Quikcell POWER FLIP User manual

QUICK START GUIDE
GUÍA DE INICIO RÁPIDO
2-in-1 Wireless
Charging Pad
Plataforma de carga
inalámbrica 2-en-1
POWER
FLIP™

Compatibility: 5W, 7.5W, 10W,15W Qi Capable Device
Compatibilidad: 5W, 7.5W, 10W, 15W Dispositivo
Qi Compatible
Wireless protocols: Most current Qi protocol (1.2.4)
Qi-PPDE
Protocolos Inalámbricos: La mayoría de protocolos
Qi (1.2.4) Qi-PPDE
Charge Distance: ≤5mm
Distancia de Carga: ≤5mm
Input Power: 12V/2A,9V/2A, or 5V/2A
Poder de Entrada: 12V/2A,9V/2A, ó 5V/2A
Output Power: 15W Max
Poder de Salida: 15W Max
Fast Charge Adapter Standard: AFC/QC2.0 at 10W,
PD/QC3.0 at 15W
Estándar de Adaptador de Carga Rápida: AFC/QC2.0
at 10W, PD/QC3.0 a 15W
Cable Type: USB-A to USB-C
Tipo de Cable: USB-A a USB-C
Weight: 241g
Peso: 241g
SPECIFICATIONS
ESPECIFICACIONES

Length/Width: 5.1 x 2.7 x 0.5in
Largo/Ancho: 5.1 x 2.7 x 0.5in
Over Charge Protection: Will keep low current standby
mode once device battery reaches 100% capacity.
Protección de sobrecarga: Mantendrá la corriente baja
en modo de espera una vez que la carga llegue al 100%
de capacidad
Certications: FCC, Qi
Certicaciones: FCC, Qi

Wireless Charging Pad/Stand
Plataforma de carga inalámbrica
3-foot USB to Type-C Charging Cable
Cable de carga de 90cm USB a Type-C
1
2
WHAT’S INSIDE
QUÉ HAY DENTRO
2
1

CHARGING POSITIONS
POSICIONES DE CARGA
Lying Flat Upright
31
2
LED Light
Luz LED
Type-C Charging Port
Puerto de carga Type-C
Built-In Stand
Soporte incorporado
13
2

Using the included Type-C charging cable, plug the
USB-C connector into your PowerFlip™and connect the
USB-A connector to a compatible port (such as a wall
charger*, car charger, or computer).
*Charger not included
Usando el cable de carga Type-C incuido, conecta
el conector USB-A a un Puerto compatible (como un
cargador de pared, cargador de auto, o computadora)
*Cargador no incluido
PLUG IT IN
STEP 1

START CHARGING
STEP 2
Place your wireless charging device on your
PowerFlip™and look for the LED light to indicate
charging has started.
Coloca tu dispositivo inalámbrico en tu PowerFlip
y busca que la luz LED indique que ha iniciado la
carga rápida.
Note: When your device is removed, ensure the
LED light turns off before using the PowerFlip™for
charging again.
Nota: Cuando retires tu dispositivo, asegúrate que
la luz LED se apague antes de usar el PowerFlip para
cargar nuevamente.
Leave your device case* on to charge! The
PowerFlip™can wirelessly charge through cases up
to 3mm thickness.

Deja tu funda del dispositivo colocada para cargar! El
PowerFlip puede pasar carga inalámbrica a través de
fundas hasta 3mm de grosor.
*Warning: Device cases that contain metal will prevent
wireless charger from charging properly.
*Advertencia: Fundas que contengan metal evitarán que
el cargador inalámbrico cargue adecuadamente.

ONE YEAR LIMITED WARRANTY
Garantía limitada de un año, visite
visit quikcell.com/warranty
PowerFlipTM
PWERFLIP-BLK
FCC ID: 2AQ93-WP07A01
Alpha Comm Enterprises Inc., LLC
1500 Lakes Parkway Lawrenceville GA 30043.
1-888-951-0909
© 2022 All rights reserved. Alphacomm and Quikcell are registered trademarks of
Alpha Comm Enterprises, LLC. All other trademarks are the property of their respective
owners. Designed by Alpha Comm Enterprises, LLC at
Diseñado por Alpha Comm Enterprises, LLC en
1500 Lakes Parkway, Lawrenceville, GA.30043.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.