Raychem 910 Series Operating and maintenance instructions

Raychem-AR-H58490-910QuickStart-EN-1805 nVent.com
| 1
910 QUICK START GUIDE
AC alarm output
L1/Line in
L2/Neutral in
L1/Line out to heating cable
L2/Neutral out to heating cable
Communications
interface
type label
(optional)
Keypad
RTD, communications,
inhibit/override input,
alarm dry contact output
Communications status
indicators
Alarm status indicator
Output status indicator
HTCBus
communications address
FOUR MODES OF OPERATION
SCAN
Default mode displayed during normal operation. The console sequentially displays load current, temperature, and setpoint readings.
ALARM
Examine or reset any alarms that may exist. The LED above the ALARM key is illuminated while in this mode.
MONITOR
Examine any of the controller readings such as temperature, load current, etc. The LED above the MONITOR key
is illuminated while in this mode.
CONFIGURE
Access the console menus to examine or alter the settings. The LED above the CONFIG key is illuminated while in this mode.
ENTER
BACK
TEST
SHIFT
ALARM CONFIG
MONITOR
ENTER
BACK
TEST
SHIFT
ALARM MONITOR CONFIG
Press [SHIFT] Press [TEST]
ENTER
BACK
TEST
SHIFT
ALARM CONFIG
MONITOR
ENTER
SHIFT
CONFIG
Press [SHIFT] Press [BACK]
BACK
TEST
ALARM MONITOR
ENTER
BACK
MONITOR CONFIG
ENTER
BACK
TEST
SHIFT
ALARM CONFIG
MONITOR
SHIFT
Press [SHIFT] Press [ENTER]
TEST
ALARM
Reference the manual for complete installation instructions.

nVent.com | 2Raychem-AR-H58490-910QuickStart-EN-1805
FOUR MODES OF OPERATION
• Press [Shift] and the next key pressed is in use. Indicated by LED
light above.
• Use [▲▼ ] keys to change the numeric values.
• Press [Enter] to select or save.
• Press [Back] to exit menu and return to scan mode.
ACKNOWLEDGE AN ALARM
1 Press[Shift]+[Test].TheLEDabovethewordAlarmis
illuminated.
2 Thedisplaywillscrollthroughwhattypeofalarmisindicating.
3 Press[Enter]toresettheAlarm,use[▲▼ ] keys to navigate.
4 Press[Enter]againtosave.
CHANGE A SET POINT
1 Press[Shift]+[Enter].TheLEDabovethe
word Config is illuminated.
2 Press[Enter]againandthesetpointnumericvaluewillblink.
3 Use[▲▼ ] keys to change the numeric value.
4 Press[Enter]tosave.
ACCESS MAINTENANCE DATA
1 Press[Shift]+[Back].TheLEDabovethewordMonitoris
illuminated.
2 Use[▲▼ ] keys to scroll through the menu.
3 Scrolldownto“MaintenanceData...”Press[Enter].
4 Additionalsub-menuwillopenuptoviewmoredata.
NAVIGATING CONFIGURE MODE MAIN MENU
BASIC MODE MENU
Control Set Point
Lo TS 1
Lo Load`
Switch Control Mode
Circuit Breaker
Temperature Units
Feature Mode (Basic)
Control Set Point
Lo TS 1
Lo Load
Hi GFI
GFI Trip
Feature Mode (Advanced)
TS Alarms Configuration Sub-Menu...
Other Alarms Configuration Sub-Menu...
Point Setup Sub-Menu...
Misc. Setup Sub-Menu...
Communications Setup- Sub-Menu...
ADVANCED MODE MENU
*Please reference the manual for the complete
list of configuration sub-menus.
**Menuitemswithtrailing“...”indicatetheentrypoint
toa sub-menu.

©2018 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of their respective owners.
nVent reserves the right to change specifications without notice.
Raychem-AR-H58490-910QuickStart-EN-1805 3
Our powerful portfolio of brands:
CADDY ERICO HOFFMAN RAYCHEM SCHROFF TRACERnVent.com
North America
Tel [phone]
Fax [phone]
[email protected]
Europe, Middle East, Africa
Tel [phone]
Fax [phone]
[email protected]
Asia Pacific
Tel [phone]
Fax [phone]
[email protected]
Latin America
Tel [phone]
Fax [phone]
[email protected]