Pyle PLMRM4BTA User manual

Wireless BTAmplifier
PLMRM4BTA
MarineWirelessBTStreamingAmplifierReceiver
Waterproof RatedAmpAudio Control Unit,
MP3/USB/AUX

www.PyleUSA.com 2
CONTENTS
Installation ........................................................................................................................... 3
Wiring Connection ............................................................................................................. 5
Location of Keys ................................................................................................................. 6
Operation .............................................................................................................................. 7
USB Play Operation ........................................................................................................... 7
BT Operation ........................................................................................................................ 8
Remote Control ................................................................................................................... 9
Troubleshooting .............................................................................................................. 11
Specication ...................................................................................................................... 12

www.PyleUSA.com
3
INSTALLATION
Notes:
• Choose the mounting location where the unit will not interfere with the
normal driving function of the driver.
• Before nally installing the unit, connect the wiring temporarily and make
sure it is all connected up properly and the unit and the system work
properly.
• Use only the parts included with the unit to ensure proper installation.
The use of unauthorized parts can cause malfunctions.
• Consult with your nearest dealer if installation requires the drilling of holes
or other modications of the vehicle.
• Install the unit where it does not get in the driver’s way and cannot injure the
passenger if there is a sudden stop, like an emergency stop.
• If installation angel exceeds 30°from horizontal, the unit might not give its
optimum performance.
• Avoid installing the unit where it would be subject to high temperature, such
as from direct sunlight, or from hot air, from the heater, or where it would be
subject to dust, dirt or excessive vibration.
30

www.PyleUSA.com 4
INSTALLATION
Mounting
Once a suitable location has been determined, drill the hole and secure the
stereo using the metal mounting bracket. If the bracket needs to be shortened,
remove the appropriate number of breakaway segments using a pair of pliers.
MOUNTING BRACKET
DASHBOARD
BREAK LINES

www.PyleUSA.com
5
WIRING CONNECTION
ISO CONNECTION

www.PyleUSA.com 6
Wireless BTAmplifier
1
2
3
4
5
OPERATION
LOCATION OF KEYS
Once a suitable location has been determined, drill the hole and secure the
stereo using the metal mounting bracket. If the bracket needs to be shortened,
remove the appropriate number of breakaway segments using a pair of pliers.
1. IR Window
2. Button/Mute Button
3. Vol+/ Button
4. Mode Button
5. Vol-/ Button

www.PyleUSA.com
7
OPERATION
TURN ON/OFF THE UNIT
Press button (2) to turn ON the unit. When the unit is on, press and hold button
(2) for 2 seconds to turn the unit OFF.
MUTE
When the unit is on. Shortly press MUTE button (2) to mute the audio output.
Press it again to recover output.
TURN UP/DOWN VOLUME
Press Vol+/ or Vol-/ button to turn up/down volume. Press and hold it for
turning it up/down volume continuously.
SELECTING FILES
Press and hold MODE button for 2 seconds. Then press or button Vol+/ or
Vol-/ to move to the next le or previous le. If both buttons have not been
pressed for several seconds. It will return to VOL mode.
MODE
Shortly press MODE button on the panel to change the source. Press and hold it
for 2 seconds. It change the VOL+/- button to / function. If both buttons
(/ ) have not been pressed for several seconds. It will return to VOL mode.
AUXILIARY INPUT
The unit can be connected a portable audio player through the AUX IN interface.
SLIGHT FOG AFTER OPERATION
Normal in colder weather. Allow unit to run for 1-2 hours. This will burn o
moisture.
USB PLAY OPERATION
On the back side of the unit, there is a USB interface. You can connect an USB
driver through this interface . When you connect an USB driver through the
interface, the unit will search the MP3/WMA les in the USB driver and start to
play automatically. If in other mode, you can also press MODE button on the
remote control to select USB mode. It supports the MP3/WMA le in the device.
SELECTING SONGS IN SINGLE STEP
Press button or button on the remote control to move to the following
song or the previous song. Press and hold button or button for 2 seconds
to fast forward or fast reverse. Song playing starts from when you release the
button.

www.PyleUSA.com 8
PAUSING PLAYING
Press 1 button on the remote control to pause playing. Press it again to
resume playing.
SELECTING SONGS BY BND BUTTON
In USB mode. Press AMS button on the remote control to active the le search
mode. In this moment enter desired song number and press SEL button to
conrm. It will play the song.
Note:
BAND: 7
: 8
: 9
BDISP: 0
SEL: Conrm
FOLDER+/- FUNCTION
When MP3/WMA playing. Press DIR+/- button on the remote control it will to
the next folder or back to the previous folder.
+10/-10 FUNCTION
When MP3/WMA playing. Press and hold +10/-10 button for 2 seconds on the
remote control it will skip to +10 /-10 songs to play.
CAUTION:
When there are important les in the USB Device, do not connect it to the main
unit to play, because any wrong operation may cause les loss. Our company
assumes no responsibility for this.
BLUETOOTH OPERATION
• PRE-PAIR FOR BLUETOOTH OPERATION
I. When use Bluetooth, please make sure the mobile phone supports
Bluetooth function.
II. For the dierent kind of mobile phone, Bluetooth emissive power has some
dierence. To get the best conversation quality, it is commended that the
distance between the mobile phone and the unit is within 3m. And please
don’t put any metal object or any obstacle between the path of the mobile
phone and the unit.

www.PyleUSA.com
9
• PAIRING
I. On the mobile phone, select the Bluetooth set up. (Please refer to the
instruction manual of your mobile phone on how to operate Bluetooth.)
II. “PyleUSA”appear in the list on your mobile phone, please select
“PyleUSA” input password “0000” if necessary if needed.
• Bluetooth Audio (A2DP function)
Press MODE key on the remote control till to the BT mode. Then turn ON the
music player of the mobile phone and playing a song. The sound will come
out from the speaker of the unit.
Press key on the remote control to pause/play the song. Press button
or button on the remote control to select next/previous song.
REMOTE CONTROL HANDSET

www.PyleUSA.com 10
FUNCTION KEY & CONTROL
1. Power ON/OFF Button.
2. VOL+ Volume up button.
3. BAND No function.
4. SEL In MP3/WMA searching mode press it for conrm function.
In MP3/WMA mode: Press it shortly for skip previous le.
Press and hold it for fast reverse.
6. EQ Press it to select desired audio equalization.
7. 1/ In MP3/WMA mode: Press to pause/resume playing.
8. 4/RDM In CD/MP3/WMA mode: turn on/o random function.
9. 6/+10/DIR+: In MP3/WMA mode: Press it to next folder.
Press and hold for 2 seconds for +10 function.
10. 5/-10/DIR-: In MP3/WMA mode: Press it back to previous folder.
Press and hold for 2 seconds for -10 function.
11. 3/RPT In CD/MP3/WMA mode: Press it turn on/o repeat function.
12. 2/INT In CD/MP3/WMA mode: Press it turn on/o INTRO function.
13. DISP In CD/MP3/WMA mode: when searching le it is 0 number.
14. VOL- Volume down button.
15. In MP3/WMA mode: Press it shortly for skip next le.
Press and hold it for fast forward.
16. AMS In MP3/WMA mode: it is song searching function.
17. Press to mute the sound. Press it again to recover the Sound.
18. MODE Press to change the source .

www.PyleUSA.com
11
TROUBLESHOOTING
Before going through the checklist, check wiring connection. If any of the
problems persist after checklist has been made. Consult your nearest service
dealer.
Symptom Cause Solution
No power
The car ignition
switch is not ON.
If the power supply is
connected to the car accessory
circuits, but the engine is not
moving, switch the ignition
key to “ACC”.
The fuse is blown. Replace the fuse.
Volume is in minimum Adjust volume to a
desired level.
No sound Wiring is not properly
connected. Check wiring connection

www.PyleUSA.com 12
PLMRM4BTA
Marine Bluetooth Amplier Receiver
Waterproof Rated Amp Audio Control Unit, MP3/USB/AUX
Features:
• Sound System Amp Receiver for Audio Control
• Built-in Bluetooth Receiver for Wireless Streaming
• Water Resistant Marine Grade Construction
• Universal Standard Size for Dashboard/Console Panel Installation
• Wired USB Flash Drive Reader
• MP3 Digital Audio File Playback
• Connect & Stream Audio from External Devices
• Aux RCA (L/R) Input Connectors
• Aux RCA (L/R) Audio Output Connectors
• Used for Boat, Automobile, O-Road, Mobile and Marine Watercraft Vehicles
Bluetooth Connectivity:
• Built-in Bluetooth for Wireless Audio Ability
• Works with All of Your Favorite Devices
(iPhone, Android, Smartphone, iPad, Tablet, etc.)
• Bluetooth Version: 2.1
• Bluetooth Wireless Range: 30’+ ft.
• Bluetooth Network Password: ‘0000’ (4 zeroes)
Technical Specs:
• MAX Power Output: 4 x 50 Watt
• Marine Grade Rating: IP-X5
• Frequency Response: 20Hz-20kHz (+/-3dB)
• Impedance: 4 Ohm
• S/N Ratio: 55dB
• Stereo Separation: >30dB, @ 1kHz
• Tone Control: Bass/Treble +/-10dB
• Maximum USB Flash Support: 32GB
• Digital Audio File Support: MP3/WMA
• Power: DC 12V
• Current Drain/Power Consumption: 10 Amp (Max.)
• Total Front Face Diameter: 4.0’’ -inches
• Cutout Diameter: 3.1’’ -inches
• Chassis Mounting Depth: 2.9’’ -inches
What’s in the Box:
• Bluetooth Amplier Receiver
• Power & Wiring Harnesses
• Remote Control

www.PyleUSA.com
13