Quantum DXi6700 series Technical manual

www.quantum.com
DXi6700/DXi6701/DXi6702
DXi6700, DXi6701, and
DXi6702 Site Planning Guide
Product Overview
The DXi6700 family of disk backup and replication appliances use
Quantum’s data deduplication technology to expand the amount of
backup data users can retain on fast-recovery RAID systems by 10 to 50
times. The result is a cost-effective way for IT departments to store backup
data on disk for months instead of days, providing high speed, reliable
restores, increasing available data recovery points, and reducing media
management.
For disaster recovery in distributed environments, the DXi6700 systems
make automated WAN replication practical by dramatically reducing the
bandwidth required to move backup data securely between sites.
DXi6700 solutions are integrated systems that are easy to install and use
with all leading backup applications. They provide best-in-class
performance with flexible, easy-to-use interface options including NAS,
OST, virtual library, or mixed presentations, as well as Ethernet and Fibre
Channel connectivity. DXi6700 appliances are part of a comprehensive set
of backup solutions, serviced and supported by Quantum, the leading
global specialist in backup, recovery, and archive.
Note: This Site Planning Guide is for DXi6700 with DXi 2.0.1 Software.
DXi6700 Node
DXi6700 Expansion
Module
Contents
Product Overview................................... 1
Included With Your DXi6700, DXi6701,
and DXi6702........................................... 2
Licenses .............................................. 2
Installation ............................................. 3
Rack Compatibility............................. 3
DXi6700 Setup and Configuration..... 3
Network Configuration...................... 4
About Network Segmentation........... 5
General Recommendations................ 6
DXi6700 Segmentation Options ........ 6
Replication Firewall Port
Requirements ..................................... 9
Installation and Integration Services. 9
Service .................................................. 10
DXi6700 Warranty............................ 10
Service Package Upgrades ............... 10
Email Home...................................... 11
StorageCare™ Guardian................... 11
DXi Advanced Reporting.................. 11
DXi6700, DXi6701, and DXi6702
Configurations ..................................... 12
DXi6700, DXi6701, and DXi6702
Shipping Information........................... 14
DXi6700, DXi6701, and DXi6702
Specifications ....................................... 14
Physical Characteristics.................... 16
Environmental Specifications .......... 21

2Included With Your DXi6700, DXi6701, and DXi6702
DXi6700, DXi6701, and DXi6702 Site Planning Guide
Included With Your DXi6700, DXi6701, and DXi6702
The DXi6700, DXi6701, and DXi6702 are fully configured to your specifications and 
pre-tested in the factory. Every DXi6700 configuration arrives with all necessary parts
included. Each system comes with an accessory kit containing rack-mount hardware and
a Quick Reference and Documentation CD which includes the
User’s Guide .
Licenses The following licenses are included with the DXi6700, DXi6701, and DXi6702. Some
licenses are pre-installed and some are included on License Certificates, as noted below.
•NAS - Enables the NAS interface to hosts. (License key is pre-installed on all DXi6700
models.)
•VTL - Enables the VTL interface to hosts. A license for 80 virtual tape drives is pre-
installed, and additional virtual tape drives licenses can be added through the VTL
license area. (License key is pre-installed on all DXi6700 models.)
•Backup Application Specific - Enables the backup application specific path to tape
capability. (License key is pre-installed on all DXi6700 models.)
Note: DXi6700, DXi6701, and DXi6702 support NDMP V4.
•Data Deduplication - Enables the data deduplication capability. (License key is pre-
installed on all DXi6700 models.)
•Replication - Enables replication capability. (License key is pre-installed on all
DXi6700 models.)
•Storage Capacity - Enables the installed storage capacity for the system. (License
key is pre-installed on all DXi6700 models.)
A storage capacity license key is pre-installed for all capacity shipped from the
factory. You must install license keys for additional capacity purchased after the
initial point of sale are installed.
Note: If you purchase a storage capacity upgrade, a License Certificate to enable
the additional capacity is included with the upgrade.
•OST - Enables the OpenStorage (OST) connection. (License Certificate is included
with all DXi6700 models.)
Follow the instructions on the License Certificate to obtain a license key at
www.quantum.com. Installing the OST license also enables the OST Direct PTT (path
to tape) capability on the DXi.
DXi Accent Quantum’s DXi Accent software accelerates backups and reduces network bandwidth
requirements by distributing deduplication between the backup server and DXi
appliances. With DXi Accent, backup windows are reduced and network bottlenecks are
eliminated.

Installation 3
DXi6700/DXi6701/DXi6702
To use DXi Accent, you must install the Quantum OST Client Plug-in on the media server.
For information about installing the OST Plug-in and using DXi Accent, see the
Symantec
NetBackup OST Configuration Guide
.
Installation
Rack Compatibility Nearly all standard four-post 19” server racks meeting EIA-310 specifications are
compatible with the DXi6700 rack mount kits. Rack cabinets meeting EIA-310
specifications have an alternating pattern of three holes per rack unit with center-to-
center hole spacing (beginning at the top hole of a 1-U space) of 15.9 mm, 15.9 mm,
and 12.7 mm (0.625 inch, 0.625 inch, and 0.5 inch) for the front and back vertical rails.
For detailed information, refer to the
DXi6700 Installation and Configuration Guide (6-
67201) or the
DXi6700 Installation and Configuration Guide (6-67196).
Note: The rack mounting rails extend to support rack depths from 26.5 to 36.4 inches
(67.3 to 92.4 cm).
When planning your rack installation, be sure to consider leaving room in the rack for
future system expansion. You can expand the storage capacity of the DXi6700 by adding
up to nine expansion modules. Also be sure to leave adequate room behind the rack to
open the rear rack door.
See Physical Characteristics on page 16 for node and expansion module rack space
requirements.
DXi6700 Setup and
Configuration
After hardware has been installed and initially configured, you are ready to use your
DXi6700. The remote management console allows you to reconfigure your DXi6700 at
any time.
Required Network Information
To utilize the remote management console of the DXi6700, you must connect it to your
network.
Note the following considerations:
• DHCP (Dynamic Host Configuration Protocol) is not supported.You must provide a
static IP address at the time of installation.
• The default IP Address is: 10.1.1.1
You and other administrative users can always return to the remote management
console to modify all DXi6700 settings, including network settings. Refer to the
DXi6700
User’s Guide
included on the Quick Reference and Documentation CD for additional
information on initially configuring your DXi6700.

4Installation
DXi6700, DXi6701, and DXi6702 Site Planning Guide
Network Configuration The DXi6700 allows you to perform the following types of network configuration:
•Basic - The Basic network option allows you to configure the DXi6700 with a single
bonded interface. All physical Ethernet ports are bonded together to act as a single
interface (logical port). This interface is used for all types of network traffic
(replication, management, and data) and uses one set of network settings.
The Basic network option is simpler to set up and meets typical network and
performance needs. Use the Basic option unless you are sure you need to use a
custom or segmented configuration.
Note: The Basic network option requires one set of network settings (IP address,
network mask, and gateway).
•Custom - The Custom network option allows you to configure the DXi6700 with
individual IP subnet information for each physical interface. In addition, you can also
create bonded interfaces (logical ports) consisting of two or more physical ports.
The Custom network option provides a great amount of flexibility to meet specific
network needs but is more complex to set up and may require switch configuration
changes. Use the Custom network option only if it is required by your network.
Note: The Custom network option requires one or more sets of network settings
(IP address, network mask, and gateway), one for each configured network
interface.
•Segmented - The Segmented network option allows you to configure the DXi6700
with network segmentation. You can select from different bonding scenarios that
route different types of network traffic (replication, management, and data) over
different network interfaces. Each type of traffic uses its own set of network
settings.
The Segmented network option can provide performance and security advantages
for some networks but is more complex to set up and may require switch
configuration changes. Use the Segmented network option only if it is required by
your network.
Note: The Segmented network option requires three sets of network settings (IP
address, network mask, and gateway), one for each traffic type
(replication, management, and data).
Caution: Configuring Custom or Segmented network settings requires advanced
networking knowledge. When selecting network segmentation options
other than the Basic option, contact your network administrator for
assistance. For more information, refer to the
Quantum DXi6700 User’s
Guide (6-67205).

Installation 5
DXi6700/DXi6701/DXi6702
Caution: For effective bonded network use, a properly configured network switch is
required. (A network switch is not supplied with the DXi6700.) The
DXi6700 bonding settings must match the switch settings. If the switch
settings and the DXi6700 settings do not match, your system may become
inaccessible through the switch.
About Network
Segmentation
Network segmentation provides the ability to split your network into subnetworks or
segments. There are two main purposes for segmenting your network:
•Separate Physical Interfaces - If your network is physically partitioned with no
connectivity between the partitions, the DXi6700 needs the ability to communicate
with each partition individually.
•Combine or Separate Network Traffic - Network traffic is either separated
according to specific network needs or combined on a single IP address for
simplicity. The DXi6700 has the capability of separating data traffic, replication
traffic, and management traffic. Each traffic type can have its own IP address or they
can be combined on a single IP address.
Some DXi network settings and configuration combinations can have wide ranging and
subtle effects throughout the server and storage ecosystem. Possible negative effects of
improper configuration range from sub-optimal performance to “silent” network
problems that are hard to diagnose. In general, the simplest configuration that meets
your requirements is preferred. The guidelines below are presented in sequence from
basic through advanced.
All configuration items described are located in the DXi6700 remote management
console, on the Configuration > System > Network page.
Note: One IP address is required for non-segmented configurations. Three IP
addresses are required for segmented configurations (one IP address for each
traffic type). Keep this in mind when planning the DXi6700 network
configuration with your network administrator.
The recommendations and configurations presented below assume that the DXi6700
system is being deployed in an environment that is not VLAN managed, or in a VLAN
managed environment that is properly configured for visibility to the DXi.
If your specific requirements cannot be met using any of the configurations described
below, please contact Quantum Customer Support for additional options.
Chapter 9, “DXi6700 Configuration,” in the
DXi6700 User’s Guide contains descriptions
of the network segmentation options, however, refer to the following sections for
network segmentation recommendations:
•General Recommendations
•DXi6700 Segmentation Options

6Installation
DXi6700, DXi6701, and DXi6702 Site Planning Guide
General
Recommendations
When considering the use of network segmentation, refer to the following general
recommendations:
Avoid Segmentation Where Possible
Segmentation options are provided for use in environments where it is required to
separate management, data, and replication traffic, but in most cases this is not
necessary and simply introduces unneeded configuration complexity.
Avoid LACP
While the use of LACP (Link Aggregation Control Protocol) to manage the allocation of
traffic across bonded DXi ports is supported as an advanced configuration option, its
use is discouraged. LACP configuration can be complex, and improper configuration can
render your system inaccessible. Also, the router must be configured for LACP before
enabling LACP on the DXi.
Use Round Robin
Where possible, use of balanced Round Robin (Mode zero) bonds is preferred for
simplicity. Round Robin refers to the method used by the DXi system to balance
outbound data transmission. It has no effect on data reception inbound to the DXi
system. Inbound traffic is controlled by the load balancing algorithm within the
upstream Ethernet switch. Based on the switch algorithm in use, traffic observed
inbound to the DXi system may or may not appear balanced. This is normal.
DXi6700 Segmentation
Options
The following network segmentation recommendations are listed in order of
complexity:
•Basic Network Recommendations
•Intermediate Network Recommendations
•Advanced Network Recommendations
Basic Network Recommendations
Basic network configurations do not include network segmentation, do not require
switch re-configuration, and conform to the General Recommendations on page 6. No
Segmentation means that data, replication, and management traffic may use the same
network. If your network policies require separation of replication or management
traffic, continue to the Advanced Network Recommendations on page 8.
DXi6700 (2 x 1 GbE Ports) and DXi6701 (6 x 1 GbE Ports)
If less than 1 Gb per second (~450 GB/hr) of performance is required, follow these
steps. Otherwise proceed to the Intermediate Network Recommendations on page 7.
1For Segmentation, select BOND ALL (Not segmented).
2For Bonding, select Round Robin (Mode 0).

Installation 7
DXi6700/DXi6701/DXi6702
3Connect a single DXi Ethernet port (ETH0 preferred) to your switch and configure IP
information appropriately on the Network page.
DXi6702 (2 x 1 GbE Ports and 2 x 10 GbE Ports) - 10 GbE Connectivity Not Available
If single 1 Gb port connectivity meets requirements, follow these steps. Otherwise
proceed to the Intermediate Network Recommendations on page 7.
1For Segmentation, select BOND ALL 1 Gb (Not segmented).
2For Bonding, select Round Robin (Mode 0).
3Connect a single DXi 1 Gb Ethernet port (ETH0 preferred) to your switch and
configure IP information appropriately on the Network page.
DXi6702 (2 x 1 GbE Ports and 2x 10 GbE Ports) - 10 GbE Connectivity Is Available
If single 10 Gb connectivity is desired and meets requirements, follow these steps.
Otherwise proceed to the Intermediate Network Recommendations on page 7. Use of
multiple 10 Gb connections is currently not recommended.
1For Segmentation, select BOND ALL 10 Gb (Not segmented).
2For Bonding, select Round Robin (Mode 0).
3Connect a single DXi 10 Gb Ethernet port (ETH4 preferred) to your switch and
configure IP information appropriately on the Network page.
Intermediate Network Recommendations
Intermediate network configurations do not include segmentation, but do require
switch re-configuration and conform to the General Recommendations on page 6. No
Segmentation means that data, replication, and management traffic may use the same
network. If your network policies require separation of replication or management
traffic, continue to the Advanced Network Recommendations on page 8.
DXi6700 (2 x 1 GbE Ports) and DXi6701 (6 x 1 GbE Ports)
If multiple 1 Gb port connectivity is required, follow these steps:
1For Segmentation, select BOND ALL (Not segmented).
2For Bonding, select Round Robin (Mode 0).
3Connect multiple DXi Ethernet ports (ETH0–ETH1 for DXi6700, or ETH0–ETH5 for
DXi6701) to your switch based on your requirements. Configure IP information
appropriately on the Network page.
4Contact your network administrator to create a Round Robin compatible Link
Aggregation Group on the switch encompassing all connected ports.
DXi6702 (2 x 1 GbE Ports and 2 x 10 GbE Ports) - 10 GbE Connectivity Not Available
If dual 1 Gb port connectivity meets requirements, follow these steps:
1For Segmentation, select BOND ALL 1 Gb (Not segmented).
2For Bonding, select Round Robin (Mode 0).

8Installation
DXi6700, DXi6701, and DXi6702 Site Planning Guide
3Connect both DXi 1 Gb Ethernet ports (ETH0 and ETH1) to your switch and
configure IP information appropriately on the Network page.
4Contact your network administrator to create a Round Robin compatible Link
Aggregation Group on the switch encompassing the ports connected to ETH0 and
ETH1.
DXi6702 (2 x 1 GbE Ports and 2 x 10 GbE Ports) - 10 GbE Connectivity Is Available
For simplicity, use of both 10 GbE ports simultaneously is discouraged. Configuration
recommendations for the use of bonded 10 GbE ports are unique to the type of 10 Gb
switch used. Contact Quantum Customer Support for specific guidance if you require
dual-10 GbE connectivity.
Advanced Network Recommendations
Advanced configurations include segmentation for separation of data, management,
and replication traffic, but otherwise conform to the General Recommendations on
page 6. Switch configuration changes may be required. Note that segmentation is
discrete. For example, if an option indicates ETH0 (Replication), BOND ALL-1
(Management/Data), replication traffic will exclusively traverse port ETH0, and
Management and Data traffic will exclusively traverse ETH1.
DXi6700 (2 x 1 GbE Ports) and DXi6701 (6 x 1 GbE Ports)
For advanced network configuration, follow these steps:
1For Segmentation, select the appropriate configuration option to isolate traffic as
necessary.
2For Bonding, select Round Robin (Mode 0).
3Connect the required Ethernet ports (ETH0–ETH1 for DXi6700, or ETH0–ETH5 for
DXi6701) to your switch. Configure IP information appropriately on the Network
page.
4If a Bonded configuration was selected under Segmentation, contact your network
administrator to create a Round Robin compatible Link Aggregation Group on the
switch encompassing the bonded ports.
DXi6702 (2 x 1 GbE Ports and 2 x 10 GbE Ports) - 10 GbE Connectivity Not Available
For advanced network configuration, follow these steps:
1For Segmentation, select BOND ALL 1 Gb (Replication/Management/Data).
2Connect both DXi 1 Gb Ethernet ports (ETH0 and ETH1) to your switch and
configure IP information appropriately on the Network page.
3Switch configuration changes are required. Contact your network administrator to
create a Round Robin compatible Link Aggregation Group encompassing the
bonded ports.
DXi6702 (2 x 1 GbE Ports and 2 x 10 GbE Ports) - 10 GbE Connectivity Is Available
For advanced network configuration, follow these steps:

Installation 9
DXi6700/DXi6701/DXi6702
1For Segmentation, select the appropriate configuration option to isolate traffic as
necessary.
2For Bonding, select Round Robin (Mode 0).
3Connect the required Ethernet ports to your switch and configure IP information
appropriately on the Network page.
For simplicity, use of both 10 GbE ports simultaneously is discouraged.
Configuration recommendations for the use of bonded 10 GbE ports are unique to
the type of 10 Gb switch used. Contact Quantum Customer Support for specific
guidance if you require dual-10 GbE connectivity.
4Contact your network administrator to create a Round Robin compatible Link
Aggregation Group on the switch corresponding to each group of bonded ports.
Replication Firewall
Port Requirements
The following firewall ports must be opened for replication to operate:
•Port80
• Port 1062
Installation and
Integration Services
Installation and integration of the DXi6700 systems by Quantum is not required since
the DXi6700 are customer installable. Quantum recommends that system installation be
performed only by qualified network or system administrators who have a working
knowledge of ISV setup and configuration.
If you want to purchase professional installation services, please contact your Quantum
Sales representative to discuss installation services.
Phone support for the installation process is available via the Quantum support number
for your area. Quantum World Wide phone support is as follows:
Americas:
800-284-5101 (toll free)
949-725-2100
Europe, Middle East and Africa:
00800-4-782-6886 (toll free)
[phone]
Asia Pacific:
[phone] (toll free)
[phone]

10 Service
DXi6700, DXi6701, and DXi6702 Site Planning Guide
Service
DXi6700 Warranty The DXi6700 warranty includes one year of Quantum’s Bronze Support Plan. This
includes next business day on-site response, 5x9 telephone support, and on-line
resources. This warranty covers the DXi6700 and all drives, and includes firmware
downloads, telephone support, Email Home, and Internet access to Quantum’s online
Customer Support web site.
The Quantum Customer Support web site features online service request processing,
Web-based event status tracking, and a comprehensive Knowledge Base. Quantum’s
Knowledge Base gives you 7x24 real-time electronic access to complete product and
support resources and the expertise of Quantum’s Global Services organization.
•Customer Replaceable Units (CRUs) - Power supply module, solid state drive
(64 GB, 2.5”) in carrier, hard disk drive (1TB, 3.5”) in carrier, external SAS cable
•Field Replaceable Units (FRUs) - Chassis (Node), chassis (Expansion Module), 4 port
1 GbE NIC, 2 port 10 GbE NIC, 2 port 8 Gb Fibre Channel HBA, RAID controller, DDR3
memory module, battery backup module (BBU), internal SAS cable (Node), internal
SAS cable (Expansion Module), DVD-ROM drive, 80mm chassis fan (internal center),
80mm chassis fan (rear exhaust)
Note: The above lists may not be comprehensive. For additional information on FRUs,
please contact your Quantum sales representative.
Service Package
Upgrades
Quantum’s Global Services organization is geared towards delivering the fastest possible
response and root cause resolution, helping you maximize your backup investments,
better manage processes, and make the best use of your resources. We ensure total
customer satisfaction by providing comprehensive, responsive services on a worldwide
basis.
A variety of support options are available to you via Quantum’s tiered hardware support
plans to meet a range of budget and availability requirements. Quantum’s Support
Plans include Next Business Day Gold (Next Business Day Onsite, 7x24 Phone Support),
Gold (7x24x4 Hr on-site, 7x24 phone support), and a customized Platinum offering. A
Warranty extension of Bronze (5x9xNBD on-site, 5x9 phone support) is also an option
for the second and third year of ownership. Features of the Gold and Platinum plans
include: 24-hour telephone support, on-site response, access to strategic account
management (available with select service packages), priority call handling, strategically
located spares parts, online resources, and firmware upgrades. For more information on
these service plans, please visit www.quantum.com or contact your Quantum Sales
Representative.
Quantum service engineers are available around the world and are deployed to respond
to on-site service demands. In addition, spare part depots are strategically located
around the globe so that service technicians have access to the parts and equipment
necessary to maintain or repair your DXi6700.

Service 11
DXi6700/DXi6701/DXi6702
Email Home The Email Home capability can be configured to automatically send XML-based reports
to e-mail recipients.
The report represents a snapshot of the system information at the time the report is
generated. Quantum recommends generating and saving a report before performing a
software upgrade or reconfiguring the system.
StorageCare™ Guardian StorageCare Guardian is a remote monitoring and diagnostic solution that enables
Quantum to proactively monitor the health of Quantum systems over the Internet and
use intelligent diagnostics data to remotely service the equipment if issues arise.
StorageCare Guardian delivers more reliable backups and faster resolution time for
customers at no additional cost for supported products under warranty or service
contract.
More Reliable Backups
Leveraging the intelligence inside Quantum’s storage systems, StorageCare Guardian
proactively monitors the health of the units, uses diagnostics data to predict possible
failures, and determines whether or not the problem involves a Quantum product or
other critical components in the environment.
Faster Resolution Time
When issues occur, StorageCare Guardian provides better diagnostics data that will
enable Quantum to identify the root cause for rapid problem resolution.
StorageCare Guardian can be downloaded from:
http://www.quantum.com/ServiceandSupport/Services/GuardianInformation/Index.aspx
DXi Advanced
Reporting
DXi Advanced Reporting, which is included on all DXi appliances, sets new standards for
onboard intelligence by giving users a detailed view of internal appliance operations and
provides them with years of backup and replication data for extended trend analysis.
DXi Advanced Reporting reduces administration time, improves operations, streamlines
performance tuning, and helps users maximize the value of their DXi appliances. For
systems with a larger scope, Quantum Vision™ management software provides
industry-unique capabilities, giving IT departments global management of all their
Quantum disk and tape systems from a single console. Vision’s centralized reporting
and flexible trend analysis tools help users optimize system value by giving them
automated, flexible access to the information they need to make proactive decisions
concerning on-going system administration, dynamic capacity planning, and system-
wide troubleshooting.

12 DXi6700, DXi6701, and DXi6702 Configurations
DXi6700, DXi6701, and DXi6702 Site Planning Guide
DXi6700, DXi6701, and DXi6702 Configurations
The DXi6700, DXi6701, and DXi6702 can be ordered in the following configurations
(see Tab l e 1 and Tab le 2 ).
Table 1 DXi6700
Configurations
Configuration
Usable
Capacity*
Expansion
Modules with
1 TB Drive (Adds
8 TB Usable
Capacity)**
Expansion
Modules with
2 TB Drive (Adds
16 TB Usable
Capacity)**
Rack Space
Required
DXi6700
•1Node
• 4 RAID controller cards
• 2 x 1 GbE Ethernet ports
• 4 x 8 Gb Fibre Channel ports
24 TB 2 – 3U for node
2U for each
expansion
module
32 TB 3 –
40 TB 4 –
40 TB 2 1
48 TB 5 –
48 TB 3 1
56 TB 6 –
56 TB 2 2
* To upgrade the capacity of a DXi6700 to 64 TB or greater, the DXi must be converted to a DXi6701 or DXi6702 first. For more
information about model conversion, see the
Quantum DXi6700 to DXi6701/DXi6702 and DXi6701 to DXi6702 Conversion
Instructions (6-67195).
** For all DXi6700 configurations shipping from the factory, the included expansion modules have 1 TB drives. For DXi6700 field
capacity upgrades, expansion modules with 1 TB drives or 2 TB drives may be used. Any combination of expansion modules
(with 1 TB drives or 2 TB drives) may be used for field capacity upgrades as long as the total capacity does not exceed 56 TB. The
table does not list all possible combinations. To use an expansion module with 2 TB drives, the DXi6700 must be running DXi
2.0.1 software or later.

DXi6700, DXi6701, and DXi6702 Configurations 13
DXi6700/DXi6701/DXi6702
Table 2 DXi6701 and DXi6702
Configurations
Configuration Usable Capacity
Expansion
Modules with
1 TB Drive (Adds
8 TB Usable
Capacity)**
Expansion
Modules with
2 TB Drive (Adds
16 TB Usable
Capacity)**
Rack Space
Required
DXi6701
•1Node
• 2 or 4 RAID controller cards*
• 6 x 1 GbE Ethernet ports
• 4 x 8 Gb Fibre Channel ports
DXi6702
•1Node
• 2 or 4 RAID controller cards*
• 2 x 1 GbE Ethernet ports
• 2 x 10 GbE Ethernet ports (optical
or Twinax)
• 4 x 8 Gb Fibre Channel ports
8 TB – – 3U for node
2U for each
expansion
module
16 TB 1 –
24 TB 2 –
24 TB – 1
32 TB 3 –
32 TB 1 1
40 TB 4 –
40 TB – 2
48 TB 5 –
48 TB 1 2
56 TB 6 –
56 TB – 3
64 TB 7 –
64 TB 1 3
72 TB 8 –
72 TB – 4
80 TB 9 –
80 TB 1 4
* DXi6701 and DXi6702 configurations with 0 or 1 expansion modules include 2 RAID controller cards. All other configurations
include 4 RAID controller cards.
** Any combination of expansion modules (with 1 TB drives or 2 TB drives) may be ordered or used for field capacity upgrades as
long as the total capacity does not exceed 80 TB. The table does not list all possible combinations.

14 DXi6700, DXi6701, and DXi6702 Shipping Information
DXi6700, DXi6701, and DXi6702 Site Planning Guide
DXi6700, DXi6701, and DXi6702 Shipping Information
The DXi6700, DXi6701, or DXi6702 is delivered in the following configurations (see
Ta b l e 3 ). Each node and expansion module ships in its own box. Each node shipping box
weighs approximately 125 lbs. (56.7 kg). Each expansion module shipping box weighs
approximately 75 lbs. (34.0 kg). All boxes for each DXi6700, DXi6701, or DXi6702
configuration are shipped on a single pallet.
Table 3 DXi6700, DXi6701, or
DXi6702 Shipping
Configurations
Number of Nodes
Number of
Expansion Modules Pallet Dimensions Total Pallet Weight
10Width: 43 in. (109.2 cm)
Length: 28 in. (71.2 cm)
Height: 16 in. (40.6 cm)
Approximately 125 lbs. (56.7 kg)
11Width: 43 in. (109.2 cm)
Length: 28 in. (71.2 cm)
Height: 26 in. (66.0 cm)
Approximately 200 lbs. (90.7 kg)
12Width: 43 in. (109.2 cm)
Length: 28 in. (71.2 cm)
Height: 35 in. (88.9 cm)
Approximately 275 lbs. (124.7 kg)
13Width: 52 in. (132.1 cm)
Length: 42 in. (106.7 cm)
Height: 27 in. (68.6 cm)
Approximately 435 lbs. (197.3 kg)
14Width: 52 in. (132.1 cm)
Length: 42 in. (106.7 cm)
Height: 36 in. (91.4 cm)
Approximately 510 lbs. (231.3 kg)
15Width: 52 in. (132.1 cm)
Length: 42 in. (106.7 cm)
Height: 36 in. (91.4 cm)
Approximately 585 lbs. (265.4 kg)
16Width: 52 in. (132.1 cm)
Length: 42 in. (106.7 cm)
Height: 46 in. (116.8 cm)
Approximately 660 lbs. (299.4 kg)
17Width: 52 in. (132.1 cm)
Length: 42 in. (106.7 cm)
Height: 46 in. (91.4 cm)
Approximately 735 lbs. (333.4 kg)

DXi6700, DXi6701, and DXi6702 Shipping Information 15
DXi6700/DXi6701/DXi6702
18Width: 52 in. (132.1 cm)
Length: 42 in. (106.7 cm)
Height: 56 in. (91.4 cm)
Approximately 810 lbs. (367.4 kg)
19Width: 52 in. (132.1 cm)
Length: 42 in. (106.7 cm)
Height: 56 in. (116.8 cm)
Approximately 885 lbs. (401.4 kg)
Number of Nodes
Number of
Expansion Modules Pallet Dimensions Total Pallet Weight

16 DXi6700, DXi6701, and DXi6702 Specifications
DXi6700, DXi6701, and DXi6702 Site Planning Guide
DXi6700, DXi6701, and DXi6702 Specifications
This section lists characteristics and specifications the DXi6700, DXi6701, and DXi6702.
These characteristics and specifications are categorized as follows:
•Physical Characteristics
•Environmental Specifications
Note: For hard drive specifications see the appropriate hard drive product manual.
Physical Characteristics The following tables provide dimensions and other physical characteristics of the
DXi6700, DXi6701, and DXi6702 system components:
•Tab l e 4 - Physical Characteristics
•Tab l e 5 - Storage Capacity
•Tab l e 6 - Cable Drops
•Tab l e 7 - Virtual Device Limits and Hardware Interfaces
•Tab l e 8 - Power Requirements
Table 4 Physical Characteristics
Table 5 Storage Capacity
Node Expansion Module
Height 5.2 in. (13.2 cm) 3.5 in. (8.9 cm)
Width (side to side) 17.2 in. (43.7 cm) 17.2 in. (43.7 cm)
Depth (front to back) 25.5 in. (64.8 cm) 25.5 in. (64.8 cm)
Weight (stand alone) 72 lbs. (32.7 kg) 52 lbs. (23.6 kg)
Rack Space Required 3U 2U
Air clearance Open 4 in. (10.2 cm) behind unit for proper air flow
DXi6700, DXi6701, and DXi6702 Storage Capacity
Usable capacity DXi6700 - From 24 to 56 TB
DXi6701 and DXi6702 - From 8 to 80 TB
Capacity increments 8 TB (expansion module with 1 TB drives) or 16 TB (expansion module with
2 TB drives)

DXi6700, DXi6701, and DXi6702 Specifications 17
DXi6700/DXi6701/DXi6702
Table 6 Cable Drops
Table 7 Virtual Device Limits
and Hardware Interfaces
DXi6700, DXi6701, and DXi6702 Cable Drops
Ethernet Cable Drops DXi6700 (2 x 1 GbE ports) - 1 to 2 1 GbE Ethernet connections for NAS or
OST connectivity, replication, and remote management
DXi6701 (6 x 1 GbE ports) - 1 to 6 1 GbE Ethernet connections for NAS or
OST connectivity, replication, and remote management
DXi6702 (2 x 1 GbE ports and 2 x 10 GbE ports) - 1 to 2 1 GbE Ethernet
connections and 1 to 2 10 GbE Ethernet connections (optical or Twinax) for
NAS or OST connectivity, replication, and remote management
Note: The 10 GbE Copper (Twinax) cable options that Quantum provides
do not support all switches. Please note the supported switches
during the purchase-configuration process, and if the Twinax cables
supplied by Quantum are
not compatible with your switch, then you
will need to provide your own compatible Twinax cables from your
switch vendor. Be sure to have these available before the system
installation takes place.
Fibre Channel Drops 1 to 4 Fibre Channel connections for data transfer and path-to-tape
connections
Power Outlets Node - 2 USA type 3-prong power outlets (Nema 5-15) or 2 C13 type
3-prong power outlets (IEC320 C13). For additional information, see
Ta b l e 8.
Expansion Module (each) - 2 USA type 3-prong power outlets (Nema
5-15) or 2 C13 type 3-prong power outlets (IEC320 C13).
USA type 3-prong power outlet (Nema 5-15)
C13 type 3-prong power outlet (IEC320 C13)
DXi6700, DXi6701, and DXi6702 Virtual Device Limits and Hardware Interfaces
Virtual Device Limits VTL backup target: 64 partitions maximum
NAS backup target: 128 shares maximum (NFS or CIFS)
OST backup target: 100 storage servers maximum
Note: Samba version: 3.5.2

18 DXi6700, DXi6701, and DXi6702 Specifications
DXi6700, DXi6701, and DXi6702 Site Planning Guide
Hardware / Interfaces DXi6700
2 ports 100/1000BASE-T Ethernet (RJ45 connector) and 4 ports 8 Gb Fibre
Channel (LC connector)
DXi6701
6 ports 100/1000BASE-T Ethernet (RJ45 connector) and 4 ports 8 Gb Fibre
Channel (LC connector)
DXi6702
2 ports 10/100/1000BASE-T Ethernet (RJ45 connector), 2 ports 10GbE Ethernet
(optical 10GBASE-SR via LC connector or Twinax copper 10GBASESFP+Cu via
SFP+), and 4 ports 8 Gb Fibre Channel (LC connector)

DXi6700, DXi6701, and DXi6702 Specifications 19
DXi6700/DXi6701/DXi6702
Table 8 Power Requirements
DXi6700, DXi6701, and DXi6702 Power Requirements
Power Supplies and Cords Node Two (2) hot-swappable redundant power supplies
Two (2) USA type 3-prong power cords with
IEC320 C13 to Nema 5-15 connectors:
Two (2) C13 to C14 type 3-prong power cords with
IEC320 C13 to IEC320 C14 connectors:
Expansion Module Two (2) hot-swappable redundant power supplies
Two (2) USA type 3-prong power cords with
IEC320 C13 to Nema 5-15 connectors
Two (2) C13 to C14 type 3-prong power cords with
IEC320 C13 to IEC320 C14 connectors
Voltage Node 100–240 VAC
Expansion Module 100–240 VAC
Frequency Node 50–60Hz
Expansion Module 50–60Hz

20 DXi6700, DXi6701, and DXi6702 Specifications
DXi6700, DXi6701, and DXi6702 Site Planning Guide
Caution: To safeguard backups and to avoid potential data loss in the event of a
power outage, Quantum recommends that you connect the DXi6700,
DXi6701, or DXi6702 to an uninterruptable power supply (UPS) with a
minimum UPS capacity rating that meets the power requirements stated
above.
Average AC Current Node 570 Watts, 5.7A @ 100 VAC, 1945 BTU/hr
570 Watts, 2.4A @ 240 VAC, 1945 BTU/hr
Expansion Module 230 Watts, 2.3A @ 100 VAC, 785 BTU/hr
230 Watts, 1.0A @ 240 VAC, 785 BTU/hr
Inrush Peak AC Current Node 1100 Watts, 11.0A @ 100 VAC
1120 Watts, 4.7A @ 240 VAC
Expansion Module 300 Watts, 3.0A @ 100 VAC
420 Watts, 1.75A @ 240 VAC