Pyle PT694BT User manual

Hi-FiWirelessBTHomeTheaterReceiver
PT694BT
Surround Sound StereoAmplifier System
with 4K Ultra HD Support,AM/FM Radio (1000 Watt MAX)

www.PyleUSA.com
2www.PyleUSA.com 3
Safety Precautions
A. Avoid opening the cover or back panel. Do not open the
cover, x or touch the inner parts. No user-serviceable
parts inside, refer servicing to qualied service personnel.
B. Protect voltage line. Avoid high pressure and to be
stomped on, do not pull, push excessively.
C. Please put on this unit in the windy place, avoid direct
sunshine and nearing heater. Place the unit in a location
with adequate air circulation.
D. Do not interfere with its proper ventilation; this will cause
the internal temperature to rise and may result in a failure.
E. Avoid metals dropping in, like needle, hairpin, coin,
otherwise the unit will get short and out of work.
F. Be sure to set the line voltage AC230V/50Hz if you are not
sure of the type of power supply, consult your appliance
dealer or local power company.
For MAINS powered apparatus and for apparatus producing
internal voltages greater than 35V (peak) a.c. or d.c., having
no protection against splashing water according to annex A,
the instructions for use shall state that the apparatus shall not be exposed to
dripping or splashing and that no obiects lled with liquids, such as vases, shall be
placed on the apparatus
Front Panel
114 13
2 3 4 5 6 7 8 9 10 11 12
1. Power Switch
2. USB Input jack
3. DIGITAL INPUT KEY
Press DIGITAL INPUT key to
select COAXIAL/OPTICAL/
DIGITAL 1/DIGITAL 2/ DIGITAL 3/
and USB digital input.
4. ANALOG INPUT KEY
Press ANALOG INPUT key to select
BT/DVD/CD/AUX and FM analog input.
5/6/7. /CH- / /AUTO/ /CH+
Use these three keys to operate USB/BT
and Tuner functions.
a. In USB or Bluetooth channel, press
these three keys to nish previous/
play/pause and next functions.
b. In FM channel, press AUTO key for
broadcast stations auto-memory.
8. ARC
Rear Panel
9. CH. MODE
Press CH.MODE key to select dierent
channel mode.
10. MENU
Press MENU key and rotate VOLUME/
MULTI knob to adjust main channel
BALANCE/main channel TREBLE/
main channel BASS/surround
channel VOLUME/center channel
VOLUME and subwoofer channel
VOLUME.
11. OK MENU
When inserting the microphone,
press OK MENU key and rotate
VOLUME/MULTI knob to adjust
MIC VOLUME/MIC TREBLE/MIC
BASS/ECHO and DELAY.
12. MIC1/MIC2
Microphone input jacks.
13. VOLUME/MULTI
14. VFD display
110V~ 60Hz
1
2 3 4 5 6 7 8 9 10 11
12 13 14 15 16 17

www.PyleUSA.com
4www.PyleUSA.com 5
1. FM ANTENNA
2. CD/DVD AUDIO INPUT
3. AUX AUDIO INPUT
4. ACTIVE SUBWOOFER OUTPUT
5. PASSIVE SUBWOOFER OUTPUT
6. CENTER CHANNEL OUTPUT
7. SURROUND RIGHT CHANNEL OUTPUT
8. SURROUND LEFT CHANNEL OUTPUT
9. FRONT RIGHT CHANNEL OUTPUT
Remote Control Function Introduction
System Connection
10. FRONT LEFT CHANNEL OUTPUT
11. POWER SOCKET
12. COAXIAL INPUT
13. OPTICALINPUT
14. HDMI 1 INPUT
15. HDMI 2 INPUT
16. HDMI 3 INPUT
17. HDMI OUTPUT (WITH ARC)
1. Standby
2. Analog input
3. Digital input
4. Channel select
5. Dsp mode
6. Bass +
7. Treble +
8. Bass -
9. Center volume +
10. Left surround
Volume +
11. Right surround
volume -
12. Subwoofer volume -
13. Main volume +
14. Balance left
15. Bluetooth channel
16. ARC
17. USB/BT next
18. USB/BT previous
19. FM tuning +
20. FM tuning -
21. MIC volume +
22. MIC volume -
23. MIC echo +
24. MIC echo -
25. Mute
26. Loudness on
27. Loudness o
28. HiFi mode
29. Treble -
30. Reset
31. Right surround
volume +
32. Right surround
volume -
33. Center volume-
34. Subwoofervolume +
35. Balance right
36. Main volume -
37. AM/FM
38. USB/BT stop
39 USB/BT play/pause
40. FM channel -
41. FM channel +
42. FM auto
43. FM memory
44. MIC delay +
45. MIC echo -

www.PyleUSA.com
6www.PyleUSA.com 7
Operating Instructions
Preparation before operation
• This product must be placed on a at, solid object to ensure that it has sufficient
capacity to support the product without falling.
• Please use this product according to the safety requirements in front of this
manual and connect with other products (TV, speaker, DVD player or player) as
required.
• Open the audio source device connected to this product
• Press the power switch button on the panel to turn ON the power.
Operation
Channel Selection
The product has 11 pairs channels input, digital channel input and analog channel
input: Select HDMI 1-3, OPTICAL, COAXIAL and USB digital input by pressing digital
input button on the panel or remote control.
Select AUX, BT, DVD/CD and FM by pressing the 'analog input' button on the panel
or remote control.
Channel Mode
Press "channel mode", select2.1 or 5.1 channels on the panel or remote control
Volume Adjustment
Total volume adjustment:
Rotate the "VOLUME/MULTI" VOLUME/multi-function adjusting knob on the panel,
or press the 'total VOlUME +/-' button on the remote control to adjust the VOLUME.
Center, surround, heavy bass channel volume adjustment:
Press "main menu" on the panel, adjust the screen to show "CV xx", ''the SRV xx'',
''xx'' and ''SWVxx SLV'', then rotate the "MULTI' VOLUME/multifunctional adjustment
button on the panel, adjust the Volume of center channel, right surround channel,
left surround channel and the heavy bass channel.
Press the ''Center volume +/-'' surround volume +/-'' and ''heavy bass +/-'' button
on the remote control , adjust the volume of Center, surround and heavy bass.
Channel.
MAIN CHANNEL TONE AND BALANCE
Press the 'MENU' on the control panel of the receiver system. Adjust the display
'TRExx' 'BASSxx' and 'L-- //--R'. 'VOLUME/MULTI' is volume/Multi-function knob.
This knob can adjust main channel bass/Treble volume level and Left/Right channel
volume balance.
USB OPERATION
Press the 'Input' button on the remote control or on the control panel of the receiver
system. Select 'USB'mode. Then insert USB ash disk. This unit can automatically
play the USB ash disk le. Then press , , button to operate the corresponding
function. Supports WMA/MP3/APE/PLAC les
Note:
1. Because video les continuously updates, this product can't play all format les.
2. If USB ash disk doesn’t work on USB mode. The operation is invalid
MIC
• Insert MIC. The display will show 'OK ON'
• Press the 'OK MENU' on the control panel of the receiver system. Rotate 'VOLUME
/MULTI' knob. Adjust MIC volume. Press the 'MIC VOL+/-"MIC ECHO+/-"MIC DELAY
+/-" on the remote control. Adjust the microphone Master/echo/delay volume level.
HIFI
• In ANALOG INPUT mode, press the 'HIFI' button on the remote control.
Output is 2.0ch stereo audio mode.
HDMI
1. Connect audio equipment (Blu-ray DVD player, Set Top Box ) with HDMI output
by using HDMI cable.
2. Press the 'Digital input' on the remote control or on the control panel of the
receiver system. Select the appropriate channel.
3. Press the 'CH. MODE' on the remote control to change the channel of the
broadcast program.
4. HDMI with ARC function. Set the TV audio in 'External speaker' or 'Audio
system', press 'ARC ON' on remote control,. The display will show 'ARC on', This
amplier can play the TV audio. Press 'ARC o', The amplier goes back to default
channel.
Note: HDMI Version 1.4B. Support 3D 4K
Make sure the TV has ARC function and set the TV in ARC ON state.

www.PyleUSA.com
8www.PyleUSA.com 9
Wireless BT Function
1. The receiver connects to your Bluetooth-enabled device, allowing the system to
receive your wireless bluetooth signal and stream audio to any connected
speaker system.
2. Press the 'ANALOG INPUT' on the remote control or on the control panel of the
receiver system, then enter to 'BT' mode--as indicated on the display screen.
3. Ensure Bluetooth is activated on your device and search for bluetooth Network
Named: PYLEUSA
4. No password is required for connecting.
ARC (Audio Return Channel) Function
The ARC (Audio Return Channel) function makes it easy for the PT694BT to play
audio from any TV with a single HDMI cable. It can be adjusted either on the front
control panel or via the included remote control.
Enable your TV to send audio signal upstream to a connected speaker system or AV
receiver while eliminating additional cable connections and clutter from an optical
audio cable (S/PDIF). ARC audio transmission links your speaker output to your
television controls, meaning you do not need an external / additional remote or
interface to congure audio levels. Enjoy an optimal multimedia home theater
experience by connecting your television and Hi-Fi equipment into one, seamless
entertainment system.
FM RADIO
Press 'AUTO " TUNE+/-" CH+/-' button on the remote control. Operate automatic
search and save station, manually save and select the stored station function.
DSP Sound Field Control
Press 'DSP' or 'CH MODE' on the remote control. 7 dierent sound eld eects can
be selected. (LIVE/HALL/DISCO/CHURCH/ROCK/JAZZ/CLASS)
NOTE: Pressing those button on the digital input channel is invalid
LOUD
Press 'LOUD ON' on the remote contnol. The low frequency of this unit can be
increased appropriately at low volume. Then press 'LOUND OFF' to cancel this
function.
DISPLAY
Press 'DISPLAY' button on the remote conlrol to adjust dierent display mode.
RESET
Press 'RESET' button on the remote control to restore to the factory setting state.
MUTE
Press 'MUTE' button on the remote control to turn ON or OFF MUTE function.
STANDBY
Press 'STANDBY' button on the remote control to turn ON standby state.
Press again to cancel standby mode.
Troubleshooting
If you are still experiencing issues, please contact your authorised local dealer or
contact us on www.PyleUSA.com.
Problem Probable Cause Solution
No display The power socket is in poor
contact or without electricity
Check the power supply and plug
of the socket.
There’s display but
no sound output
1. The speaker wiring is wrong.
2. The playback source doesn’t
corresponds to the selected
signal state
3. The volume level is in lowest
output state.
4. MUTE is activated
1. Connect the speaker line
according to the wiring diagram
2. Select the input state which is
playing
3. Turn the main volume & adjust
the knob clockwise.
4. Disactivate MUTE
Remote control
doesn’t work
1. The remote transmitter window
is not aimed at the local
receiving window.
2. There are obstacles between
the unit and the remote control
3. Drained remote control batteries
1. Aim at the host receiving
window.
2. Remove obstacles
3. Replace new battery
Out of control Being disturbed or improperly
operated Turn it OFF and than turn it ON
sound distortion Main volume adjustment is too much Turn down the main volume
The channel sound
is wrong Channel sound mode is not correct Press 'CH. MODE' on the panel or
remote control
Music les in USB
can’t be played for
long period of time
The USB les is not supported Delete unsupported les
The phone cannot
transmit audio to
the amplier via
bluetooth.
1. Tha bluetooth function of
mobile phone is not opened.
2. No music is played on the
phone.
3. Amplier Bluetooth is not
paired with mobile phone
bluetooth.
4. Incorrect amplier input channel
5. Bluetooth can't connect.
1. Turn ON bluetooth
2. Open the phone and play music
3. Rematch Bluetooth connection
4. Switch the amplier input into
'BT' channel.
5. Turn o other bluetooth devices

www.PyleUSA.com
10 www.PyleUSA.com 11
PT694BT
Hi-Fi Wireless BT Home Theater Receiver
Surround Sound Stereo Amplier System with 4K Ultra HD Support, AM/FM Radio
(1000 Watt MAX)
Features:
• 5.2 Channel Receiver System
• AV (Audio/Video) Stereo Amplier
• Hi-Fi Home Theater Surround Sound
• Built-in Bluetooth Wireless Audio Streaming
• Next Gen Audio DSP Sound Processing Technology
• 4K Ultra HD TV Pass-Through Support
• 3D Video & Blu-Ray Video Pass-Through Support
• Front Panel Digital LCD Display
• AM & FM Stereo Radio
• Connect & Stream Audio from External Devices
• MP3 Digital Audio Support
• USB Flash Drive Reader
• Connection Interface: (3) x HDMI, RCA (L/R), Speaker Binding Posts, Optical /
Digital Audio
• HDMI Output + Dedicated RCA Subwoofer Output
• (2) 1/4’’ -inch Microphone Inputs
• Independent Input Source Selection
• Digital Graphic Audio Output Level Display
• Mic Echo, Bass, Treble, Volume Control Adjustment
• Over Current, Short Circuit, and Over Voltage Protection
What’s in the Box:
• AV Receiver
• Remote Control
• AM & FM Antennas
Wireless Bluetooth Connectivity:
• Simple & Hassle-Free Pairing
• Instantly Receives Wireless Music Streaming
• Works with all of Today’s Latest Devices
Smartphones, Tablets, Laptops, Computers, etc.)
• Bluetooth Version: 4.0
• Bluetooth Network Name: ‘PYLEUSA’
• Wireless Range: 30’+ ft.
Technical Specs:
• Power Output: 1000 Watt MAX
• Amplier Receiver Type: 5.2-Channel
• Speaker Impedance: 4-16 Ohm
• S/N Ratio: >80dB
• T.H.D.: <0.05%
• Frequency Response: 20Hz-20kHz
• Radio Station Memory: 30 Presets
• DSP/EQ: Live, Hall, Disco, Church, Rock, Jazz, Classic
• Digital Audio File Support: MP3 / WMA
• Maximum USB Flash Support: Up to 16GB
• Battery Operated Remote Control, Requires (2) x ‘AAA’ Batteries, Not Included
• Power Cable Length: 3.9’ ft.
• Power Supply: 120V
• Total Unit Dimensions (L x W x H): 16.9’’ x 12.8’’ x 4.9 ’’ -inches
Questions? Issues?
We are here to help!
Phone: (1) 718-535-1800
Email: suppor[email protected]
This product can expose you to a chemical or group of checmicals, which may include
“Lead (Pb)” which is known in the state of California to cause cancer, birth defects, or
other reproductive harm. For more info, go to https://www.p65warnings.ca.gov/.
Table of contents
Other Pyle Receiver manuals

Pyle
Pyle PBMSPG2BK User manual

Pyle
Pyle PT570AU User manual

Pyle
Pyle PLRVST400 User manual

Pyle
Pyle Power Sports PLMRBT19 User manual

Pyle
Pyle PLR31MP User manual

Pyle
Pyle PT696BT User manual

Pyle
Pyle PD1000BA User manual

Pyle
Pyle PT684BT User manual

Pyle
Pyle PT6000CH User manual

Pyle
Pyle PT684BT User manual