Raptor R8 User manual

APTOR
R
APTOR
RAPTOR R8- Quick Start

OVERVIEW
Rear cameraLoud speakerBack case screwsMain screenPowerExternal headsetEar phoneSIM CardVolume +Volume -Menu softkeyUSB ConnectorMICBack softkeyHomeFRONTBACKFront cameraHand strap mount pointLogo SpaceSD Card

ACCESSORIES
Screen protector - Pre-fitted, giving protection for your device screen against scratches.The following accessories are included with every Raptor R8:Power supply - Country specific power supply used for charging.Vehicle Charger - 12/24v USB charger to charge device whilst in vehicle.OTG Cable - “On the go” cable for connecting external peripherals via USB.USB Cable - USB cable for charging and syncing via PC or power supplies.

BUTTONS
Volume +: Increase volume of speaker and earpiece while in call.Bellow there’s a list of the buttons of the Raptor R8 and their respective descriptions. Volume -: Decrease volume of speaker and earpiece while in call.Power: Used to switch device on, or put/wake device into/out of standby mode.Home: The Android “Home” button brings the device to the home screen.Menu soft key: The Android “menu” key brings up the menu feature and will behave differently depending on what app you are running at the time Back soft key: The Android “Back” key will revert to the last app/page in the application stack running on the device.PowerVolume +Volume -Menu softkeyBack softkeyHome

ATTACHING THE SCREEN PROTECTOR
Attaching the screen protector following these instructions:All Raptors are provided with a screen protector which must be used in order to maintainthe warranty of the device. A screen protector not only helps defend against scratchesand knocks to the screen, but it will also helps prolong the life of your device.Step 1: Check if there isn’t already a screen protector on the device. Most Raptor devices have one pre-attached in the box.Step 2: Remove the old screen protector if necessary by simply peeling it of. Now make sure you clean the screen thoroughly to remove dirt, dust and any fluff that will create bubbles in the adhesion.Step 3: Peel the underside of the screen protector off, being careful not to let it touch anything.Step 4: Now carefully line up the top of the screen protector with the top of the device LCD. Carefully let it drop onto the screen making sure it lines true all the way down to the bottom as yougo. Use a credit card to smooth out any bubbles as you go.Step 5: Once you’re happy, peel off the top protective layer of the screen protector off and you’re done!

STATUS BAR ICONS
The Android OS of the Raptor R8 device is constantly monitoring for new notificationsand status’ of the device. Apps can create there own icons but below are some of the more common ones with their meanings.Phone connection iconsStatus bar with iconsOther icons

CHARGING
The Micro USB connector on the device along with the USB lead and chargers provided are used to charge your device safely.Charging your device using domestic charger:Step 1: Pull open the rubber cover at the bottom of the device marked with the USB symbol.Step 2: Insert the micro USB end of the provided USB cable carefully into the Micro-USB connector in the device. Please ensure you are careful when doing this, as Micro-USB connectors can be easily damaged if not used correctly.Step 3: Plug the other side of the cable into either the USB-A socket of the Domestic or vehicle charger.Please note: only the supplied power units and cables must be used. Third party accessories have not been tested with Raptor devices and could cause electrical and physical harm to the connectors and the device. USB Connector

SYNCING & CONNECTING ACCESSORIES
The Micro USB connector can also be used to connect and sync your device with other accessories or devices.How to connect your device with a PC:Step 1: Pull open the rubber cover at the bottom of the device marked with the USB symbol.Step 2: Insert the micro USB end of the provided USB cable carefully into the Micro-USB connectorin the device, ensuring you are careful when doing this as Micro-USB connectors can be easily damaged if not used correctly.Step 3: Plug the other side of the USB cable into a free USB-A socket in your PC or laptop.Using the OTG (on the go) cableCarefully connect the cable into the device exactly the same as described above. The other end of the OTG cable is a USB-A socket. You can now connect any device with a USB connector into this socket. For example a keyboard or barcode scanner and the device should be able to automaticallycommunicate with it.USB Connector

CONNECTORS
The connectors allow external peripherals to be connected to the device. Bellow thereis an explaination of the connectors and their location.USB connector - Standard Micro-USB connector used for charging the device, syncing with a PC or to host USB communication via the supplied OTG cable..External headset - Stereo DIN connector for use with supplied headset/MIC. Can be used for making phone calls and for listening to music etc on the device discretely.External headsetUSB ConnectorAll connectors have rubber covers which are required to maintain the IP rating of the device. To use the connector, simply pull up on the tab of the rubber cover to expose the connector underneath.

REPLACING THE BATTERY AND CARDS
The battery in the Raptor R8 is sealed and cannot be removed or replaced by the user. If you require the battery to be changed then please contact our support centre who will be happy to help.The Raptor R8 has a single, Micro SIM sized SIM card slot, that will allow you to connect the device to the phone and 3G networks. The SIM card is inserted into the side of the device.Raptors use standard SIM card sizes and can be used with a SIM card adapter if your SIM is a different size.To install a SIM card: 1. Gently pull the rubber cover out.2. Slide your SIM card into the exposed slot.3. Replace the rubber cover.
1
Battery is built in and sealed in the Raptor R8 and case screws must not be tampered with.The Raptor R8’s onboard storage memory can be expanded using a MicroSD card.To remove or install a micro-SD card:•Gently pull the rubber cover out.•Push the MicroSD card into the slot.•Push the card slightly to pop it out and remove it.Installing a SIM cardInstalling a MicroSD card

MAINTAINING RUGGEDNESS
Your Raptor device is fully rugged, however you must be careful to use the device correctly to ensure it remains rugged at all times.Connector rubber covers: Must be kept securely fitted at all times to ensure maximum IP rating of the device. When using connectors make sure to only use supplied accessories to be careful to not allow water or dust to enter the device.Be careful not to expose the device to water or dust when swapping out the battery, SIM or SD cards.Case screws: Must never be tampered with otherwise water/dust ingress can be compromised. If you believe case screws are loose, then please inform Raptor support immediately.Prolonged immersion: In water is not recommended. Whilst you Raptor can be submerged in water, doing so for prolonged times, over the specified testing times can lead to water leaks.Casing: Check your device regularly for knocks or cracks in the casing. Your Raptor is rugged, however, multiple drops over time can compromise the case and seals, allowing water and dust to enter the device.External headsetUSB ConnectorSIM CardMicroSD CardCase screws