Quoizel MRE9009WT User manual

Part Description Quantity
A
1pc.
3 pcs.
Fixture Body
B
Package Contents A
B
Mounting Screw
1of5
C
D
C
1pc.
1pc.
Shade
D
Bulb
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
E
1pc.
Cage
E
F
G
2 pcs.
Washer
F
2 pcs.
Lock Ball
G
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing
the fixture. We strongly recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool
before removal. Do not subject glass parts to any shock while in operation or shattering may result.
Assembly Instruction Sheet #IS-MRE9009WT
For Style MRE9009WT
Pleasegoto forproductcleaningtips.Gotothe selection.
(1)MediumBaseDecorativeFilament60Wbulb(provided),Maximum100W,Alternatebulb(1)23W
CFLMaximum.
20-30minutes
Identifyandinspectallpartsbeforebeginninginstallation.Checkpackagecontentlistanddiagrams
belowtobesureallpartsarepresent.Ifanypartsaremissingordamaged,donotattempttoassemble,install,or
operatethefixture.Contactcustomerserviceforreplacementparts.
www.quoizel.com Care+Maintenance
LightSource:
EstimatedAssemblyTime:
Preparation:
ToolsRequired:Flatheadscrewdriver, Phillips screwdriver,pliers,wirecutters,wirestrippers,electricaltape,safety
glasses.
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
,.
..
2015 QuoizelInc. December2015
Rev.A

MRE9009WT
FINISH: WESTERN BRONZE
1
2
PART NUMBER
NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/2"
REPLACEMENT PART DESCRIPTION REQ.
NO.
2of5
22.5”
12”
6.5” Dia.
9” Dia.
11 5”
.
G3636SH
I1101EC
GLASS CLEAR SEEDY 6.5" D
REPRODC 60W 1910 INCANDESCENT BULB
1
1
1
2
(1)Medium Base
Decorative
Filament 60W
bulbs (provided),
Maximum 100W.
Rev.A

3of5
Assembly Instruction Sheet #IS-MRE9009WT
For Style MRE9009WT
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
,.
..
Figure 1
STEP 1 -Install Bulb
A. This fixture uses Medium Base Decorative Filament 60W
bulb (C), Maximum 100W. Insert bulb and screw snugly
into place.
Socket
Bulb
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
STEP 2 -Attach Shade to Fixture Body
A. Thread Shade (D) to Fixture Body (B), hand tighten until
snug.
Shade
Fixture Body
Figure 2
STEP 3 Attach Cage to Fixture Body-
A. Pass the Bolt on the top of Cage (E) though the Hole on
the Fixture Body (B),place the Washer (F) over the Bolt,
secure by thread the Lock Ball (G) onto the Bolt on the
top of Cage (E). Hand tighten until snug.
Figure 3
Cage
Bolt
Hole
Fixture Body
Washer
Lock Ball
2015 QuoizelInc. December2015
Rev.A

4of5
STEP 4 Drill Pilot Holes on Post-
A. Carefully fit the Post Fitter over the end of the Post (not
supplied), making sure the Post Fitter is fully seated.
B. Mark the drill point for the (3) Mounting Screws, using
(3) Mounting Holes as reference. After marking hole
locations, remove fixture from post and drill 1/16” pilot
holes for screws.
Post Figure 4
Post Fitter
Figure 6
STEP 5 Make Wire Connections-
A. Use standard wire connectors to make all wire
connections. (Connectors are not included with fixture.)
Strip and prepare wire ends according to instructions
supplied with connectors.
B. Connect White Supply Wire from the Post to White Wire
from fixture.
C. Connect Black (or Red) Supply Wire from the Post to
Black Wire from fixture.
D. Connect Ground Wire from the Post to Ground Wire from
fixture.
E. Twist connectors until wires are tightly joined together.
F. Wrap each connection with approved electrical tape and
carefully stuff all the connected wires into the Post.
Figure 5
White wire from supply White wire from fixture
Black wire from supply
(or Red)
Black wire from fixture
Ground wire from supply Ground wire from fixture
Post
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
2015 QuoizelInc. December2015
Rev.A
Assembly Instruction Sheet #IS-MRE9009WT
For Style MRE9009WT
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
,.
..

5of5
STEP 6 -Attach Fixture Body to Post
A. Coat the top 1” of the Post with Clear Silicone Caulk
(not supplied) and position the Post Fitter onto the Post.
Be sure to seat it completely, aligning the holes in the
Fitter with the 1/16” Pilot Holes drilled into the Post.
B. Secure the Fixture to Post with (3) Mounting Screws.
Your fixture is now assembled and ready to use.
Enjoy!
Figure 7
Mounting
Hole
Post Fitter
Mounting Screw
Post
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
2015 QuoizelInc. December2015
Rev.A
Assembly Instruction Sheet #IS-MRE9009WT
For Style MRE9009WT
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
,.
..