QNN Safe IF-1500E User manual

QNN SAFE AUSTRALIA PTY LTD
ABN 47 168 078 233
Unit 9 / 376 Newbridge Road, Moorebank NSW 2170
Web site: www.qnnsafe.com.au
Email: [email protected]
Phone: [phone]
Page 1 of 2
USER’S MANUAL FOR IF-1500E SAFE
Serial Number:
This package contents:
User manual
4 AA Batteries
Please contact your retailer or Qnn Safe Australia P/L if any shortage occurred
For the first time use, it needs to supply 4 AA batteries power to the safe:
Counter clockwise to remove the Keypad, then to insert the supplied 4 AA
batteries into the Battery Box:
After enter the right code, then turn the handle clockwise to open the door
This safe is operated by the digital code.
The factory setting for the Personal Code is: “1 2 3 4 5 6”
Opening instructions:
Press and then the code, and then press .(Factory setting Personal Code
“123456”)
Green light on with one beep indicated that the digital lock is unlock.( factory
setting master code “123456”)
Turn the handle clockwise, safe now is unlocked.
All light off with 2 beeps means a wrong code try. 3 continual wrong code tries
will lead a freezing period of 5 minutes

QNN SAFE AUSTRALIA PTY LTD
ABN 47 168 078 233
Unit 9 / 376 Newbridge Road, Moorebank NSW 2170
Web site: www.qnnsafe.com.au
Email: [email protected]
Phone: [phone]
Page 2 of 2
Closing instructions:
Close the door
Turn the handle counterclockwise to lock the door
Changing Master Code:
Please keep the door at opening position during the whole processing until fully
ensure that the code is changed correctly.
For security reasons, please change to your own code after the first opening.
Your code can be set up to 10 digits
Open the safe door
Press then enter the Personal Code, then press . Orange light on with one
beep.
Press , press and then enter a new Personal Code then press
Enter the new Personal Code again then press to confirm.
Orange light on with one beep means the Personal Code has been change
successful
Keep the door open, check and remember the code
Orange light off with two beeps means changing is fault. And the old Personal
Code is still in place.
Cautions:
When the green light change to yellow, it means that the batteries need to be
replaced. Please replace new batteries as soon as possible.