RAPIBREW FREDDA 1.0 User manual

AI Rapid Cold Brew Maker
User Manual

- Appliances can be used by persons with reduced physical, sensory
or mental capabilities or lack of experience and knowledge if they
have been given supervision or instruction concerning use of the
appliance in a safe way and if they understand the hazards
involved.
- Children shall not play with the appliance.
- Always disconnect the appliance from the power supply if it is left
unattended and before assembling, disassembling or cleaning.
- If the power supply cord is damaged, it must be replaced by the
manufacturer, its service agent.
Please read this manual carefully and keep it properly.

FREDDA is a brand-new type of cold brew maker.
FREDDA, with patented and patent pending technologies for cold
brew extraction in various countries, creates a new and efficient
technique for cold brewing.
Through precise digital parameter control and accompanying cloud
services, cold coffee and tea brewing process can be completed in
just 3-5 minutes, which creates the most refreshing,
pure, layered, smooth and mellow taste.

Features & Overview ......................................................................................................1
Operation Panel ..............................................................................................................2
Coffee Brewing Guide .....................................................................................................3
Coffee Brewing Process ..................................................................................................4
Cleaning & Maintenance .................................................................................................5
Important Safeguards .....................................................................................................9
Contact Us .....................................................................................................................10
Contents

Features & Overview
• The patented and patent pending technologies for cold brew extraction presents
the best flavor of cold-extracted coffee and tea.
• Quick, ready-to-drink process (3-5 minutes) that is efficient and enhances the
beverage quality
• Intelligent digital interface allows adjustment of parameters and formula creation
for experts.
• Stable and consistent quality of cup output with high-precision digital control
system.
Status light
Top inner
cover
Stirrer
Ground tray
Operation panel
Top cover
Upper pot
Filter
Lower pot
Filter
1

Operation Panel
Button Function
Recipe
button
Click to switch between recipe A/B/C.
Clean
program
button
•Short press for 1 second to select general cleaning mode.
•Long press for 3 seconds to select detergent cleaning mode.
START
button
•Short press for 1 second to start beverage-making or cleaning program, or
stop the beverage-making process.
•Long press for 5 seconds to start forced extraction mode (can be performed
before the upper and lower pots are moved at the end of the same
extraction procedure). Short press again during operation to stop forced
extraction.
On/Off
button
•Use the On/Off button to power on or off the cold brew maker or to start or
stop the brew cycle.
•To end the brew cycle, press the On/Off button once and press again to
restart the cold brew maker.
On/Off
button
START
button
Recipe
button
Clean program
button
Bluetooth
connection
Wi-Fi
connection
Abnormal
indicator
Upper pot
indicator
Lower pot
indicator
Clean
indicator
2
Recipe
indicator

Coffee Brewing Guide
First-time use of FREDDA
• Brew Ratio : 1:10~1:8 (recommended)
• Grind Size : Between fine to medium and medium to coarse
• Water Temperature : 4°C~40°C (recommended). Do not go over 40°C.
• Ground coffee and water in the upper pot should not exceed the Max mark.
• Maximum output capacity : 750 ml
Adjust FREDDA parameters
• Download the RAPIBREW FREDDA app from Google Play Store or App Store for a
better experience.
• The default Bluetooth passcode of the app to connect with FREDDA is “0000”.
3

4
Notes:
• If the coffee extraction is completed
during the extraction process, short press
the Start button for 1 second to stop
extraction.
• Do not detach the upper and lower pots if
there is liquid remaining in the upper pot
after the extraction process is completed.
Long press the Start button for 5 seconds
to start force extraction and short press
the Start button for 1 second to stop
force extraction.
1. Place the filter paper into the filter
module.
2. Press pressure ring over the filter
paper.
3. Put the filter module into the upper
pot and press down firmly to the
bottom of the pot.
4. Position upper and lower pots.
5. Pour coffee grounds and water into
upper pot; then close the top cover.
6. Click Recipe button continuously
until the selected recipe light is on.
7. Click START button to operate when
the light indicators of upper and
lower pots are on.
8. Brewing begins according to recipe
setting. Status light blinks showing
brewing is in progress.
9. The sealing platform rises once
process completes. Take the lower
pot out and enjoy coffee.
Coffee Brewing Process

5
3. Remove pressure ring and discard
filter paper.
6. Rotate counterclockwise to remove
and rinse the ground tray if coffee
grounds drop on the tray. Clean and
wipe dry. Install it clockwise.
1. Take out the filter module.
2. Turn pressure ring to collect coffee
grounds.
4. Wash filter module, upper and lower
pots well, and make sure that there
is no residue left in the bottom filter
of the upper pot.
5. Wipe off any coffee liquid on the
ground tray.
Cleaning & Maintenance
Wash filter module, upper pot, lower pot, and ground tray after each use.

6
Top cover cleaning
Attach ground tray properly.
1. Take off stirrer.
2. Take off top inner cover.
3. Wipe lid and stirrer dry. Install them
in order.
Ground tray cleaning
Clean ground tray well before use.
1. Wipe off any coffee liquid on the
ground tray.
2. Rotate counterclockwise to remove
and rinse the ground tray if coffee
grounds drop on the tray.
3. Avoid coffee grounds from dropping
into the pipe which can damage
FREDDA. Clean and wipe dry. Install
it clockwise.
Cleaning & Maintenance
Cleaning frequency can be adjusted according to actual use.

7
3. Wipe the sealing platform clean. 1. Pour 500ml water (below 40°C) in
the upper pot.
2. Select Clean program button and
click START button.
Cleaning & Maintenance
Clean pipes with water
Pipe cleaning frequency depends on conditions of use.
Please clean when encountering the scenarios below:
• When the cleaning light is on
• Before use each day
• After the last use each day
• When brewing different coffee beans

8
1. Long press the Clean button for
3 seconds to choose Detergent-
cleaning mode. The CLEAN and
START lights will flicker.
2. Fetch about 500ml of clean water at
20-40°C in a container. Put in the
detergent powder or tablet and stir
well.
3. Place the cleaned upper and lower
pots. Pour detergent into upper pot.
Tighten upper lid.
4. Press START to begin. Let the
detergent soak in the pipe for
5 minutes and pump it to complete
cleaning until the platform is
elevated.
5. Pour in about 500ml clean water at
20-40°C inside. Select Water-clean
mode. Clean pipe for at least 3 times
until there is no residue in it.
6. Clean the lower pot after elevating
the platform. Wipe the bottom of
the platform with a soft wet cloth.
7. Brew any coffee to remove the smell
of the detergent before the next use.
Cleaning & Maintenance
Clean pipes with detergent
It is suggested to clean the pipe with detergent after cleaning it with water after use.
Depending on the frequency of use, adjust detergent wash time.

9
1. Please read all instructions before use.
2. Use only FREDDA exclusive accessories. Install all parts before you begin operation.
3. The upper pot, lower pot, filter, ground tray, stirrer, and top inner cover can be
removed for cleaning. Do not immerse FREDDA into water or other liquid except for
the above mentioned parts.
4. If FREDDA accidentally falls into liquid, first unplug the machine; then take out the
coffee machine immediately.
5. FREDDA can only use cold water. Do not pour water over 40°C to avoid damage to
FREDDA.
6. During operation, opening the lid or unplugging the power cord can result in
abnormal interruption. Besides damaging the stirrer, the flavor of used ingredients
may be spoiled because of interrupted process. When it is necessary to stop
brewing, please press On/Off button to turn off the power. Press On/Off button again
to turn on the power to make sure mechanical components and processes return to
initial settings.
7. Before you install or remove any detachable part or pots, make sure FREDDA is
powered off or in standby.
8. Install the ground tray before positioning the upper pot. Make sure the ground tray is
properly installed before taking off the top inner cover and stirrer to avoid any coffee
grounds from dropping into the pipe.
9. Replace pots if cracked or damaged. Cracked or damaged pots may cause failed
operation.
10. Do not use corrosive cleaning agents to wipe or clean the casing and accessories.
11. Repairs should only be performed by authorized personnel. Do not disassemble
components by yourself to avoid personal injury, machine damage, or other
unexpected risks.
12. Make sure that the operating voltage is 100~240V.
Important Safeguards

10
Website
RAPIBREW.COM
E-mail
[email protected]
Contact Us