Radiant Innovation TempFairy TN1 User manual

Instruction Manual

Radiant Innovation
1
Contents
Introduction: TN1 series Infrared Thermometer……………………………………...2
Advantages and uses of the TN1 series thermometer………………………………... 2
Parts Description……………………………………………………………………...3
How to operate………………………………………………………………………..4
Unit Switch between Fahrenheit and Celsius………………………………………... 6
Mode Functions……………………………………………………………………… 6
Cleaning and Storage………………………………………………………………… 8
Changing the Battery………………………………………………………………… 8
Error Messages and Trouble Shooting………………………………………………..11
Specifications……………………………………………………………….……….. 13
Contact………………………………………………………………………………..13
Remarks: Patent Pending
CONTENTS

Radiant Innovation
2
Introduction: TN1 series Infrared Thermometer
Thank you for using this Radiant Innovation TN1 series infrared thermometer. TN1
series thermometer is designed with advanced infrared and ambient temperature
compensation technology as well as self-diagnoses functions for non-contact, accurate
and fast temperature measurements –without waiting.
TN1 series Thermometer measures wide range temperature from –22 °Cto 110 °C(-7.6
°Fto 230 °F).
Advantages and uses of the TN1 series thermometer
The TN1 is an infrared thermometer which measures wide range temperature. The TN1
series thermometer is capable of measuring the full range of in house and outdoor
temperatures from -22 °Cto 110 °C(-7.6 °F to 230 °F). TN1 also has mode adjusting
function to scan the minimum or maximum temperature. The thermometer also provides
a “LOCK” mode to monitor the temperature of certain object for as long as 60 minutes.
For professional results at home, the TN1 thermometer is safe and hygienic. It can
easily be used by children and adults. Please follow following instructions carefully.
Safety Cautions
The Sensor Lens is the most delicate part of the thermometer. Care should be
taken to avoid damage to the Sensor Lens. Keep the Sensor Lens clean to get the
accurate measurements.
The best operating ambient temperature range is between 0°C to 40 °C (32 °F to
104 °F).
Do not immerse the product into water or other liquid.
Do not use this device for Live & Die decision or Safety related applications.
Read all Instructions before using.
INTRODUCTION

Radiant Innovation
3
Parts Description
1LCD Display
2Battery Cover
3Measure Key
4Mode Key
5Sensor
6Stand
7Key Ring Hole
PARTS DESCRIPTION
1. LCD Display
2. Battery Cover
3. Measure Key
4. Mode Key
5. Sensor
6. Stand
7. Key ring Hole

Radiant Innovation
4
How to operate
The temperature is shown clearly on the digital LCD display. Follow the step-by-step
directions carefully for best results:
1. Press the “Meas.” key to power on the thermometer.
2. Always keep the sensor lens and the light cone clean before measurement.Please
refer to the “Clean and Storage” section for the detail cleaning procedures.
Warning: *Proper cleaning of lens to ensures accurate measurements.
OPERATION INSTRUCTIONS

Radiant Innovation
5
3. Measuring the temperature: Aim the thermometer on the target and press the
“Meas.” key to take the temperature.
Note: Since the viewing angle of TN1 is large, please keep the thermometer as near as
1~2cm to the target to get the accurate target temperature. The information of viewing
angle and area is shown on the sticker attached on the rear side of the thermometer.
Warning:
This Infrared Thermometer (TN1) is calibrated for Emissivity=0.95 only. Most of
Non-metal materialshave emissivity near to 0.95. But the infrared emissivity of
normal metal is much lower. TN1 may give error reading for such materials. For
example, a 100 °Cboiling pot (aluminum,emissivity~0.3) may show only 50 °C,
when you measure the temperature of the aluminum!
4. Power off: Device will automatically shut off if left idle for more than 15sec to
extend battery life.
OPERATION INSTRUCTIONS

Radiant Innovation
6
Unit Switch between Fahrenheit and Celsius
To change the Unit from Celsius( °C) to Fahrenheit( °F): When the thermometer is ON
and unit °C, press the “Mode” key several timesto switch to the mode while “°C ” is
flashy, then press the “Meas.” key to confirm the unit °F. Use the same process to
change the LCD display from °F to °C.
Mode Functions
TN1 series thermometer provides 3 modes for scanning the minimum or maximum
temperature of the certain object. It also has a “LOCK” mode for long-term operation of
the thermometer.
Using Minimum/Maximum/Lock Function
Power on the thermometer. Use a pin stick to press the “Mode” key several times until
the “MIN” startsflashing on the LCD. Then press the “Meas.” key to confirm the
minimum mode. When taking temperature at minimum mode, the display will always
show the minimum value of the measurements.
Depress the mode key again to disable the certain mode.
The same procedures will switch the thermometer into the maximum “MAX”mode. In
contrary to the minimum mode, the thermometer will pick up and display the
maximum temperature of the measuring.
UNIT SWITCH / MODE FUNCTION

Radiant Innovation
7
When the long-term monitoring of the target temperature is required, TN1 also
provide a “LOCK” mode to take the temperature without the necessary of pressing the
measure key all the time. Press the “Mode” key several times then use “Meas.” key
to confirm the setting. The measuring will keep going as long as 60 minutes until the
“Meas.” key is pressed.
There is a metal stand allocated on the rear cover of the thermometer. This stand can
keep the thermometer standing on a horizontal surface. This stand is very convenient
when using accompany with the “LOCK” mode function.
UNIT SWITCH / MODE FUNCTION

Radiant Innovation
8
Cleaning and Storage
The Sensor Lens is the most delicate part of the thermometer. Use with care when
cleaning Sensor Lens to avoid damage. Gently clean with a mild solution and do not
submerge unit into liquids. Keep the unit dry and away from direct sunlight. Store
at a temperature of between 10 °C to 40 °C (50 °F to 104 °F).
If lens is accidentally dirtied, clean the sensor lens as follows:
a.Gently wipe lens surface with a cotton swab or soft cloth moistened with water or
medical alcohol.
b.Allow the lens to fully dry for at least 30 minutes before using.
Changing the Battery
This device is supplied with one lithium cell (CR2032 x 1). A low battery power
symbol will appear on the LCD display when battery needs to be replaced.
Remember to power off the unit before replacing the battery. A malfunction may
occur if the power is on when the battery is replaced. If a malfunction occurs, restart
the device. (See the “Error Messages and Trouble Shooting” section for details.)
Removing battery cover and replace the battery
Follow the clockwise direction to loose the battery cover.
Usea pin stick to pick up the old battery. Insert new battery into battery compartment.
The battery poles polarity are shown on the battery room.
CLEAN AND STORAGE / REPLACE BATTERY

Radiant Innovation
9
Install the battery cover
Then follow the counter clockwise direction to lock the battery corer. You will hear
the voice of “Kok”when the battery cover is correctly locked.
ßThe two bumps of the battery cover will line up with the
hole of the key ring at this moment.
Warning:
The unit may be damaged when changing the battery under power on condition or
the battery was installed with the incorrect direction. Try to switch off then on one
more time if abnormal situation occurred. If the situation is still, contact your
local service center for support.
Battery may be damaged if mistreated. Do not recharge, disassemble or dispose
into fire. Dispose of used battery promptly and keep away from children.
Replace battery with the following battery types. Why restrict the brand? Use of another
battery may present a risk of fire or explosion.
SONY CR2032
FUJI CR2032
MATSUSHITA CR2032
RADIO SHACK CR2032
RENATA CR2032
VARTA CR2032
AVEREADY/UCAR CR2032
REPLACE BATTERY

Radiant Innovation
10
Error Messages and Trouble Shooting
Error Message Problem Solution
Battery is low but the device still
operative.
Replace the battery.
Battery is low and no more
measurements are possible.
Replace the battery.
The device showing a rapid
ambient temperature change.
Allow the thermometer to
rest in an environment for
more than 30min at
recommended operation
temperature.
The ambient temperature is not
within the range between -10 °C
to 50 °C(14℉to 122℉).
Allow the thermometer to
rest in an environment for
more than 30min at
temperature between 0 °C
to 40 °C(32 °Fto 104
°F).
Error5~9, the system is not
function properly.
Unload the battery, wait
for 1 minute and repower
it. If the message did not
disappear, contact the
retailer for further service.
TROUBLE SHOOTING

Radiant Innovation
11
Temperature taken is higher
than 110 °C(230 °F).
Make sure if the target
temperature is too high.
Please take a new
temperature measurement.
Temperature taken is lower
than -22 °C(-7.6 °F).
Make sure if the target
temperature is too low.
Please take a new
temperature measurement.
Device can not be powered on
to ready stage.
Change with a new
battery.
TROUBLE SHOOTING

Radiant Innovation
12
Specifications
Maximum Permissible Laboratory Error:
Range Error (which ever is greater)
Full Range when ambient = 15 °Cto 40 °C±1°C or ±1% of the reading
Full Range when ambient = otherwise ±1.5 °C or ±1.5% of the reading
Specifications Table:
ITEM TN10x
MEASUREMENT TEMP RANGE -22 °Cto 110 °C(-7.6 °F to 230 °F)
AMBIENT RANGE -10 °C to 50 °C (14 °F to 122 °F)
STORAGE RANGE -20 °Cto 50 °C(-4°F to 122 °F)
TIME BETWEEN TWO MEASUREMENTS
mMmmmm
TEMP
.ME
ASUREMENT
< 1 sec
SCALE SELECTION °C/ ℉
DISPLAY TYPE LCD
MODEL NO TN10x, TN1xx
ACTIVATION MEASURE MEAS. BUTTON
MEASURE MODE MIN / MAX / LOCK
DESIGN HAND HELD
SENSOR TYPE Thermopile
BATTERY TYPE CR2032
CASE PLASTIC
DIMENSION (LxWxH) 68*37*18mm
WEIGHT 25g
Note: Subject to change without notice.
Contact:
ØContact the nearest retailer if service is needed.
ØVisit the website of Radiant Innovation Inc. (www.raidantek.com.tw) to learn
more applications of Infrared Thermometer measurement.
SPECIFICATIONS / CONTACT