power
CEHP0203-LBN-220 220V 50hz 300w
CEHP0203-LBN-110 120V 60hz 150w
Max. Printable Area 3.5*2.3in (9*5.8cm)
Material Plastic / Alloy
Time: 65 seconds
Temp.: 165℃ /329 ℉
The parameters above are for reference only, please adjust
the settings according to your own products.
Time: 30 seconds
Temp.: 210℃ /410 ℉
Vinyl Film Sublimation Paper
POWER ON / OFF
Long press for 3 seconds to power on.
Long press for 3 seconds to power off.
1. Press once to start countdown.
2. Press once again to stop countdown.

Mini Craft Express Heat PressMini Craft Express Heat Press
5 6
www.pydlife.com
www.pydlife.com
TIME SETTING (SIMPLE MODE)
In simple mode, the time range is 10-120 seconds and
the values are fixed. You can only adjust up or down
by 5 seconds.
IN SIMPLE MODE
PROMPT
1. Press time button to enter time setting;
2. Now the time button can be used as “+” button, and the
temp. button can be used as “-“ button. Press the two
buttons to adjust time;
3. The value will blink for four times and be set automatically.
TIME SETTING (ADVANCED MODE)
In advanced mode, the time range is 10-999 seconds.
You can set any value.
1. To enter advanced time setting, long press the time
button for 5 seconds when the machine is off, and the
screen will display “OFF”;
2. Turn on the machine, press time button to enter time
setting, set the time according to the steps on the
previous page;
3. To switch to simple mode, turn off the machine, long
press the time button for 5 seconds until the screen
display “ON”.

Mini Craft Express Heat PressMini Craft Express Heat Press
7 8
www.pydlife.com
www.pydlife.com
TEMP. SETTING (SIMPLE MODE)
In simple mode, there are four levels of
temperature options to choose from.
Level 1: 140℃ (284 ℉ )
Level 2: 165℃ (329 ℉ )
Level 3: 185℃ (365 ℉ )
Level 4: 210℃ (410 ℉ )
1. Press temp. button to enter temp. setting;
2. Now the time button can be used as “+” button, and the
temp. button can be used as “-“ button. Press the two
buttons to adjust temperature;
3. The value will blink for four times and be set automatically.
TEMP. SETTING (ADVANCED MODE)
In advanced mode, the temp. range is
60-210℃(140-410 ℉ ). You can set
any value.
1. To enter advanced temp. setting, long press the temp. button
for 5 seconds when the machine is off, and the screen will
display “OFF”;
2. Turn on the machine, press temp. button to enter time
setting, set the temperature according to the steps on the
previous page;
3. To switch to simple mode, turn off the machine, long press
the temp. button for 5 seconds until the screen display “ON”.

Mini Craft Express Heat PressMini Craft Express Heat Press
9 10
www.pydlife.com
www.pydlife.com
SWITCH TEMP. UNIT
1. Turn off the machine;
2. Long press the time and the temp. buttons together for 3 seconds to switch between
℃ and ℉ .
PLACEMENT & STORAGE
PLACEMENT
After printing, the machine will remain at a high temperature. Please
put it back on the safety base and do not touch its bottom.
A.Mini Craft Express Heat Press
B.Safety Base
STORAGE
1. Turn off and unplug the machine,
wait until it cools down completely;
2. Put it into the original box, and store
it in a dry and cool place.
Be careful! Avoid direct touch on heat platen!