Pyle PTA24BT User manual

PTA24BT-PTA62BT
CompactWirelessBTHomeAudioAmplifier
Questions? Issues?
We are here to help!
Phone: [phone]
Email: suppor[email protected]

FOREWORD
Your New Pyle Amplier gives you the power and versatility you
need in a professional sound system. The amplier's wide frequency
response makes it suitable for amplifying music or vocal program
material. It can be used in meeting halls, house, restaurant, schools,
stores, or for paging systems.
Please read this manual thoroughly before you attempt to set up and
use the amplier. It contains a range of installation suggestions as well
as instructions to ensure safe usage.
Installed properly, you can expect years of trouble-free service from
this product.
FEATURES AND CONTROLS
FRONT PANEL
PTA24BT
PTA62BT
BACK PANEL
PTA24BT
www.PyleUSA.com
2
www.PyleUSA.com
3

• SINGLE: Repeat the track that was current playing.
13. Blue LED DIsplay WIndow for MP3/Bluetooth Function
14. Headphone Control
• 3.5mm headphone input jack with independent rotary volume control.
15. Line Input AUX/CD IN
• Connect the MP3 Device (player) sources such as PC (CD ROM),
laptop, walkman, iPod and mobile phone
16. Microphone Talk-Over
• Switch-activated function allows for direct audio integration with
connected microphone (MIC1).
17. AC IN Power Cord: Connect to AC 110V/60Hz or 220V/50Hz
18. Push Type Speaker L/R Terminals
• Connect the speaker wires directly to the amplier
19. Stereo Subwoofer Output
• Connect to subwoofer system from these terminals
20. Stereo Recording Function Output
21. RCA L/R LINE Input: Connect to desired LINE input sources.
22. 110V/220V Switch
• According to power voltage, push this button to the 110V or 220V
correct station.
23. Wireless BT Antenna: Wireless BT Streaming receiver
REMOTE CONTROL FUNCTION
1. Press this button to turn ON or OFF the MP3
2. When in the FM mode, press this two buttons
to select previous or next channel.
3. Press these two buttons to select the previous
or next track in USB or SD or Wireless BT mode
4. Volume up or down
5. Press the numbers to select the tracks directly.
The unit takes 1-2 seconds to response in USB
or SD mode.
6. Press this button to repeat mode.
7. Press this button to select the playing mode,
such as USB/SD/FM/WIRELESS BT
8. EQ function: Select a pre-set mode of the
equalizer that is designed accordingly.
9. Play and Pause function for MP3
www.PyleUSA.com
4
www.PyleUSA.com
5
PTA62BT
1. Main Power ON Switch
• Switch ON or OFF The amplier by using this switch.
2. ECHO CONTROL
• Turn the knob to adjust the MIC echo level.
3. MIC 1 VOL & MIC 2 VOL
• Turn the knob clockwise to increase the MIC volume.
4. MIC 1 & MIC 2 Input Jack
• KARAOKE MIC connected to these jacks.
5/6. BASS AND TREBLE TONE CONTROL
• Lets you boost or attenuate bass and treble for the desired sound.
7. Master Volume
• Adjusts main audio system volume level.
8. Audio Source Switch
• Audio Source Switches between AUX1 input, AUX2 input,
BT/FM/USB/SD
9. Independent Channel Volume Controls
• Adjusts audio volume levels for connected input(s).
10. SD/MMC Socket for playing SD/MMC cards
11. USB Charge Port & USB Reader Function
• USB port for smartphone charging and USB reader function.
12. Buttons for Wireless BT/MP3 (USB and SD) Function Control
• MODE Button: For audio selection like WIRELESS BT/USB/SD/LINE IN
• PLAY/PAUSE BUTTON: Play and Pause control button
• PREV/NEXT: Quick backward or next song
• STOP BUTTON: This button allows you to STOP the music
• REPEAT BUTTON: This button allows you to play the music in
repeat mode (All or Single mode)
• ALL: All tracks in the USB or SD CARD will be repeated in order
without interruption.
1
2
3
4
5
6
7
8
9

IMPORTANT
Replacing a fuse
This amplier requires fuse with the proper rating for protection from
power surges and short circuits. If the amplier suddenly turns o or
would not turn on, the fuse is properly blown.
• Let the amplier cool down and see if it starts again before you
assume a fuse needs to be replaced.
• Unplug the amplier from the AC outlet.
• Turn the fuse holder cap and pull out the cap.
• Remove the old fuse and replace it with an identical one.
CAUTION: Never use a fuse with a higher rating
WIRELESS BT STREAMING OPERATION INSTRUCTION
External devices which have a built-in BT feature can be connected
to this amplier wirelessly to play through the amplier's speakers.
If your amp is connected to speakers, you will hear audible tones
which will help for connecting.
1. At rst be sure that the amplier is powered on, and turn the
volume to low. Please remember to connect the BT Antenna at the
back panel for better receiving signal.
2. Press the Model button switch in on the front panel, choose into
Wireless BT mode, and then the unit is automatically ready to pair
with your external device.
3. Turn ON the Wireless BT of your external device.
4. Search for available BT devices and make sure to be within range of
your amp, and wait for your device to select "PYLEUSA" on the
pairing devices lists of BT networks.
5. Once connected you will hear a beep which means the BT pairing is
successful and connected.
6. You can now play music on your external device through the
amplier.
CARING FOR YOUR PYLE AMPLIFIER
Your Pyle Amplier is an example of superior design and
craftsmanship.The following suggestions will help you care for your
amplier so you can enjoy years of use:
• Keep the amplier dry. If it gets wet, wipe immediately.
• Use the amplier only in well-ventilated installations.
• Handle the amplier away from dust and dirt.
• Wipe occasionally with a damp cloth to keep it looking new.
Do not use harsh chemical, solvents or detergents!
www.PyleUSA.com
6
www.PyleUSA.com
7

www.PyleUSA.com
8
www.PyleUSA.com
9
NO POWER The fuse might be blown Check the amplier's fuse
and replace it if necessary.
NO SOUND
Sound source or speakers
may not be connected
properly
Check all connections
Master volume control
may be set to a minimum
Adjust the volume control
to a higher setting
The speaker's wire
might have the wrong
impedance
Make sure that the speakers
that you have connected to
the amp are matching in
impedance
The amplier is shutting
down or powering o
Turn the amplier o and let it
cool, make sure that the
amplier is properly ventilated,
and then tum it back on
Feedback Microphone and speakers
are to close together
Reposition the microphone
and speakers
TROUBLESHOOTING
PTA24BT
Compact Wireless BT Home Audio Amplier
2-Ch. Audio Source Stereo Receiver System with FM Radio,
MP3/USB/SD/AUX Playback (250 Watt)
Features:
• 2-Ch. Compact Stereo Amplier System
• Wireless BT Audio Streaming Receiver
• FM Radio Tuner with Digital LED Display
• Front Panel Button Control Center
• Audio Source Input Mode Selector
• Connect & Playback Audio from External Devices
• Headphone Jack with Independent Volume Control
• (2) 1/4'' Microphone Input Jacks
• Built-in Microphone Talk-Over Function (MIC1)
• MP3 Digital Audio File Support
• USB Flash Drive & SD Memory Card Readers
• USB Port Doubles as Device Charge Port
• Push-Type Speaker Connectors
• Aux (3.5mm) Input Jack
• REC + Subwoofer Output RCA (L/R) Connectors
• Audio Input RCA (L/R) Connectors
• Short Circuit & Over Voltage Protection
• Audio Conguration Settings: Treble, Bass, Master Volume, Echo,
Mic Volume
• Convenient Audio Source Control for Home or Office Use
What’s in the Box:
• Stereo Amplier System • Remote Control
Wireless BT Connectivity:
• Simple & Hassle-Free Pairing
• Instant Wireless Audio Streaming Ability
• Works with All of Today’s Latest Wireless BT Devices
(IPhone, Android, Smartphone, iPad Tablet PC, etc.)
• Wireless BT Network Name: ‘PYLEUSA’
• Wireless BT Version: 4.0
• Wireless Range: Up to 30’+ ft.
Technical Specs:
• Power Output: 250 Watt MAX
• Amplier Design: 2-Channel
• Impedance: 4-8 Ohms
• Frequency Response: 20Hz - 20KHz
• Signal to Noise Ratio: >81dB
• T.H.D.: <0.3%
• Headphone Jack, 3.5mm
• Radio Station Memory: 30 Station Presets
• Digital File-type Compatibility: MP3, WMA
• Maximum USB/SD Flash Support: Up to 32GB
• Power Supply: 110/220V, Switchable
• Dimensions (L x W x H): 9.8'' x 7.5'' x 3.8'' –inches

www.PyleUSA.com
10
www.PyleUSA.com
11
This product can expose you to a chemical or group of checmicals, which may include
“Nickel Carbonate” which is known in the state of California to cause cancer, birth defects,
or other reproductive harm. For more info, go to https://www.p65warnings.ca.gov/.
Wireless BT Connectivity:
• Simple & Hassle-Free Pairing
• Instant Wireless Audio Streaming Ability
• Works with All of Today’s Latest Wireless BT Devices
(iPhone, Android, Smartphone, iPad Tablet PC, etc.)
• Wireless BT Network Name: ‘PYLEUSA’
• Wireless BT Version: 4.0
• Wireless Range: Up to 30’+ ft.
Technical Specs:
• Power Output: 750 Watt MAX
• Amplier Design: 6-Channel
• Impedance: 4-8 Ohms
• Frequency Response: 20Hz - 20 KHz
• Signal to Noise Ratio: >81dB
• T.H.D.: <0.3%
• Headphone Jack, 3.5mm
• Radio Station Memory: 30 Station Presets
• Digital File-type Compatibility: MP3, WMA
• Maximum USB/SD Flash Support: Up to 64GB
• Power Supply: 110/220V, Switchable
• Dimensions (L x W x H): 13.8'' x 7.8'' x 3.8'' -inches
PTA62BT
Wireless BT Streaming Home Audio Amplier
6-Ch. Audio Source Stereo Receiver System with FM Radio,
MP3/USB/SD/AUX Playback (750 Watt)
Features:
• 6-Ch. Stereo Amplier System
• Wireless BT Audio Streaming Receiver
• FM Radio Tuner with Digital LCD Display
• Front Panel Button Control Center
• Audio Source Input Mode Selector
• Connect & Playback Audio from External Devices
• Headphone Jack with Independent Volume Control
• (2) 1/4'' Microphone Input Jacks
• Built-in Microphone Talk-Over Function (MIC1)
• MP3 Digital Audio File Support
• USB Flash Drive & SD Memory Card Readers
• USB Port Doubles as Device Charge Port
• Push-Type Speaker Connectors
• Aux (3.5mm) Input Jack
• REC + Subwoofer Output RCA (L/R) Connectors
• Audio Input RCA (L/R) Connectors
• Short Circuit & Over Voltage Protection
• Audio Conguration Settings: Treble, Bass, Master Volume, Echo,
Mic Volume
• Convenient Audio Source Control for Home or Office Use
What’s in the Box:
• Stereo Amplier System • Remote Control