RATTAN WF285005AAD User manual

RATTAN HANGING PORCH SWING
ASSEMBLY INSTRUCTIONS
NOTE: 50% TIGHTEN BEFORE FIXING ALL BOLTS
WF285005AAKWF285005AAD

2
Notice:
1. 50% Tighten before fixing all screws, Allen wrench is
recommended instead of an electric drill.
2. Place the item on a flat ground to adjust and make sure
it remains stable.
3. Tighten up all screws with tools gradually.
4. If the screws are not aligned with holes during assembly,
please loosen all the other screws to 50% and continue
the assembly process.
5. If the item is not stable, please loosen all the screws,
adjust it on a flat ground and tighten up all screws again.
6. Note: If one or some screws are fully tightened during
assembly, chances are the others will not be aligned with
holes. In addition, all the holes are designed to be relatively
larger to provide more space for the adjustment of the screws .
A
E
F
F
D
B
C

Part List
3
Right Frame (1pc)
A
1
W6x1 Washers
Allen key M4 (1 pc)
2
B
D E
C
F
4
3
5
Bolt M6x40mm
Seat Frame (1pc)
Back Frame (1pc) Seat Cushion (1pc) Pillow (2pcs)
Left Frame (1pc)
Steel chain (2pcs)
Safety keychain (4pcs)
Hardware List
14 pcs + extra 2 pcs 14 pcs + extra 2 pcs

4
STEP 1
Connect Right frame (A), & Seat frame (C) with Bolt (1) & Washers (2)
STEP 2
Connect Part from STEP 1 & Left frame (B) with Bolt (1) & Washers (2)
CA
1
1
1
B1
1
1

5
STEP 3
Connect Part from STEP 2 & Back frame (D) with Bolt (1) & Washers (2)
1
1
1
1
D
STEP 4
Connect the parts of the Back frame (D) & Right frame (A) and
Left frame (B) completed in STEP 3 with Bolts (1) & Washers (2)
1
1
1
1
D
A
B

6
STEP 5
Connect Part from STEP 4 with Steel chain (3) & Safety keychain (4)
34
3
4
4
4
44
33

7
Finished
Put on Seat cushion (E) & Pillow (F) to complete Rattan Hanging Porch Swing
STEP 6
E
F
F