Now turn the assembled seat upright and
Before using your chair, ensure that all the
screws are tightened fully for safety. You
can now enjoy the comfort of your new
chair!
NOTE: Please keep the enclosed Allen
Wrench and check all screws every six
months to ensure they remain tightly
fastened.
locate the center hole of the Mechanism
over the Seat Post. Push down firmly until
the connection is secure.
A
C
G2
G1
G3
G4
H1
H2
G3
F
D
D
E
E
E
B
Press the Casters (A) into the holes at the
end of each leg of the Base (B). Insert the
bottom end of the Seat Post (C) in to the
Center hole of the Base (B).
For easy assembly, place the Seat Cushion
(E) face down on a flat surface. Attach the
Front of Mechanism (D) to the Seat (E)
using Screws (G2) and Washers (G3 & G4)
into the predrilled holes as shown in the
diagram above. But do not screw up
completely.
Attach the Mechanism (D) to the Seat
Cushion (E) using Screws
(G1) . Tighten
securely with the enclosed Allen
Wrench (I).
Attach the Backrest (F) to the Seat Cushion
(E) insert Screws (H1) and Washers (H2)
into the predrilled holes as shown in the
diagram above. Tighten securely with the
enclosed Allen Wrench (I).
GRAMERCY
