Raspberry Pi ARGON ONE Pi4 User manual

x Raspberry Pi &
ARGON ONE Pi4 Instruction Manual

ARGON ONE Pi 4 Parts
@
@ 40PinGPIO Access © Homo © 2xusB20
© Magnetic Removable Top @ Hom @ 2xusB3.0
@ Power Button © Audio/Video @ Gigabit Ethemet

Assembly Instructions
Connect Raspberry Pi to HDMI-Audio Board and stick
Silicon Thermal Pad.

“9 Carefully connect Raspberry Pi GPIO to Power and
}
Cooling Board.

Use shorter flat head screws to fasten Raspberry Pi
and HDMI-Audio Board assembly to top case.

1 © Use longer round head screws to fasten bottom cover
and place rubber footings.

a o = fo) a
U
<
6 = a ae
D
= a
s 2 O ne} 2 a oO a ”n S nel 2 o
(S)
a
n v
tC
o 7) £
5 |
t forget to PRESS Power Button to TURN ON
Don

| 1. Connect to the internet.
2. Open “Terminal” in Raspbian.
3. Type the text below in the “Terminal” to initiate
installationof Argon ONE Pi 4 script.
4. Reboot.
ee SS

ARGONONEPi4 —
Power Button Functions
The process above will automatically install the configuration that
will activate the Argon ONE Pi 4 Power Button with the following
functions.
TN=XeXo)\ KON = Wes
PI 4.STATE ‘e FUNCTION
Short Press
Long Press (>= 3 s)
Short press (<3's)
Double tap
Long Press (>= 5s)

Upon installation of the Argon ONE Pi 4 script by default, the
settings of the Argon ONE Pi 4 cooling system are as follows:
10%
55%
100%
However, you may change or configure the FAN to your desired
settings by clicking the Argon ONE Pi 4 Config icon on your
Desktop.
Or via “Teminal” by typing and following the specified format:
argonone-config
)
J

Uninstalling ARGON ONE Pi 4 Script
To uninstall the Argon ONE Pi 4 script you may do so by clicking
the Argon ONE Pi 4 Uninstall icon on your Desktop.
You may also remove the script via “Terminal” by typing:
hale (oyeleyel—teaebebmel-aot- mle
Always reboot after changing any configuration or uninstallation
for the revised settings to take effect.