Quoizel DE8959IB Mounting instructions

Part Description Quantity
A Crossbar 1pc.
2 pcs.
2 pcs.
2 pcs.
2 pcs.
2 pcs.
Finial Assembly
B
C
D
E
F
Hex Nut
Lock Washer
Package Contents
Quoizel, Inc.
6 Corporate Parkway
Goose Creek, SC
29445
Customer Service
Phone [phone]
Fax [phone]
www.quoizel.com
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing
the fixture. We strongly recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool
before removal. Do not subject glass parts to any shock while in operation or shattering may result.
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
2015 QuoizelInc.
A
B
C
D
G
E
Mounting Ball
Mounting Screw
Assembly Instruction Sheet #IS-DE8959IB
For Styles DE8959IB
1of6
August2015
Rev.B
Pleasegoto forproductcleaningtips.Gotothe
selection.
(2)CandelabraBase60WMaximum
20-30minutes
Identifyandinspectallpartsbeforebeginninginstallation.Checkpackage
contentlistanddiagramsbelowtobesureallpartsarepresent.Ifanypartsaremissingor
damaged,donotattempttoassemble,install,oroperatethefixture.Contactcustomer
serviceforreplacementparts.
www.quoizel.com Care+Maintenance
LightSource:
EstimatedAssemblyTime:
Preparation:
ToolsRequired:Flatheadscrewdriver, Phillips screwdriver,pliers,wirecutters,wire
strippers,electricaltape,safetyglasses.
Fixturecanonlybemountedinthedirectionindicatedonpage2.
H
1pc.
G
F
1pc.
Fixture Body
H
Alternate Mounting screw

DE8959IB
FINISH: IMPERIAL BRONZE
6
5
M280KTIB
G1197PA
G1198PA
M380CCIB
M387FIIB
(2)60W Candelabra
base bulbs
(not Supplied)
KIT IMPR BRNZ REPL
PANL SML CLR BEV REPL DE8959IB
PANL LRG CLR BEV REPL DE8959IB
CDCV IMPBRZ REPL CANDLE COVER
FINL IMPBRZ REPL DE8959/8976IB 1
4
4
1
3
2of6
3
2
3
4
4
1
PART NUMBER
NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/2"
REPLACEMENT PART DESCRIPTION REQ.
NO.
6
2
18959IBDE BASE IMPR BRNZ DE8959IB 1
1
9” 9”
11”
21”
10”
5
Rev.B
Fixture can only be
mounted in the
direction indicated

Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
2015 QuoizelInc.
3of6
STEP 1 Remove Fixture Hood from Glass
Frame
-
A. Prior to assembly, remove the Fixture Hood from the
Glass Frame by unscrewing the Hex Coupling. Remove
the packaging material inside of the Glass Frame.
Fixture Body
Fixture
Hood
Hex
Coupling
Glass
Frame
Figure 1
Figure 2
Crossbar
Lock Washer
Hex Nut
Fixture
Body
STEP 2 -Attach Mounting Screws, Lock
Washers and Hex Nuts to Crossbar
A. Line up a set of holes on the Crossbar (A) and Holes on
the backplate of the Fixture Body (H).
B. Thread Mounting Screws
(F) into the holes on the Crossbar (A),
pass Lock Washers (C) and thread Hex Nut (D) onto the
Mounting Screws (B)
. Hand tighten until snug.
(B) or Alternate Short
Mounting Screw
or Alternate Short Mounting
Screw (F)
STEP 3 -Attach Crossbar to Outlet Box
A. Attach the Crossbar (A) to Outlet Box and secure by
threading Outlet Box Screws (not supplied) into the
Mounting Holes on the Outlet Box. Tighten until snug.
Crossbar
Outlet
Box
Outlet Box
Screw
Mounting
Hole
Figure 3
Assembly Instruction Sheet #IS-DE8959IB
For Styles DE8959IB
August2015
Rev.B
Mounting Screw
or Alternate Short
Mounting Screw

Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
2015 QuoizelInc.
4of6
Assembly Instruction Sheet #IS-DE8959IB
For Styles DE8959IB
Figure 4
STEP 4 Attach Lanyard-
A. The purpose of the lanyard is to provide the installer a
means to support the fixture from the junction box while
connecting the electrical wires. This enables the fixture
to hang from the junction box and your hands are free to
make the wire connections.
B. TurntheButtonStopsoitmaybeinsertedintothe
crossbar slot. Make sure the Button Stop is completely
inside the crossbar. Slowly release the fixture to make
sure it is supported by the Button Stop. Proceed to the
wiring steps. Once you are complete with the wiring
there is nothing to do with Lanyard. The Lanyard will
push into the junction box when the fixture is placed for
final mounting.
Crossbar
Slot
Button Stop
Lanyard
STEP 5 Make Wire Connections-
A. Use standard wire connectors to make all wire
connections. (Connectors are not included with fixture.)
Strip and prepare wire ends according to instructions
supplied with connectors.
B. Connect White Supply Wire from the Outlet Box to White
Wire from fixture.
C. Connect Black (or Red) Supply Wire from the Outlet Box
to Black Wire from fixture.
D. Connect Ground Wire from the Outlet Box to Ground
Wire from fixture.
E. Twist connectors until wires are tightly joined together.
F. Wrap each connection with approved electrical tape and
carefully stuff all the connected wires into the Outlet Box.
Figure 6
White wire from supply White wire from fixture
Black wire from supply
(or Red)
Black wire from fixture
Ground wire from supply Ground wire from fixture
Figure 5
August2015
Rev.B

STEP 6 -Attach Fixture Body to Mounting
Screw
A. Place the backplate of the Fixture Body (G) over the
Mounting Screws (B)
and secure with Mounting Balls (E). Hand
tighten until snug.
or Alternate Short Mounting
Screw (F)
Mounting Ball
Backplate
Figure 7
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
2015 QuoizelInc.
5of6
Assembly Instruction Sheet #IS-DE8959IB
For Styles DE8959IB
STEP 8 Attach Fixture Hood to Glass Frame-
A. Place the center hole of the Fixture Hood over the top end
of the Stem, attach to the top edge of the Glass Frame.
Secure by threading the Hex Coupling onto the Stem.
Tighten until snug.
STEP 7 -Install Bulb
A. standard bulb with a candelabra screw
base 0
This fixture uses
. Maximum 6 watts.
B. Insert bulb and screw snugly into place.
Socket
Bulb
Figure 8
Figure 9
Fixture
Hood
Hex Coupling
Glass
Frame
Stem
August2015
Rev.B
Mounting Screw
or Alternate Short
Mounting Screw

STEP 9 Assemble Strut Member,
Waterproof Washer and Finial
-
A. Remove the Strut Member, the Waterproof Washer and
the Nipple from the Finial.
B. Screw one end of the Nipple into the Hex Coupling on
the top center of the Fixture Body (H). Hand tighten
until snug.
C. Pass the Strut Member and Waterproof Washer over
the top end of the Nipple. Thread the Finial (G) onto the
Nipple and hand tighten until snug.
Finial
Strut
Member
Nipple
Fixture
Body
Waterproof
Washer
Hex Coupling
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
2015 QuoizelInc.
6of6
August2015
Assembly Instruction Sheet #IS-DE8959IB
For Styles DE8959IB
STEP 10 Apply Silicone Sealer to Mounting
Balls
-
A. To prevent moisture from entering the wire
compartment, apply a small amount of silicone sealer
(not included) to the threaded side of the mounting
balls (E) and then install them onto the mounting
screws (B). Wipe off excess caulk.
Figure 10
Mounting Ball
STEP 11 Apply Silicone Sealer to Backplate-
A. Make sure exterior wall surface and fixture backplate
are free of dirt before applying caulk. Using exterior
grade caulk, start on one side of fixture backplate and
follow contour, where the fixture backplate meets the
exterior wall surface upward. Proceed to caulk over top
of backplate and down other side. Do not caulk bottom
of fixture backplate to ensure proper moisture
drainage.
Your lamp wall fixture is now assembled and ready to
use. Enjoy!
Exterior
Grade Caulk
Outdoor Fixture
Backplate
Exterior Wall Surface
Figure 12
Figure 11
Rev.B