R for Rabbit Poppins Plus User manual

www.rforrabbit.com www.rforrabbit.com
Please read the instruction manual carefully before using the stroller and
keep it safe to refer it in the future so to make the stroller ride always safe
for the child
Warning:
1. Ensure all the locking devices are engaged before use
2. Since baby cannot control his/her head, so don’t prick the backrest to
use.
3. Always lock the stroller whenever you stop anywhere to avoid automatic
sliding of stroller
4. Always use the safety belt for safe ride of baby
5. Guardian should always be present with baby while using stroller
6. Don’t ask baby to come out from guard bar or stand up in the stroller
7. Please do not lift the stroller when the baby is in the stroller
8. Backrest adjustment must be done by Guardian.
Do not put any load on handle as it affects the stability of the stroller.
9. Stroller is meant for single baby, do not put 2 babies in the stroller
10. Please do not use the stroller on rough path or near fire.
11. Baby stroller is for the baby 6 – 36 Months, not suitable
for the child under 6 months.
12. This stroller has maximum weight capacity of 15 kg.
13. Please keep away the packaging plastics from the reach of child as it
can cause suffocation.
Maintenance:
In order to take your child on a safe joyful ride please inspect and maintain
the stroller in regular interval.
1. To open the stroller for use, please note that the locking hook must be
opened.
2. Please operate the stroller as per the instruction to avoid any injury
3. Clean the fabric of stroller with brushing and cleaning tool.
4. Don’t use or place the stroller in wet, cold or high temperature condition.

www.rforrabbit.com www.rforrabbit.com
Installation Video: youtube.com/rforrabbit
1. Grasp the front foot tube and
hold the push bar with other
hand and pull it from both the
sides and lock it with second
hook.
2. Insert the rear wheels on rear
side of stroller.
3. Insert the front wheel on front
side of stroller.
4. Put the front tray in front tray
holder.
1. Adjust the safety belt. Insert
the end socket into the safety
jacket and you will hear the
click sound. Press to open the
safety button end socket
towards inside and pull it
outwards to open. You can
adjust the length of the belt
by adjusting the top ring belt
and tail belt.
2. Tighten or Loosen the Belt
to change the Recline
position of the Back Seat.
3. Open or Close the Canopy
as per the requirement.
4. While in use, Always use
5-Point safety harness Belt.
5. To lock the stroller put leg
and press the red lock over
wheels.
6.Pull the both side buttons
and change the position of
handle to reversible position
7. To fold the stroller, please
push the button to left and
hold the folding button to
press the stroller then buckle
up the folding hook.