Radiforce RX350 User manual

Important
Please read this Installation Manual, and “Instructions for Use”
(separate volume) carefully to familiarize yourself with safe and
effective usage.
• Please refer to the “Instructions for Use” for basic information
ranging from connection of the monitor to a PC to using the monitor.
• The latest Installation Manual is available for download from our web
site:
http://www.eizoglobal.com
Color LCD Monitor
Installation Manual

2
This product has been adjusted specically for use in the region to which it was originally shipped. If
operated outside this region, the product may not perform as stated in the specications.
No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by
any means, electronic, mechanical, or otherwise, without the prior written permission of EIZO Corporation.
EIZO Corporation is under no obligation to hold any submitted material or information condential unless
prior arrangements are made pursuant to EIZO Corporation’s receipt of said information. Although every
effort has been made to ensure that this manual provides up-to-date information, please note that EIZO
monitor specications are subject to change without notice.

3
CONTENTS
CONTENTS
CONTENTS............................................................. 3
Chapter 1 Basic Operations and Functions .... 4
1-1. Basic Adjustment menu operations........... 4
1-2. Functions ....................................................... 6
Chapter 2 Adjusting Screens ............................ 7
2-1. Compatible Resolutions .............................. 7
2-2. Setting the Resolution ................................. 7
2-3. Adjusting the Color....................................... 8
●Selecting the display mode (CAL Switch
Mode) .............................................................. 8
●Performing advanced adjustments ................. 9
●Adjustable settings in each mode ................... 9
●Adjusting Brightness ....................................... 9
●Adjusting Contrast ..........................................10
●Adjusting Temperature ...................................10
●Adjusting Gamma ...........................................11
●Adjusting Hue .................................................11
●Adjusting Saturation .......................................11
●Adjusting Gain ................................................12
2-4. Selecting Screen Size .................................12
Chapter 3 Setting the Monitor......................... 13
3-1. Switching among Input Signals .................13
3-2.
Setting Input Signal Switching Procedure ...13
3-3. Skipping Display Modes That Are Not
Used...............................................................14
3-4. Setting Language.........................................14
3-5. Showing Monitor Information.....................14
3-6. Displaying or Hiding the EIZO Logo ..........15
3-7. Locking Operation Switches ......................15
3-8. Rotating the Image ......................................16
3-9. Selecting the Input Signal for DDC
Communication............................................17
3-10. Enabling/Disabling DC5V Output...............17
3-11. Displaying or Hiding the Grayscale
Warning.........................................................18
3-12.
Enabling/Disabling Sharpness Recovery ...18
3-13. Setting the Preferred Refresh Rate............19
3-14. Switching the DisplayPort Version
between 1.2 and 1.1......................................19
3-15. Resetting to Default.................................... 20
●Resetting the color adjustments ................... 20
●Resetting all adjustments to defaults ............ 20
Chapter 4 Controlling Monitor Quality........... 21
4-1. Executing Calibration..................................21
●Executing SelfCalibration ...............................21
●Viewing SelfCalibration result ........................21
4-2. Checking Grayscale.................................... 22
●Executing Grayscale Check .......................... 22
●Viewing Grayscale Check result ................... 22
4-3. Acquiring Life Prediction Data.................. 22
4-4. Setting On/Off for Warning and QC
History.......................................................... 23
Chapter 5 Power Saving Functions ................ 24
5-1. Setting Power Save..................................... 24
5-2. Adjusting the Brightness of Indicator...... 24
5-3. Setting DisplayPort Power Save ............... 25
5-4. Setting the Power Saving Mode When a
Person Leaves the Monitor........................ 25
Chapter 6 Troubleshooting.............................. 27
6-1. No picture .................................................... 27
6-2. Imaging problems....................................... 28
6-3. Other problems ........................................... 29
●Error code table............................................. 30
Appendix.............................................................. 31
LIMITED WARRANTY .............................................31

4Chapter 1 Basic Operations and Functions
Chapter 1 Basic Operations and Functions
1-1. Basic Adjustment menu operations
1. Displaying Adjustment Menu
1. Touch one of the switches (excluding ).
switch
2. The guide is displayed.
3. Select to display the Adjustment menu.
2.
Adjusting/Setting
1. Choose a menu to adjust/set with or , and then choose .

5
Chapter 1 Basic Operations and Functions
2. Choose an item to adjust/set with or , and then choose .
3. Adjust/set the selected item with , and then choose .
3.
Exiting
1. Choose a few times. The Adjustment menu nishes.

6Chapter 1 Basic Operations and Functions
1-2. Functions
The following table shows all the Adjustment menu’s adjustment and setting menus.
Main menu Item Reference
CAL Switch Mode Mode “2-3. Adjusting the Color” (page 8)
Brightness
Contrast
Temperature
Gamma
Hue
Saturation
Gain
Reset
RadiCS SelfQC SelfCalibration “4-1. Executing Calibration” (page 21)
Grayscale Check “4-2. Checking Grayscale” (page 22)
LEA “4-3. Acquiring Life Prediction Data” (page 22)
Settings “4-4. Setting On/Off for Warning and QC History” (page 23)
Signal Picture Expansion “2-4. Selecting Screen Size” (page 12)
Preference Input “3-1. Switching among Input Signals” (page 13)
Auto Input Detection “3-2. Setting Input Signal Switching Procedure” (page 13)
Power Save “5-1. Setting Power Save” (page 24)
Indicator “5-2. Adjusting the Brightness of Indicator” (page 24)
Presence Sensor “5-4. Setting the Power Saving Mode When a Person Leaves
the Monitor” (page 25)
Mode Skip “3-3. Skipping Display Modes That Are Not Used” (page 14)
Monitor Reset “3-14. Switching the DisplayPort Version between 1.2 and 1.1”
(page 19)
Languages “3-4. Setting Language” (page 14)
Information “3-5. Showing Monitor Information” (page 14)
Administrator
Settings
On-Screen Logo “3-6. Displaying or Hiding the EIZO Logo” (page 15)
Key Lock “3-7. Locking Operation Switches” (page 15)
Image Rotation “3-8. Rotating the Image” (page 16)
DDC “3-9. Selecting the Input Signal for DDC Communication” (page
17)
DC5V Output “3-10. Enabling/Disabling DC5V Output” (page 17)
DP Power Save “5-3. Setting DisplayPort Power Save” (page 25)
Grayscale Warning “3-11. Displaying or Hiding the Grayscale Warning” (page 18)
Sharpness Recovery “3-12. Enabling/Disabling Sharpness Recovery” (page 18)
Signal Format “3-13. Setting the Preferred Refresh Rate” (page 19)
“3-14. Switching the DisplayPort Version between 1.2 and 1.1”
(page 19)
*1 The adjustment/settings available on “CAL Switch Mode” depend on the selected mode. (See “Adjustable
settings in each mode” (page 9).)

7
Chapter 2 Adjusting Screens
Chapter 2 Adjusting Screens
2-1. Compatible Resolutions
For compatible resolutions of this product, refer to Instruction for Use "Compatible Resolutions".
2-2. Setting the Resolution
Windows 10
1. Right-click the mouse anywhere on the desktop except on icons.
2. From the displayed menu, click “Display Settings”.
3. On the "Customize your display" dialog box, click "Advanced display settings".
4. Select a monitor, then choose a resolution from the "Resolution" pull-down menu.
5. Click the "Apply" button.
6. When a conrmation dialog box is displayed, click “Keep changes”.
Windows 8.1/Windows 8/Windows 7
1. For Windows 8.1/Windows 8, click the "Desktop" tile from the Start screen.
2. Right-click the mouse anywhere on the desktop except on icons.
3. From the displayed menu, click “Screen resolution”.
4. Select a monitor, then choose a resolution from the "Resolution" pull-down menu.
5. Click the "OK" button.
6. When a conrmation dialog box is displayed, click “Keep changes”.
Note
• If you want to change the size of displayed characters and other items, select "Display" from Control Panel
and change the zoom percentage.
Windows Vista
1. Right-click the mouse anywhere on the desktop except on icons.
2. From the displayed menu, click “Personalize”.
3. On the “Personalization” window, click “Display Settings”.
4. On the “Display Settings” dialog box, select the “Monitor” tab and select desired resolution in the
“Resolution” eld.
5. Click the "OK" button.
6. When a conrmation dialog box is displayed, click “Yes”.
Mac OS X 10.8 and later
1. Select “System Preferences” from the Apple menu.
2. When the “System Preferences” dialog box is displayed, click “Displays”. (For Mac OS X 10.8,
click "Displays" for "Hardware".)
3. On the displayed dialog box, select the “Display” tab, then choose "Change" for “Resolutions”.
4. The list of selectable resolutions is displayed. Select the desired resolution. If the desired
resolution is not displayed in the list, hold down the Option key and select “Change”.
5. Your selection will be reected immediately.When you are satised with the selected resolution,
close the window.

8Chapter 2 Adjusting Screens
Mac OS X 10.7
1. Select “System Preferences” from the Apple menu.
2. When the “System Preferences” dialog box is displayed, click “Displays” for “Hardware”.
3. On the displayed dialog box, select the “Display” tab, then choose a desired resolution in the
“Resolutions” eld.
4. Your selection will be reected immediately.When you are satised with the selected resolution,
close the window.
2-3. Adjusting the Color
●Selecting the display mode (CAL Switch Mode)
A desired mode can be selected easily according to the monitor application.
Display Modes
√: Calibration is available.
Mode Purpose
1-DICOM Applies gradation characteristics compliant with DICOM Part 14. √
2-CAL1 Displays the screen adjusted by calibration software. √
3-CAL2
4-Custom Selected for dening a desired set of parameter settings. -
5-sRGB Suitable for color matching with sRGB compatible peripherals. -
6-Text Suitable for displaying texts for word processing or spreadsheets. -
Procedure
1. Touch one of the switches (excluding ).
The guide is displayed.
2. Select .
The mode menu appears at the bottom right of the screen.
1-DICOM
↓ ↑
2-CAL1
↓ ↑
3-CAL2
↓ ↑
4-Custom
↓ ↑
5-sRGB
↓ ↑
6-Text
Example
3. The mode among the list is highlighted in turn each time is pressed.
You can switch the mode with or while the mode menu is displayed.
Note
• The Adjustment menu and the Mode menu cannot be displayed at the same time.

9
Chapter 2 Adjusting Screens
●Performing advanced adjustments
“CAL Switch Mode” of the Adjustment menu allows you to congure and save a separate set of color
settings for each mode.
Attention
• As it takes about 15 minutes for the performance of electrical parts to stabilize, adjust the monitor 15 minutes
or more after the monitor power has been turned on.
• The same image may be seen in different colors on multiple monitors due to their monitor-specic
characteristics. Make ne color adjustment visually when matching colors on multiple monitors.
Note
• The values shown in “%” or “K” are available only as reference.
●Adjustable settings in each mode
The adjustable settings depend on the mode. (You cannot select any non-adjustable or non-settable
function.)
√: Adjustable, - : Unadjustable
Function
CAL Switch Mode
1-DICOM 2- CA L1
3-CAL2 4-Custom 5-sRGB 6 -Text
Brightness √√√√√
Contrast - - √ √ √
Temperature - - √ √ √
Gamma - - √ √ √
Hue - - √ √ √
Saturation - - √ √ √
Gain - - √ √ √
Reset √√√√√
●Adjusting Brightness
The screen brightness is adjusted by changing the brightness of the backlight (light source from the
LCD back panel).
Setting Range
0 to 100%
Procedure
1. Select "CAL Switch Mode" of the Adjustment menu, and choose .
2. Select “Brightness” from “CAL Switch Mode”, and choose .
3. Use or for adjustment.
4. Select after completing the setting.
Note
• If you think the image is too dark even when the brightness is set to 100%, adjust the contrast.

10 Chapter 2 Adjusting Screens
●Adjusting Contrast
The luminance of the screen is adjusted by varying the video signal level.
Setting Range
0 to 100%
Procedure
1. Select "CAL Switch Mode" of the Adjustment menu, and choose .
2. Select “Contrast” from “CAL Switch Mode”, and choose .
“Contrast” appears.
3. Use or for adjustment.
4. Select after completing the setting.
Note
• In the contrast of 100%, every color gradation is displayed.
• When adjusting the monitor, it is recommended to perform the brightness adjustment which may not lose the
gradation characteristics, prior to the contrast adjustment.
• Perform the contrast adjustment in the following case.
- If you think the image is too bright even when the brightness is set to 0% (Adjust the contrast to 100% or
less.)
●Adjusting Temperature
The color temperature can be adjusted.
The color temperature is normally used to express the hue of “white” and/or “black” by a numerical
value. The value is expressed in degrees “K” (Kelvin).
The screen becomes reddish at a low color temperature, and bluish at a high color temperature, like
the ame temperature. The gain preset values are set for each color temperature setting value.
Setting Range
Native, 6000K to 15000K (in increments of 100K), sRGB, User
Procedure
1. Select "CAL Switch Mode" of the Adjustment menu, and choose .
2. Select “Temperature” from “CAL Switch Mode”, and choose .
3. Use or for adjustment.
4. Select after completing the setting.
Note
• “Gain” allows you to perform more advanced adjustments (refer to “Adjusting Gain” (page 12)).
• If you set “Native”, the image is displayed in the preset color of the monitor (Gain: 100% for each RGB).
• When gain is changed, the color temperature is changed to “User”.