R for Rabbit Rock N Roll User manual

Instruction Manual
Model: Rock N Roll Stroller
R FOR RABBIT BABY PRODUCTS PVT. LTD.
A1-305, Palladium, Corporate Road, Makarba,
Ahmedabad, Gujarat - 380015
[phone] | www.rforrabbit.com
[email protected]

1
PRODUCT DETAILS
Open and Install
2
1
1.Open:Loosen folding hook,hold handle,open the frame reversibly.A“click”means the frame
is well opened.Must make sure the frame is well opened before using the stroller.
WARNING:
Before using this product, please read the instruction manual
thoroughly,
• Manual will help you in correct operation & installation
procedure, in order to avoid incorrect operation and damage.This
specification shall be kept and placed in a proper place.
• The assembly and adjustment of the product must be carried out
by the adult only. Make sure that all the locking devices are
working properly.
• Safety belt must be used properly for children while riding.
• Placing any load on the handle will affect the stability of the
vehicle.
• Don’t Leave child unattended while in use.
• Please keep off the Plastic Bags and other packaging materials
away from the children! Danger of suffocation!
• Do not use the product in traffic area.
• The maximum load carrying capacity of the stroller is 15kg, and it
should not be overloaded.
•The car basket maximum load-bearing capacity of 2kg, do not
overload use.
•The maximum load bearing capacity of the rear of the stroller is
0.5kg, and it is not allowed to be used.
•Age : 0-36 months.
Folding Button
Folding slider
Handle
Folding Hook
Folding hook
Segmentation Belt
Basket Brake Part
Rear wheel
Canopy
Front Armrest
Safety Belt
Leg Rest
Directional Device
Front wheel

4
2
2.Install rear wheel assembly: install
wheel axle through wheel holder,
cushion,wheel,cushion like arrow,
then install wheel pin and wheel
cover.Then repeat for the other
wheel.
4.Install front wheel : insert the front
wheel axle to the front wheel seat , hear
the "click" sound that is installed in place.
Press down the button and pull out the
front wheel to remove the front wheel.
1.Safety belt and cross belt use:
Buckle: insert the plug into the socket in the direction of the arrow until it is locked.
Open: press the button to open.
Shorten:Lengthen the top band, and then lengthen the tail band, locking.
Length: stretch the top band, and then shorten the tail band, locking.
3.Install rear wheel : insert rear
frame to wheel holder opening,until
you hear “clicks”; Then repeat for
the other side.
2.Backrest adjustment:Tighten the belt
with one hand and press the button.
Slight back & forth to adjust the back rest
at will.
3.Leg rest adjustment:Press leg rest
adjustment button as shown in picture 3
,pull or push to adjust.
4.Canopy:Push sun canopy as
picture 4 ( forward & backward) to
keep it open & closed.
5.Front Armrest: Press armrest button
and pull as picture 5 to disassemble it.
6.Front Wheel Orientation : Press the
front wheel directional parts, the front
wheel can be oriented. Lift up the
directional parts,the stroller can be
free direction.
7.Brake: Step down brake pedal to
stop stroller .Brake pedal must be
pushed down position when stroller
is not in use.
wheel axle
front wheel
axle
button
button
buckle open top band
tail band
wheel holder
wheel
wheel cover
rear frame
button
button
wheel holder opening
wheel pin
3
USE
3 4
1
Brake pedal
23
4 5
front wheel
seat
6 7
armrest button
Directional
part

8.Cradle and Rocking chair:
A) Turn round the front wheel: one hand holding the front
foot connector, the other hand along the direction of the arrow,pull out the front
seat, and then turned up 180 degrees untill you hear the "click" sound.
The same operation on the other side.
B.) Repeat the same process with rear wheels as well.
C.) Rocking chair: Turn over the front wheel, the backrest to the most upscale, put
down the foot board, that is, a rocking chair.
D.) Cradle: turn the front wheel, the back to the lowest level, lift foot board, that
is a cradle
1.Folding: First fold the top of the canopy, then push the folding slide to the left
and hold the folding handle, and push the push forward until the folding hook
slides into the lock hook
the front
foot connector
the front wheel
adjustment button
the front wheel seat
65
8
1
2
Folding
1
1
2
3
A
BC D
Folding button
Folding slider Folding hook