QMS Magicolor WX User manual

QMS magicolor WX
User's Guide —
Addendum
Clearing Service Messages
After your manual was printed, a new configuration menu option
called Service Mode was developed to allow you to clear any warning
message that doesn’t automatically clear after you’ve taken the nec-
essary corrective action.
For example, you’ll need to use this option when you replace a devel-
oper cartridge to remove the REPLACE
x DEVELOPER message.
The following table indicates how to use this new option.
Press this
key to... The message window reads...
Online/
Offline Turn off the Online indicator, so you
can access the configuration menu. IDLE
Menu Access the Display Language menu.* DISPLAY LANGUAGE
ENGLISH
Menu Advance to the Set Energy Save
menu. SET ENERGY SAVE TIME OUT = 1 HR
Menu Advance to the Service Mode menu. SERVICE MODE
®®

Clearing Service
Messages
*The first menu and option that display will be the last ones that were previously
accessed.
Select Select Service Mode to clear the
warning message and save all
configurationselections(includingthe
Tray Select key selection).
SERVICE MODE
Online/
Offline Exit from the menu and ready the
printer to accept new print jobs. IDLE
Press this
key to... The message window reads...
QMS, magicolor , and the QMS logo are registered trademarks of QMS,
Inc.
Copyrighted © 1996 by QMS, Inc., One Magnum Pass, Mobile, AL 36618.
1800446-001A