RadioLink PRM-03 User manual

RadioLink Electronic Limited
www.radiolink.com
OSD Information Telemetry Module PRM-03
User Manual
Compatible with receiver: R12DS, R9DS
Compatible with transmitter: AT10II/AT10/AT9S Pro/AT9S/AT9
Compatible with flight controller: Mini Pix/PIXHAWK/TURBO PiX/APM

RadioLink Electronic Limited
www.radiolink.com
Contents
Introduction...................................................................................................................................3
Specifications ................................................................................................................................3
Connection.....................................................................................................................................4
Displaying Effect...........................................................................................................................8

RadioLink Electronic Limited
www.radiolink.com
Introduction
OSD Telemetry Sensor: PRM-03
Real-time model data allows users to receive crucial information on the
model's systems.
With flight module PRM-03 and flight controller PIXHAWK/Mini
Pix/TURBO PiX/APM, model voltage, speed, climb, throttle, longitude,
latitude, altitude, GPS, RSSI, flight mode, yaw, roll, pitch, and distance are
display on the transmitter (AT10II/AT10/AT9S Pro/AT9S/AT9) screen.
Configurable sound/message alarms signal potential problems when low
model voltage. A low model voltage alarm value can be customized.
Specifications
①Name:

RadioLink Electronic Limited
www.radiolink.com
②Model: PRM-03
③Dimensions: 27*13mm (1.06"*0.51")
④Weight: 6g(0.21oz)
⑤Compatible flight controller: Mini Pix/PIXHAWK/TURBO PiX/APM
⑥Compatible receiver: R12DS, R9DS (Old version receiver: R10DS, R10D,
R9D)
⑦Compatible transmitter: AT10II/AT10/AT9S Pro/AT9S/AT9
⑧PRM-03 can telemetry Speed, Rise, Throttle, Voltage, Longitude,
Latitude, Altitude, GPS, RSSI, Flight Mode, YAW, ROLL, PITC, Distance.
⑨PRM-03 is compatible with 1 cell to 12 cells battery(3.7~50.4V).
Pay Attention: The old version AT9 and AT10 have to upgrade the
firmware when if use PRM-03 to telemetry OSD information. AT9 have to
upgrade firmware at least to the version V1.2.6(OSD) and AT10 have to
upgrade firmware at least to V1.0.6(OSD).
Connection
(1) Connect one end of the telemetry module PRM-03 to
R9D/R9DS/R10D/R10DII/R10DS/R12DS and the other end to battery if
you just need feedback battery voltage. Same function as RadioLink
PRM-01 if you connect like that.

RadioLink Electronic Limited
www.radiolink.com

RadioLink Electronic Limited
www.radiolink.com
(2) If you want to feedback Speed, Rise, Throttle, Voltage, Longitude,
Latitude, Altitude, GPS, RSSI, Flight Mode, YAW, ROLL, PITC, Distance
information, please connect one end of the OSD information telemetry
module PRM-03 to R9D/R9DS/R10D/R10DII/R10DS/R12DS and the
other end to the TELEM port of PIX or APM.
For example: connect to PIXHAWK

RadioLink Electronic Limited
www.radiolink.com
The information will display on the RECEIVE menu.

RadioLink Electronic Limited
www.radiolink.com
Displaying Effect