Radiocrafts RC11x0DK-RC232 User manual



RC11x0DK-RC232
2008 Radiocrafts AS RC11x0DK-RC232 Quick Start (rev. 1.0) Page 1 of 2
RC11x0DK-RC232 Quick Start
Quick Start Guide
1. Set up each board as illustrated in the picture
2. Download the latest version of RCTools-RC232 from www.radiocrafts.com and install
as described in the RCTools Installation Guide.
Connect to
serial port
Connect to
power
Ensure that RXD
and TXD jumper
are mounted
Ensure that the
power jumper is
mounted
Connect the
antenna



RC11x0DK-RC232
2008 Radiocrafts AS RC11x0DK-RC232 Quick Start (rev. 1.0) Page 2 of 2
3. Open RC232-CCT and follow the step-by-step guideline to send a message. For
details please see CCT User Manual or the RCTools Help file.
Contact Information
Radiocrafts AS
Sandakerveien 64
NO-0484 OSLO
NORWAY
www.radiocrafts.com
[e-mail]
[e-mail]
[e-mail]
Tel: [phone]
Fax: [phone]
1.Connect to
the correct
COM port
2.Enter
Configuration
mode
3.Change
mode if
needed. See
RC1180-
RC232 data
sheet for
details
4.Enter
Normal Mode
5.Type in the
message to
send.. See
RC1180-
RC232 data
sheet for
details.
6.Send the
message.
7. Messages received from the other
RC1180-RC232 board will appear in
this window.