Pyle PLFMTR4 User manual

PLFMTR4
FM Transmitter Operation Manual
Thank you for purchasing the PLFMTR4! Ensure the best operation of your device by reading this
brief manual before operating your device.
Set Up:
Insert this FM transmitter into your vehicle’s cigarette lighter or power port
Tune to your radio to a desired FM frequency, then match that same
frequency on to the player by using the buttons on the unit or on the
remote control. If you’re getting a lot of static, try another station.
Plug a USB stick into the device to listen to your digital music.
You can also connect virtually any audio device using the 2.5mm to
3.5mm adaptor — just connect your iPod, iPhone, Android, or other
MP3 player to the adaptor and then plug in to the FM transmitter. To
change tracks and sort through your music, use your connected device,
not the remote control for the PLFMTR4.
Operation Guide:
Operation Guide FM transmitter Remote Control
1. How to play and stop
Press “PLAY” Button : Play the music
Second Press “PLAY” Button: Stop
Press PLAY/PAUSE Button
2. How to adjust the Volume
Long Press “ ” button :Increase the Volume；Long press
“” Button :Decrease the Volume
Press “VOL+”” Increase the
Volume；Press “VOL-””
reduce the Volume；
3. How to change the
frequency
Press “CH” button first, then
press “ ”: increase the frequency
Press ” ”: decrease the frequency
Press “CH+” button:
Increase 0.1MHZ
Press “CH-” button:
reduce 0.1MHZ
Or press the number of the
frequency what you desired
and then press “CH SET”
button.
4. How to choose music
Short Press “ ”Button: Play the next song; Short Press “ ”
Button: Play the previous song;
Press “NEXT”Button: Play
the next song; Press “PREV”
Button: Play the previous
song;
Or press the serial number of
the song then press “PICK
SONG”button
5. How to set EQ Not Supported
Press “EQ” button to switch
your favorite EQ