Raymarine hsb2 PLUS Reference guide

Quick Reference Card: hsb2PLUS Series Color LCD Radar Displays
86058_1
MULTI
Controls guard zone alarm sensitivity, and tuning the receiver.
Also controls display lighting and brightness.
- Press to display sliders.
Select a slider using the soft key or trackpad.
Toggle between Auto/Man or off/on by pressing key again.
Adjust slider using trackpad, and press ENTER to finish.
Press and hold MULTI key to set brightness to 100%.
Soft Key Labels:
Change when you press a key.
Default soft key labels are shown.
Trackpad
Controls cursor position on the screen, and also the sliders
and setup options.
Hold the trackpad down to move the cursor faster.
CLEAR
Cancels operation in progress and returns to the
previous display.
Deletes an object/function under cursor control.
ENTER
Confirms selection and (if appropriate) clears current
soft key labels. It performs the selected task,
accepts changes, or leads to display of more options.
When cursor text is displayed, takes cursor control
of the object.
When arrow-head cursor symbol is displayed, drops
the object under cursor control.
Soft keys
Press to select option, or highlight option or slider.
Labels change when you press soft/dedicated key.
Elipses (...) after the text indicate that pressing soft
key leads to a further display of soft key options.
POWER
Press and hold until unit beeps to turn on display.
Press to toggle between Standby and Transmit.
Press for 3 seconds to turn off display.
Press soft key to display required setup menu, then use trackpad
to select option and soft key to change setting.
Press ENTER to close menu, and CLEAR to to finish.
MENU
Provides access to setup options.
- Press to display soft keys.
DISPLAY
Controls display mode and windows.
- Press for display mode and soft keys display.
- Press again to toggle through display modes, and ENTER
- Press and hold for 2 seconds for full screen display of the upper
window.
MARKS / MOB
Controls placing marks, and Man Overboard function.
- Press to place mark at cursor position, and use trackpad
to move mark. Press ENTER to finish.
- Press and hold for 2 seconds to activate or cancel MOB.
VRM/EBL
Used to measure range and bearing to/between targets.
- Press to place VRM/EBL if one not already placed.
Adjust position using trackpad, and press ENTER to finish.
- Press to display soft keys if VRM/EBL already placed.
D5665_1
GAIN
Controls the presentation of radar targets.
GAIN controls background noise (speckle).
SEA controls sea clutter.
RAIN controls rain clutter around the vessel.
FTC controls rain clutter at a distance.
- Press for soft keys display.
RANGE
Controls range scale. Range scale and range rings are
shown in the Status Bar.
- Press top of key to increase the range scale.
- Press bottom of key to decrease the range scale.
- Press and hold to change the scale faster.
ALARMS
Used to control guard zones.
- Press to place guard zone if one not already placed.
Adjust size/shape using trackpad, press ENTER to finish.
- Press to display soft keys if guard zone already placed.
Select a slider using the soft key or trackpad.
Toggle between Auto/Man or off/on by pressing soft key again.
Adjust slider using trackpad, and press ENTER to finish.
50%
O
F
F75%
O
F
F
RAIN SEA
FTC GAIN
MANUAL MANUAL
Use soft key to toggle zone on or off.
Adjust size/shape using trackpad, and press ENTER to finish.
GUARD 1
OFF ON
GUARD 2
OFF ON
Use soft key to toggle VRM/EBL on or off.
Press FLOAT to access float options for existing VRM/EBL.
Press VRM/EBL DATABOX to toggle data box display off/on.
FLOAT¬
VRM/EBL2
OFF ON
VRM/EBL1
OFF ON
VRM/EBL
DATABOX
OFF ON
Press soft key to toggle window on/off, or return to full screen.
Zoom: Press ZOOM key to display zoom window option.
Move Zoom box using trackpad, press ENTER to finish.
SELECT
WINDOW
WINDOWS
OFF ON
SYSTEM
SET UP¬
RADAR
SET UP¬
ALARM
ON
25%
TUNE
A
U
T
O
LIGHT
75%
OOM...
MARPA
SET UP¬
MARPASCREENTARGETSHDG MODE

Context Sensitive Cursor Control
When the cursor is positioned over special features on the display,
a text label appears to identify the feature.
Depending on the feature, you can then move, re-size or delete it.
D5666_1
Text Label
BOX
CTR
EBL
FLT
GRD
MOB
MRK
SHM
VRM
VRM/EBL
ZMB
Feature
Data box (any type)
Radar centre
Electronic Bearing Line
Floating VRM/EBL
Guard zone corner or side
Man OverBoard Marker
Mark
Ship's Heading Marker
Variable Range Marker
VRM and EBL
Zoom box
Move (for example, an EBL)
1.
2.
3.
4.
Press the appropriate soft key to change the heading mode.
Press ENTER to finish.
Press the soft key to toggle INTerference REJection or Target
EXPANSION on/off.
Press the WAKES soft key until the required option (short, medium or long
wakes, or OFF) is highlighted. Press ENTER to finish.
Press CLEAR WAKES to clear existing wakes from the display.
Press the appropriate soft key to toggle on/off Cursor Readout Databox,
Range Rings, Data Boxes or Waypoint display. Press ENTER to finish.
Default Soft Keys
CURSOR
HDG MODE TARGETS SCREEN
BRG
RNG nm
045°
0.28
R
Landmass
Surface
vessel
Default soft key labels
These can be turned off; press any soft key to re-display them.
Different labels are displayed when you press a key.
Channel buoy
Range rings
The number and
spacing depend on
the current range, or
you can turn them off
Status Bar
Ship's Heading
Marker (SHM)
You can hide this
temporarily
Ship's position
You can move this
off-centre if required
Cursor position,
controlled by the
trackpad
Targets:
Bearing scale,
each tick indicating
2˚ of azimuth
Cursor position box
Shows the current
cursor position as
either Range/Bearing
or Lat/Long. You can
move this box to your
preferred position
on the screen, or
turn it off.
Default Display
COURSE UPNORTH UP HEAD UP
INT REJ
OFF ON
EXPANSION
OFF ON
WAKES
OFF S M L
CLEAR
WAKES
CRSR BOX
OFF ON
RNGE RNGS
OFF ON
DATABOXES
OFF ON
WAYPOINT
OFF ON
3nm 126°T AUTO
IR
RINGS
1/2 H-UP T
TM TV3
Status Bar
Selected range,
in nautical miles
Range ring interval
Not displayed if
range rings are off
Range rings
(displayed if
rings are on)
Current heading
if data available, or
Course Over Ground.
Displayed in degrees
Magnetic or True
Heading mode
Normally Head Up (H-UP);
Course Up (C-UP) or
North Up (N-UP) can be
selected if heading data
available
Mode Indicators
displayed when function on:
Target
Expansion
Wakes
Interference
Rejection
Auto mode
Gain, Sea,
Tune
FTC
(Remote rain)
Rain
Clutter
Guard Zone
Alarms
3nm 126°T AUTO WKS
FTC
EX
RC
GZ
IR
RINGS
1/2 H-UP GST
RM RV3
Motion Mode
Relative Motion
True Motion
Target Vectors
True Vector or
Relative Vector
and vector length
MARPA
TRUE REL
Delete (for example, an EBL)
1.
2.
Press the appropriate soft key to acquire or cancel the selected target.
Press the appropriate soft key to view the target data box or database list.
CANCEL
TARGET
MARPA BOX
OFF ON
ACQUIRE
TARGET
MARPA
LIST
MARPA
EBL
EBL
EBL
EBL
EBL