V6 Remoter
Controller
Tethe r
HDMI
BOX
HDTV
Ethernet Cable 1HDMI Cable
Notes:
1. Insert the mini USB port of White Ethernet Cable into the RC’s Ethernet Port (#11 on Quick Start Guide, Page 3)
2. Ethernet Cable (White) RJ45 port insert on the HDMI Box
Getting start:
1. Hardware connection (See Quick Start Guide, Page 5to 7, step A to F)
2. Connect the HDMI Box, TV and RC as picture above
3. Select the source is HDMI (some TV has more than one HDMI port, make sure it is the port from HDMI Box)
4. Turn ON the HDMI Box by press the power button on the Adapter, 10 seconds later the LIVE-Stream is on the TV.
PS:
1. When HDMI Box is ON, only one more device can have the LIVE-Streaming on FIFISH APP
2. The default resolution is 1080P 60fps when HDMI Box is on. (PLEASE DO NOT CHANGE THE RESOLUTION ON
FIFISH APP!)
3. The HDTV latency is about 500 ms
4. HDMI Box support hot swapping, the streaming will be back on when the connection is good.
adapter 5V3A Adapter
