PMS 348 + HALFTONES
·
·
·
·
·
1
56
23
4
1
2
3
4
5
6
7
BLACK + HALFTONES
ESP-LXME Controller Quick Reference Guide
Programming Questions?
Call 1-800-RAINBIRD
www.rainbird.com/ESPLXME
OR
For Advanced
Programming
Options, refer to
the ESP-LXME
Controller
Manual
P/N: 637762-11
Test All Stations / Check System
Set Station Run Times
Set Current Time
CU STOM
ODD
ODD31
EVEN
CYCLI CAL
Review Program
Program Run Time
Station RunTime
Program Summary
Test All Stations
Raster Wiring Test
Confirm Programs
1. Watering Start Times
2. Days To Water
3. Station Run Times
STEPS REQUIRED
FOR OPERATION:
Set Language
Set Days To Water - Custom Cycle Set Station Run Times
Manual Watering
Start Program
Watering Day Cycles
Set Current Date Set Current Time
Set Watering Start Times
Test All Stations / Check System
Alerts user to conditions
that prevent watering.
See the Alarm button in the
Auto dial position for alarm
messages.
Alarm Message Action
Station Short Run Raster Test - turn dial
to Test All Stations.
Check / reinsert modules.
Turn dial to Module Status
and select View Flow Alarms.
No Modules or
No Base Module
Flow Alarm (only if
optional Flow Smart
Module is installed) Active flow being monitored
by flow sensor.
Optional Flow Smart Module LED
Flashing
(blue)
Module not recognized - reinstall.
Station Short - run Raster Test.
Recognizing module properly.
Programming a station.
Station is currently running.
LED not lit
(dark)
Flashing
(red)
Station and Base Module LED
Solid
(red)
To verify: turn dial to Test All Stations / Check
select Confirm Programs and review the Program Summary.
System,
Manual Watering
Start Station
Set Watering Start Times
Advanced Settings
Manual Watering
AUTO OFF
To Cancel
3 Seconds
Manual Watering
MON
TUE
WED
THU
FRI
SAT
SUN
AUTO To Cancel
3 Seconds
OFF
Set Current Date
Special Features
Manual Watering Options
Troubleshooting
Basic Programming
No controller power.
No station activity - check Run Time,
Start Time and/or Days to Water.
Module not recognized - reinstall.
·
·
·
°
°
°
°
