Pyle PDWM2130 User manual

2 Channel Professional Wireless FM Microphone
PDWM2130
www.pyleaudio.com
Owner's Manual

The PDWM2130 was manufactured to be easy to use and still give you professional performance quality in
and FM wireless microphone.
Installation is so simple.
•Unscrew the bottom of the microphone to install two AA Batteries. Screw
the Battery cap back on.
•Plug your receiving unit into your mixer or amplifier with a 1/4" mono
microphone cord.
•Plug the receiving unit into your electrical wall outlet.
•Turn the receiver on by using the on/off switch located at the front of the
unit.
•There is a switch located on each of the two microphones that turns each
microphone on/off & mutes them individually.
•Your wireless microphone system is up and running.
WIRELESS MICROPHONE
Carrier Frequency: 109.00~113.00MHz
Tx output level: 10MW
S/N ratio: 75dB
Maximum deviation: 30KHz
Modulation mode: FM
Battery type: 3V
RECEIVER
Carrier Frequency: 109.00~113.00MHz.
RF Sensitivity: 20dB/
S/N ratio: 50dB
Frequency response : 50~15KHz
Audio output level: 10mV
Power: DC: 9 V, A C: 110V o r 2 2 0 V