Ratel RatTrap User manual

Quick Guide RatTrap
Mounting in concrete manhole
•Determine need for a guide rod
•Position mounting kit (and guide
rod)
•Mount the trap
•Lock the wire and fabric cord
•Test the system
Preparation:
•Insert the CO2 canister
•Secure the wire to the trap
•Select and mount the inlet
•Prepare the electronics
•Configure the trap in the app
Mounting in PVC manhole
•Position mounting kit
•Mount the trap
•Lock the wire
•Test the system
Guide rod
Fabric cord
Wire
Magnet is
passed over
communica-
tions module
Magnet is
passed over
communica-
tions module
Off On
Remember the rules for ATEX-
labeled equipment - please
refer to the manual

Quick Guide RatTrap
Relocating a trap
•Demount the trap and mounting kit
•Place magnet in repeater - use tape
•Deactivate transmitter in the trap
•Demount communications module
•Demount the trap in the app
•And all in reverse on the new
site…….
Service
•Demount the trap
•Change the CO2 canister
•Reset the kill counter
•Note it in the app
•Mount the trap
Replacement of the outer container or killing device
•Demount the trap
•Replace the outer container
or
•Replace the killing device without further action
•Mount the trap
12
New unit is activated as
per general
preparation
The “Replace” function
in the service menu in
the app is used
Off On